From: Sia Jee Heng <jee.heng.sia@intel.com>
To: vkoul@kernel.org, Eugeniy.Paltsev@synopsys.com
Cc: andriy.shevchenko@linux.intel.com, dmaengine@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 07/15] dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
Date: Mon, 12 Oct 2020 12:21:52 +0800 [thread overview]
Message-ID: <20201012042200.29787-8-jee.heng.sia@intel.com> (raw)
In-Reply-To: <20201012042200.29787-1-jee.heng.sia@intel.com>
Add support for device_prep_dma_cyclic() callback function to benefit
DMA cyclic client, for example ALSA.
Existing AxiDMA driver only support data transfer between memory to memory.
Data transfer between device to memory and memory to device in cyclic mode
would failed if this interface is not supported by the AxiDMA driver.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
---
.../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 182 +++++++++++++++++-
drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 2 +
2 files changed, 177 insertions(+), 7 deletions(-)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 1124c97025f2..9e574753aaf0 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -15,6 +15,8 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -575,6 +577,135 @@ dma_chan_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst_adr,
return NULL;
}
+static struct dma_async_tx_descriptor *
+dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
+ size_t buf_len, size_t period_len,
+ enum dma_transfer_direction direction,
+ unsigned long flags)
+{
+ struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+ u32 data_width = BIT(chan->chip->dw->hdata->m_data_width);
+ struct axi_dma_hw_desc *hw_desc = NULL;
+ struct axi_dma_desc *desc = NULL;
+ dma_addr_t src_addr = dma_addr;
+ u32 num_periods = buf_len / period_len;
+ unsigned int reg_width;
+ unsigned int mem_width;
+ dma_addr_t reg;
+ unsigned int i;
+ u32 ctllo, ctlhi;
+ size_t block_ts;
+ u64 llp = 0;
+ u8 lms = 0; /* Select AXI0 master for LLI fetching */
+
+ block_ts = chan->chip->dw->hdata->block_size[chan->id];
+
+ mem_width = __ffs(data_width | dma_addr | period_len);
+ if (mem_width > DWAXIDMAC_TRANS_WIDTH_32)
+ mem_width = DWAXIDMAC_TRANS_WIDTH_32;
+
+ desc = axi_desc_alloc(num_periods);
+ if (unlikely(!desc))
+ goto err_desc_get;
+
+ chan->direction = direction;
+ desc->chan = chan;
+ chan->cyclic = true;
+
+ switch (direction) {
+ case DMA_MEM_TO_DEV:
+ reg_width = __ffs(chan->config.dst_addr_width);
+ reg = chan->config.dst_addr;
+ ctllo = reg_width << CH_CTL_L_DST_WIDTH_POS |
+ DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_DST_INC_POS |
+ DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS;
+ break;
+ case DMA_DEV_TO_MEM:
+ reg_width = __ffs(chan->config.src_addr_width);
+ reg = chan->config.src_addr;
+ ctllo = reg_width << CH_CTL_L_SRC_WIDTH_POS |
+ DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
+ DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_SRC_INC_POS;
+ break;
+ default:
+ return NULL;
+ }
+
+ for (i = 0; i < num_periods; i++) {
+ hw_desc = &desc->hw_desc[i];
+
+ hw_desc->lli = axi_desc_get(chan, &hw_desc->llp);
+ if (unlikely(!hw_desc->lli))
+ goto err_desc_get;
+
+ if (direction == DMA_MEM_TO_DEV)
+ block_ts = period_len >> mem_width;
+ else
+ block_ts = period_len >> reg_width;
+
+ ctlhi = CH_CTL_H_LLI_VALID;
+ if (chan->chip->dw->hdata->restrict_axi_burst_len) {
+ u32 burst_len = chan->chip->dw->hdata->axi_rw_burst_len;
+
+ ctlhi |= (CH_CTL_H_ARLEN_EN |
+ burst_len << CH_CTL_H_ARLEN_POS |
+ CH_CTL_H_AWLEN_EN |
+ burst_len << CH_CTL_H_AWLEN_POS);
+ }
+
+ hw_desc->lli->ctl_hi = cpu_to_le32(ctlhi);
+
+ if (direction == DMA_MEM_TO_DEV)
+ ctllo |= mem_width << CH_CTL_L_SRC_WIDTH_POS;
+ else
+ ctllo |= mem_width << CH_CTL_L_DST_WIDTH_POS;
+
+ if (direction == DMA_MEM_TO_DEV) {
+ write_desc_sar(hw_desc, src_addr);
+ write_desc_dar(hw_desc, reg);
+ } else {
+ write_desc_sar(hw_desc, reg);
+ write_desc_dar(hw_desc, src_addr);
+ }
+
+ hw_desc->lli->block_ts_lo = cpu_to_le32(block_ts - 1);
+
+ ctllo |= (DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
+ DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS);
+ hw_desc->lli->ctl_lo = cpu_to_le32(ctllo);
+
+ set_desc_src_master(hw_desc);
+
+ /*
+ * Set end-of-link to the linked descriptor, so that cyclic
+ * callback function can be triggered during interrupt.
