From: Zhen Lei <thunder.leizhen@huawei.com>
To: Wei Xu <xuwei5@hisilicon.com>, Rob Herring <robh+dt@kernel.org>,
devicetree <devicetree@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Subject: [PATCH v2 02/10] ARM: dts: hisilicon: fix errors detected by pl011.yaml
Date: Mon, 12 Oct 2020 14:12:17 +0800 [thread overview]
Message-ID: <20201012061225.1597-3-thunder.leizhen@huawei.com> (raw)
In-Reply-To: <20201012061225.1597-1-thunder.leizhen@huawei.com>
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "uartclk", "apb_pclk". Both of them use the same
clock.
3. Change pinctrl-names to "default", "sleep".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm/boot/dts/hi3519.dtsi | 20 ++++++++++----------
arch/arm/boot/dts/hi3620-hi4511.dts | 20 ++++++++++----------
arch/arm/boot/dts/hi3620.dtsi | 30 +++++++++++++++---------------
arch/arm/boot/dts/hisi-x5hd2.dtsi | 30 +++++++++++++++---------------
4 files changed, 50 insertions(+), 50 deletions(-)
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
index 410409a0ed66251..630753c0d704427 100644
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -52,8 +52,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x12100000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART0_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
@@ -61,8 +61,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x12101000 0x1000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART1_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
@@ -70,8 +70,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x12102000 0x1000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART2_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
@@ -79,8 +79,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x12103000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART3_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
@@ -88,8 +88,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0x12104000 0x1000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg HI3519_UART4_CLK>;
- clock-names = "apb_pclk";
+ clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
+ clock-names = "uartclk", "apb_pclk";
status = "disable";
};
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index 8c703c3f2fe09b7..1c62bdcca647a9a 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -27,36 +27,36 @@
status = "ok";
};
- uart0: uart@b00000 { /* console */
- pinctrl-names = "default", "idle";
+ uart0: serial@b00000 { /* console */
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
status = "ok";
};
- uart1: uart@b01000 { /* modem */
- pinctrl-names = "default", "idle";
+ uart1: serial@b01000 { /* modem */
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
status = "ok";
};
- uart2: uart@b02000 { /* audience */
- pinctrl-names = "default", "idle";
+ uart2: serial@b02000 { /* audience */
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
status = "ok";
};
- uart3: uart@b03000 {
- pinctrl-names = "default", "idle";
+ uart3: serial@b03000 {
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
status = "ok";
};
- uart4: uart@b04000 {
- pinctrl-names = "default", "idle";
+ uart4: serial@b04000 {
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
status = "ok";
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index f683440ee5694b4..d41378391e4cc36 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -172,48 +172,48 @@
interrupts = <1 13 0xf01>;
};
- uart0: uart@b00000 {
+ uart0: serial@b00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb00000 0x1000>;
interrupts = <0 20 4>;
- clocks = <&clock HI3620_UARTCLK0>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart1: uart@b01000 {
+ uart1: serial@b01000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb01000 0x1000>;
interrupts = <0 21 4>;
- clocks = <&clock HI3620_UARTCLK1>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart2: uart@b02000 {
+ uart2: serial@b02000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb02000 0x1000>;
interrupts = <0 22 4>;
- clocks = <&clock HI3620_UARTCLK2>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart3: uart@b03000 {
+ uart3: serial@b03000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb03000 0x1000>;
interrupts = <0 23 4>;
- clocks = <&clock HI3620_UARTCLK3>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart4: uart@b04000 {
+ uart4: serial@b04000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb04000 0x1000>;
interrupts = <0 24 4>;
- clocks = <&clock HI3620_UARTCLK4>;
- clock-names = "apb_pclk";
+ clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index e2dbf1d8a67bae2..f645487402f6e86 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -86,48 +86,48 @@
status = "disabled";
};
- uart0: uart@b00000 {
+ uart0: serial@b00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b00000 0x1000>;
interrupts = <0 49 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart1: uart@6000 {
+ uart1: serial@6000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00006000 0x1000>;
interrupts = <0 50 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart2: uart@b02000 {
+ uart2: serial@b02000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b02000 0x1000>;
interrupts = <0 51 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart3: uart@b03000 {
+ uart3: serial@b03000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x00b03000 0x1000>;
interrupts = <0 52 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
- uart4: uart@b04000 {
+ uart4: serial@b04000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xb04000 0x1000>;
interrupts = <0 53 4>;
- clocks = <&clock HIX5HD2_FIXED_83M>;
- clock-names = "apb_pclk";
+ clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+ clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
--
1.8.3
next prev parent reply other threads:[~2020-10-12 6:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-12 6:12 [PATCH v2 00/10] clean up all Hisilicon-related errors detected by DT schema on arm32 Zhen Lei
2020-10-12 6:12 ` [PATCH v2 01/10] ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml Zhen Lei
2020-10-12 6:12 ` Zhen Lei [this message]
2020-10-12 6:12 ` [PATCH v2 03/10] ARM: dts: hisilicon: fix errors detected by usb yaml Zhen Lei
2020-10-12 6:12 ` [PATCH v2 04/10] ARM: dts: hisilicon: fix errors detected by simple-bus.yaml Zhen Lei
2020-10-12 6:12 ` [PATCH v2 05/10] ARM: dts: hisilicon: fix errors detected by root-node.yaml Zhen Lei
2020-10-12 6:12 ` [PATCH v2 06/10] ARM: dts: hisilicon: fix errors detected by synopsys-dw-mshc.yaml Zhen Lei
2020-10-12 6:12 ` [PATCH v2 07/10] ARM: dts: hisilicon: fix errors detected by spi-pl022.yaml Zhen Lei
2020-10-12 6:12 ` [PATCH v2 08/10] ARM: dts: hisilicon: fix errors detected by syscon.yaml Zhen Lei
2020-10-12 6:12 ` [PATCH v2 09/10] dt-bindings: arm: hisilicon: add missing properties into sysctrl.yaml Zhen Lei
2020-10-12 18:48 ` Rob Herring
2020-10-12 6:12 ` [PATCH v2 10/10] dt-bindings: arm: hisilicon: add missing properties into cpuctrl.yaml Zhen Lei
2020-10-12 18:48 ` Rob Herring
2020-11-24 11:59 ` [PATCH v2 00/10] clean up all Hisilicon-related errors detected by DT schema on arm32 Wei Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201012061225.1597-3-thunder.leizhen@huawei.com \
--to=thunder.leizhen@huawei.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).