From: Chris Packham <chris.packham@alliedtelesis.co.nz>
To: andrew@lunn.ch, vivien.didelot@gmail.com, f.fainelli@gmail.com,
olteanv@gmail.com, davem@davemloft.net, kuba@kernel.org,
linux@armlinux.org.uk
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH v3 2/3] net: dsa: mv88e6xxx: Support serdes ports on MV88E6097/6095/6185
Date: Tue, 20 Oct 2020 16:45:57 +1300 [thread overview]
Message-ID: <20201020034558.19438-3-chris.packham@alliedtelesis.co.nz> (raw)
In-Reply-To: <20201020034558.19438-1-chris.packham@alliedtelesis.co.nz>
Implement serdes_power, serdes_get_lane and serdes_pcs_get_state ops for
the MV88E6097/6095/6185 so that ports 8 & 9 can be supported as serdes
ports and directly connected to other network interfaces or to SFPs
without a PHY.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v3:
- Add comment to mv88e6185_serdes_get_lane
- Add review from Andrew
Changes in v2:
- expand support to cover 6095 and 6185
- move serdes related code to serdes.c
drivers/net/dsa/mv88e6xxx/chip.c | 9 +++++
drivers/net/dsa/mv88e6xxx/serdes.c | 62 ++++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/serdes.h | 5 +++
3 files changed, 76 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 1ef392ee52c5..62d4d7b5d9ac 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3496,6 +3496,9 @@ static const struct mv88e6xxx_ops mv88e6095_ops = {
.stats_get_strings = mv88e6095_stats_get_strings,
.stats_get_stats = mv88e6095_stats_get_stats,
.mgmt_rsvd2cpu = mv88e6185_g2_mgmt_rsvd2cpu,
+ .serdes_power = mv88e6185_serdes_power,
+ .serdes_get_lane = mv88e6185_serdes_get_lane,
+ .serdes_pcs_get_state = mv88e6185_serdes_pcs_get_state,
.ppu_enable = mv88e6185_g1_ppu_enable,
.ppu_disable = mv88e6185_g1_ppu_disable,
.reset = mv88e6185_g1_reset,
@@ -3534,6 +3537,9 @@ static const struct mv88e6xxx_ops mv88e6097_ops = {
.set_egress_port = mv88e6095_g1_set_egress_port,
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
+ .serdes_power = mv88e6185_serdes_power,
+ .serdes_get_lane = mv88e6185_serdes_get_lane,
+ .serdes_pcs_get_state = mv88e6185_serdes_pcs_get_state,
.pot_clear = mv88e6xxx_g2_pot_clear,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6085_g1_rmu_disable,
@@ -3958,6 +3964,9 @@ static const struct mv88e6xxx_ops mv88e6185_ops = {
.set_egress_port = mv88e6095_g1_set_egress_port,
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6185_g2_mgmt_rsvd2cpu,
+ .serdes_power = mv88e6185_serdes_power,
+ .serdes_get_lane = mv88e6185_serdes_get_lane,
+ .serdes_pcs_get_state = mv88e6185_serdes_pcs_get_state,
.set_cascade_port = mv88e6185_g1_set_cascade_port,
.ppu_enable = mv88e6185_g1_ppu_enable,
.ppu_disable = mv88e6185_g1_ppu_disable,
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 9c07b4f3d345..d4f40a739b17 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -428,6 +428,68 @@ u8 mv88e6341_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
return lane;
}
+int mv88e6185_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
+ bool up)
+{
+ /* The serdes power can't be controlled on this switch chip but we need
+ * to supply this function to avoid returning -EOPNOTSUPP in
+ * mv88e6xxx_serdes_power_up/mv88e6xxx_serdes_power_down
+ */
+ return 0;
+}
+
+u8 mv88e6185_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
+{
+ /* There are no configurable serdes lanes on this switch chip but we
+ * need to return non-zero so that callers of
+ * mv88e6xxx_serdes_get_lane() know this is a serdes port.