+ */
+ set_desc_last(hw_desc);
+
+ src_addr += period_len;
+ }
+
+ if (unlikely(!desc))
+ return NULL;
+
+ llp = desc->hw_desc[0].llp;
+
+ /* Managed transfer list */
+ do {
+ hw_desc = &desc->hw_desc[--num_periods];
+ write_desc_llp(hw_desc, llp | lms);
+ llp = hw_desc->llp;
+ } while (num_periods);
+
+ return vchan_tx_prep(&chan->vc, &desc->vd, flags);
+
+err_desc_get:
+ if (desc)
+ axi_desc_put(desc);
+
+ return NULL;
+}
+
static struct dma_async_tx_descriptor *
dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
unsigned int sg_len,
@@ -761,8 +892,13 @@ static noinline void axi_chan_handle_err(struct axi_dma_chan *chan, u32 status)
static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
{
+ int count = atomic_read(&chan->descs_allocated);
+ struct axi_dma_hw_desc *hw_desc;
+ struct axi_dma_desc *desc;
struct virt_dma_desc *vd;
unsigned long flags;
+ u64 llp;
+ int i;
spin_lock_irqsave(&chan->vc.lock, flags);
if (unlikely(axi_chan_is_hw_enable(chan))) {
@@ -773,12 +909,32 @@ static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
/* The completed descriptor currently is in the head of vc list */
vd = vchan_next_desc(&chan->vc);
- /* Remove the completed descriptor from issued list before completing */
- list_del(&vd->node);
- vchan_cookie_complete(vd);
- /* Submit queued descriptors after processing the completed ones */
- axi_chan_start_first_queued(chan);
+ if (chan->cyclic) {
+ vchan_cyclic_callback(vd);
+ desc = vd_to_axi_desc(vd);
+ if (desc) {
+ llp = lo_hi_readq(chan->chan_regs + CH_LLP);
+ for (i = 0; i < count; i++) {
+ hw_desc = &desc->hw_desc[i];
+ if (hw_desc->llp == llp) {
+ axi_chan_irq_clear(chan, hw_desc->lli->status_lo);
+ hw_desc->lli->ctl_hi |= CH_CTL_H_LLI_VALID;
+ desc->completed_blocks = i;
+ break;
+ }
+ }
+
+ axi_chan_enable(chan);
+ }
+ } else {
+ /* Remove the completed descriptor from issued list before completing */
+ list_del(&vd->node);
+ vchan_cookie_complete(vd);
+
+ /* Submit queued descriptors after processing the completed ones */
+ axi_chan_start_first_queued(chan);
+ }
spin_unlock_irqrestore(&chan->vc.lock, flags);
}
@@ -818,15 +974,25 @@ static irqreturn_t dw_axi_dma_interrupt(int irq, void *dev_id)
static int dma_chan_terminate_all(struct dma_chan *dchan)
{
struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+ u32 chan_active = BIT(chan->id) << DMAC_CHAN_EN_SHIFT;
unsigned long flags;
+ u32 val;
+ int ret;
LIST_HEAD(head);
- spin_lock_irqsave(&chan->vc.lock, flags);
-
axi_chan_disable(chan);
+ ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
+ !(val & chan_active), 1000, 10000);
+ if (ret == -ETIMEDOUT)
+ dev_warn(dchan2dev(dchan),
+ "%s failed to stop\n", axi_chan_name(chan));
+
+ spin_lock_irqsave(&chan->vc.lock, flags);
+
vchan_get_all_descriptors(&chan->vc, &head);
+ chan->cyclic = false;
spin_unlock_irqrestore(&chan->vc.lock, flags);
vchan_dma_desc_free_list(&chan->vc, &head);
@@ -1078,6 +1244,7 @@ static int dw_probe(struct platform_device *pdev)
/* Set capabilities */
dma_cap_set(DMA_MEMCPY, dw->dma.cap_mask);
dma_cap_set(DMA_SLAVE, dw->dma.cap_mask);
+ dma_cap_set(DMA_CYCLIC, dw->dma.cap_mask);
/* DMA capabilities */
