From: Guru Das Srinagesh <gurus@codeaurora.org>
To: Mark Brown <broonie@kernel.org>,
Markus Elfring <Markus.Elfring@web.de>,
Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
Greg KH <gregkh@linuxfoundation.org>,
Guenter Roeck <linux@roeck-us.net>, Joe Perches <joe@perches.com>,
Subbaraman Narayanamurthy <subbaram@codeaurora.org>,
David Collins <collinsd@codeaurora.org>,
Anirudh Ghayal <aghayal@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Guru Das Srinagesh <gurus@codeaurora.org>
Subject: [RFC PATCH RESEND v1 2/3] dt-bindings: mfd: Add QCOM PM8008 MFD bindings
Date: Tue, 20 Oct 2020 15:33:42 -0700 [thread overview]
Message-ID: <7a89811f36fe858756daa62f1162d18da7e79a73.1603232320.git.gurus@codeaurora.org> (raw)
In-Reply-To: <cover.1603232320.git.gurus@codeaurora.org>
In-Reply-To: <cover.1603232320.git.gurus@codeaurora.org>
Add device tree bindings for the driver for Qualcomm Technology Inc.'s
PM8008 MFD PMIC.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
---
.../bindings/mfd/qcom,pm8008-irqchip.yaml | 103 +++++++++++++++++++++
1 file changed, 103 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
new file mode 100644
index 0000000..296ff85
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/qcom/qcom,pm8008-irqchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. PM8008 Multi-Function Device PMIC
+
+maintainers:
+ - Guru Das Srinagesh <gurus@codeaurora.org>
+
+description: |
+ PM8008 is a PMIC that contains 7 LDOs, 2 GPIOs, temperature monitoring, and
+ can be interfaced over I2C.
+
+properties:
+ compatible:
+ const: qcom,pm8008-irqchip
+
+ reg:
+ maxItems: 1
+
+ interrupt-names:
+ const: pm8008
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller:
+ type: boolean
+
+ "#address-cells":
+ const: 1
+ description:
+ Must be specified if child nodes are specified.
+
+ "#size-cells":
+ const: 0
+ description:
+ Must be specified if child nodes are specified.
+
+ "#interrupt-cells":
+ const: 2
+ description:
+ The first cell is the IRQ number, the second cell is the IRQ trigger flag.
+
+patternProperties:
+ "^.*[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
+ type: object
+ # Each peripheral in PM8008 must be represented as a child node with an
+ # optional label for referencing as phandle elsewhere. This is optional.
+ properties:
+ compatible:
+ description:
+ The compatible string for the peripheral's driver.
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+ - interrupts
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ &qupv3_se13_i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8008i@8 {
+ compatible = "qcom,pm8008-irqchip";
+ reg = <0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-names = "pm8008";
+ interrupt-parent = <&tlmm>;
+ interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+
+ pm8008_tz: qcom,temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x5 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+ };
+
+...
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-10-20 22:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-20 22:33 [RFC PATCH RESEND v1 0/3] Add support for Qualcomm MFD PMIC register layout Guru Das Srinagesh
2020-10-20 22:33 ` [RFC PATCH RESEND v1 1/3] regmap-irq: Add support for peripheral offsets Guru Das Srinagesh
2020-10-20 22:33 ` Guru Das Srinagesh [this message]
2020-10-21 14:50 ` [RFC PATCH RESEND v1 2/3] dt-bindings: mfd: Add QCOM PM8008 MFD bindings Rob Herring
2020-10-20 22:33 ` [RFC PATCH RESEND v1 3/3] mfd: Add PM8008 driver Guru Das Srinagesh
-- strict thread matches above, loose matches on Subject: below --
2020-10-19 23:17 [RFC PATCH RESEND v1 0/3] Add support for Qualcomm MFD PMIC register layout Guru Das Srinagesh
2020-10-19 23:17 ` [RFC PATCH RESEND v1 2/3] dt-bindings: mfd: Add QCOM PM8008 MFD bindings Guru Das Srinagesh
2020-10-20 13:05 ` Rob Herring
2020-10-20 21:47 ` Guru Das Srinagesh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7a89811f36fe858756daa62f1162d18da7e79a73.1603232320.git.gurus@codeaurora.org \
--to=gurus@codeaurora.org \
--cc=Markus.Elfring@web.de \
--cc=aghayal@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=collinsd@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=joe@perches.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=subbaram@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).