[PATCH v2 4/4] dt-bindings: arm: add support for SCMI Regulators

From: Cristian Marussi <cristian.marussi@arm.com>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: sudeep.holla@arm.com, lukasz.luba@arm.com,
	james.quinlan@broadcom.com, Jonathan.Cameron@Huawei.com,
	broonie@kernel.org, robh@kernel.org, satyakim@qti.qualcomm.com,
	etienne.carriere@linaro.org, f.fainelli@gmail.com,
	vincent.guittot@linaro.org, souvik.chakravarty@arm.com,
	cristian.marussi@arm.com
Subject: [PATCH v2 4/4] dt-bindings: arm: add support for SCMI Regulators
Date: Thu, 15 Oct 2020 16:40:01 +0100	[thread overview]
Message-ID: <20201015154001.8931-5-cristian.marussi@arm.com> (raw)
In-Reply-To: <20201015154001.8931-1-cristian.marussi@arm.com>

Add devicetree bindings to support regulators based on SCMI Voltage
Domain Protocol.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
v1 --> v2
- removed any reference to negative voltages
---
 .../devicetree/bindings/arm/arm,scmi.txt      | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
index 55deb68230eb..6d3d0bdab322 100644
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
@@ -62,6 +62,28 @@ Required properties:
  - #power-domain-cells : Should be 1. Contains the device or the power
 			 domain ID value used by SCMI commands.
 
+Regulator bindings for the SCMI Regulator based on SCMI Message Protocol
+------------------------------------------------------------
+
+An SCMI Regulator is permanently bound to a well defined SCMI Voltage Domain,
+and should be always positioned as a root regulator.
+It does not support any current operation.
+
+This binding uses the common regulator binding[6].
+
+SCMI Regulators are grouped under a 'regulators' node which in turn is a child
+of the SCMI Voltage protocol node inside the desired SCMI instance node.
+
+Required properties:
+ - reg : shall identify an existent SCMI Voltage Domain.
+
+Optional properties:
+ - all of the other standard regulator bindings as in [6]: note that, since
+   the SCMI Protocol itself aims in fact to hide away many of the operational
+   capabilities usually exposed by the properties of a standard regulator,
+   most of the usual regulator bindings could have just no effect in the
+   context of this SCMI regulator.
+
 Sensor bindings for the sensors based on SCMI Message Protocol
 --------------------------------------------------------------
 SCMI provides an API to access the various sensors on the SoC.
@@ -105,6 +127,7 @@ Required sub-node properties:
 [3] Documentation/devicetree/bindings/thermal/thermal*.yaml
 [4] Documentation/devicetree/bindings/sram/sram.yaml
 [5] Documentation/devicetree/bindings/reset/reset.txt
+[6] Documentation/devicetree/bindings/regulator/regulator.yaml
 
 Example:
 
@@ -169,6 +192,25 @@ firmware {
 			reg = <0x16>;
 			#reset-cells = <1>;
 		};
+
+		scmi_voltage: protocol@17 {
+			reg = <0x17>;
+
+			regulators {
+				regulator_cpu: regulator_scmi_cpu@0 {
+					reg = <0x0>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator_gpu: regulator_scmi_gpu@9 {
+					reg = <0x9>;
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <4200000>;
+				};
+
+				...
+			};
+		};
 	};
 };
 
-- 
2.17.1