dw->dma.chancnt = hdata->nr_channels;
@@ -1101,6 +1268,7 @@ static int dw_probe(struct platform_device *pdev)
dw->dma.device_synchronize = dw_axi_dma_synchronize;
dw->dma.device_config = dw_axi_dma_chan_slave_config;
dw->dma.device_prep_slave_sg = dw_axi_dma_chan_prep_slave_sg;
+ dw->dma.device_prep_dma_cyclic = dw_axi_dma_chan_prep_cyclic;
platform_set_drvdata(pdev, chip);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index ac49f2e14b0c..a26b0a242a93 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -45,6 +45,7 @@ struct axi_dma_chan {
struct axi_dma_desc *desc;
struct dma_slave_config config;
enum dma_transfer_direction direction;
+ bool cyclic;
/* these other elements are all protected by vc.lock */
bool is_paused;
};
@@ -93,6 +94,7 @@ struct axi_dma_desc {
struct virt_dma_desc vd;
struct axi_dma_chan *chan;
+ u32 completed_blocks;
};
static inline struct device *dchan2dev(struct dma_chan *dchan)
--
2.18.0
next prev parent reply other threads:[~2020-10-12 4:39 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-12 4:21 [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA Sia Jee Heng
2020-10-12 4:21 ` [PATCH 01/15] dt-bindings: dma: Add YAML schemas for dw-axi-dmac Sia Jee Heng
2020-10-12 4:21 ` [PATCH 02/15] dmaengine: dw-axi-dmac: simplify descriptor management Sia Jee Heng
2020-10-12 4:21 ` [PATCH 03/15] dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources() Sia Jee Heng
2020-10-12 4:21 ` [PATCH 04/15] dmaengine: dw-axi-dmac: Add device_synchronize() callback Sia Jee Heng
2020-10-12 4:21 ` [PATCH 05/15] dmaengine: dw-axi-dmac: Add device_config operation Sia Jee Heng
2020-10-12 4:21 ` [PATCH 06/15] dmaengine: dw-axi-dmac: Support device_prep_slave_sg Sia Jee Heng
2020-10-12 4:21 ` Sia Jee Heng [this message]
2020-10-12 4:21 ` [PATCH 08/15] dmaengine: dw-axi-dmac: Support of_dma_controller_register() Sia Jee Heng
2020-10-12 4:21 ` [PATCH 09/15] dmaengine: dw-axi-dmac: Support burst residue granularity Sia Jee Heng
2020-10-12 4:21 ` [PATCH 10/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support Sia Jee Heng
2020-10-12 4:21 ` [PATCH 11/15] dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA Sia Jee Heng
2020-10-12 4:21 ` [PATCH 12/15] dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields Sia Jee Heng
2020-10-12 4:21 ` [PATCH 13/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake Sia Jee Heng
2020-10-12 4:21 ` [PATCH 14/15] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers Sia Jee Heng
2020-10-12 4:22 ` [PATCH 15/15] dmaengine: dw-axi-dmac: Set constraint to the Max segment size Sia Jee Heng
2020-10-12 13:59 ` [PATCH 00/15] dmaengine: dw-axi-dmac: support Intel KeemBay AxiDMA Andy Shevchenko
2020-10-13 5:49 ` Sia, Jee Heng
2020-10-13 7:01 ` Vinod Koul
2020-10-13 7:12 ` Sia, Jee Heng
2020-10-13 7:16 ` Vinod Koul
2020-10-16 14:51 ` Eugeniy Paltsev
2020-10-19 1:22 ` Sia, Jee Heng
2020-10-19 11:39 ` andriy.shevchenko
2020-10-21 1:54 ` Sia, Jee Heng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201012042200.29787-8-jee.heng.sia@intel.com \
--to=jee.heng.sia@intel.com \
--cc=Eugeniy.Paltsev@synopsys.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).