[1/3] dt-bindings: thermal: mediatek: make resets property optional
diff mbox series

Message ID 20201021164231.3029956-1-fparent@baylibre.com
State Accepted
Commit 07df39d03c34bd7baf4c26e41a5dd92ec56e9081
Headers show
Series
  • [1/3] dt-bindings: thermal: mediatek: make resets property optional
Related show

Commit Message

Fabien Parent Oct. 21, 2020, 4:42 p.m. UTC
MT8516 Thermal IP does not support reset. Make the resets property
optional in order to be able to support MT8516 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Rob Herring Oct. 26, 2020, 2:49 p.m. UTC | #1
On Wed, 21 Oct 2020 18:42:29 +0200, Fabien Parent wrote:
> MT8516 Thermal IP does not support reset. Make the resets property
> optional in order to be able to support MT8516 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  Documentation/devicetree/bindings/thermal/mediatek-thermal.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Daniel Lezcano Oct. 27, 2020, 10:19 a.m. UTC | #2
On 21/10/2020 18:42, Fabien Parent wrote:
> MT8516 Thermal IP does not support reset. Make the resets property
> optional in order to be able to support MT8516 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---

Applied, thanks

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
index 1e249c42fae0..2d20f6b0dca0 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -20,12 +20,12 @@  Required properties:
                        clocks are:
 		       "therm":	 Main clock needed for register access
 		       "auxadc": The AUXADC clock
-- resets: Reference to the reset controller controlling the thermal controller.
 - mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
 - mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
 - #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Optional properties:
+- resets: Reference to the reset controller controlling the thermal controller.
 - nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
                unspecified default values shall be used.
 - nvmem-cell-names: Should be "calibration-data"