+ */
+ switch (chip->ports[port].cmode) {
+ case MV88E6185_PORT_STS_CMODE_SERDES:
+ case MV88E6185_PORT_STS_CMODE_1000BASE_X:
+ return 0xff;
+ default:
+ return 0;
+ }
+}
+
+int mv88e6185_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
+ u8 lane, struct phylink_link_state *state)
+{
+ int err;
+ u16 status;
+
+ err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &status);
+ if (err)
+ return err;
+
+ state->link = !!(status & MV88E6XXX_PORT_STS_LINK);
+
+ if (state->link) {
+ state->duplex = status & MV88E6XXX_PORT_STS_DUPLEX ? DUPLEX_FULL : DUPLEX_HALF;
+
+ switch (status & MV88E6XXX_PORT_STS_SPEED_MASK) {
+ case MV88E6XXX_PORT_STS_SPEED_1000:
+ state->speed = SPEED_1000;
+ break;
+ case MV88E6XXX_PORT_STS_SPEED_100:
+ state->speed = SPEED_100;
+ break;
+ case MV88E6XXX_PORT_STS_SPEED_10:
+ state->speed = SPEED_10;
+ break;
+ default:
+ dev_err(chip->dev, "invalid PHY speed\n");
+ return -EINVAL;
+ }
+ } else {
+ state->duplex = DUPLEX_UNKNOWN;
+ state->speed = SPEED_UNKNOWN;
+ }
+
+ return 0;
+}
+
u8 mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
{
u8 cmode = chip->ports[port].cmode;
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index 14315f26228a..c24ec4122c9e 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -73,6 +73,7 @@
#define MV88E6390_PG_CONTROL 0xf010
#define MV88E6390_PG_CONTROL_ENABLE_PC BIT(0)
+u8 mv88e6185_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
u8 mv88e6341_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
u8 mv88e6352_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
u8 mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
@@ -85,6 +86,8 @@ int mv88e6390_serdes_pcs_config(struct mv88e6xxx_chip *chip, int port,
u8 lane, unsigned int mode,
phy_interface_t interface,
const unsigned long *advertise);
+int mv88e6185_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
+ u8 lane, struct phylink_link_state *state);
int mv88e6352_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
u8 lane, struct phylink_link_state *state);
int mv88e6390_serdes_pcs_get_state(struct mv88e6xxx_chip *chip, int port,
@@ -101,6 +104,8 @@ unsigned int mv88e6352_serdes_irq_mapping(struct mv88e6xxx_chip *chip,
int port);
unsigned int mv88e6390_serdes_irq_mapping(struct mv88e6xxx_chip *chip,
int port);
+int mv88e6185_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
+ bool up);
int mv88e6352_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
bool on);
int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, u8 lane,
--
2.28.0
next prev parent reply other threads:[~2020-10-20 3:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-20 3:45 [PATCH v3 0/3] net: dsa: mv88e6xxx: serdes link without phy Chris Packham
2020-10-20 3:45 ` [PATCH v3 1/3] net: dsa: mv88e6xxx: Don't force link when using in-band-status Chris Packham
2020-10-20 10:15 ` Russell King - ARM Linux admin
2020-10-20 13:49 ` Marek Behun
2020-10-20 14:05 ` Andrew Lunn
2020-10-20 14:15 ` Russell King - ARM Linux admin
2020-10-20 14:51 ` Marek Behun
2020-10-20 14:58 ` Andrew Lunn
2020-10-20 21:04 ` Chris Packham
2020-10-20 21:15 ` Andrew Lunn
2020-10-20 21:06 ` Chris Packham
2020-10-20 21:18 ` Russell King - ARM Linux admin
2020-10-21 2:20 ` Chris Packham
2020-10-20 3:45 ` Chris Packham [this message]
2020-10-20 3:45 ` [PATCH v3 3/3] net: dsa: mv88e6xxx: Support serdes ports on MV88E6123/6131 Chris Packham
2020-10-20 10:18 ` Russell King - ARM Linux admin
2020-10-20 21:24 ` Chris Packham
2020-10-20 21:34 ` Russell King - ARM Linux admin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201020034558.19438-3-chris.packham@alliedtelesis.co.nz \
--to=chris.packham@alliedtelesis.co.nz \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).