From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: "Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Paul Kocialkowski" <paul.kocialkowski@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Hans Verkuil" <hverkuil@xs4all.nl>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
kevin.lhopital@hotmail.com,
"Kévin L'hôpital" <kevin.lhopital@bootlin.com>
Subject: [PATCH 1/3] dt-bindings: media: i2c: Add OV8865 bindings documentation
Date: Fri, 23 Oct 2020 19:54:04 +0200 [thread overview]
Message-ID: <20201023175406.504527-2-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20201023175406.504527-1-paul.kocialkowski@bootlin.com>
This introduces YAML bindings documentation for the OV8865
image sensor.
Co-developed-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
Signed-off-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
.../bindings/media/i2c/ovti,ov8865.yaml | 124 ++++++++++++++++++
1 file changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
new file mode 100644
index 000000000000..807f1a94afae
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV8865 Image Sensor Device Tree Bindings
+
+maintainers:
+ - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+ compatible:
+ const: ovti,ov8865
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: EXTCLK Clock
+
+ clock-names:
+ items:
+ - const: extclk
+
+ dvdd-supply:
+ description: Digital Domain Power Supply
+
+ avdd-supply:
+ description: Analog Domain Power Supply (internal AVDD is used if missing)
+
+ dovdd-supply:
+ description: I/O Domain Power Supply
+
+ powerdown-gpios:
+ maxItems: 1
+ description: Power Down Pin GPIO Control (active low)
+
+ reset-gpios:
+ maxItems: 1
+ description: Reset Pin GPIO Control (active low)
+
+ port:
+ type: object
+ description: Input port, connect to a MIPI CSI-2 receiver
+
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ remote-endpoint: true
+
+ bus-type:
+ const: 4
+
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - bus-type
+ - data-lanes
+ - remote-endpoint
+
+ additionalProperties: false
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - dvdd-supply
+ - dovdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov8865: camera@36 {
+ compatible = "ovti,ov8865";
+ reg = <0x36>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi_mclk_pin>;
+
+ clocks = <&ccu CLK_CSI_MCLK>;
+ clock-names = "extclk";
+
+ avdd-supply = <®_ov8865_avdd>;
+ dovdd-supply = <®_ov8865_dovdd>;
+ dvdd-supply = <®_ov8865_dvdd>;
+
+ powerdown-gpios = <&pio 4 17 GPIO_ACTIVE_LOW>; /* PE17 */
+ reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+
+ port {
+ ov8865_out_mipi_csi2: endpoint {
+ bus-type = <4>; /* MIPI CSI-2 D-PHY */
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+
+ remote-endpoint = <&mipi_csi2_in_ov8865>;
+ };
+ };
+ };
+ };
+
+...
--
2.28.0
next prev parent reply other threads:[~2020-10-23 17:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-23 17:54 [PATCH 0/3] media: i2c: OV8865 image sensor support Paul Kocialkowski
2020-10-23 17:54 ` Paul Kocialkowski [this message]
2020-10-30 16:39 ` [PATCH 1/3] dt-bindings: media: i2c: Add OV8865 bindings documentation Rob Herring
2020-11-02 23:24 ` Sakari Ailus
2020-11-04 10:26 ` Paul Kocialkowski
2020-11-05 8:19 ` Sakari Ailus
2020-11-05 15:35 ` Paul Kocialkowski
2020-11-11 13:18 ` Sakari Ailus
2020-11-13 17:27 ` Maxime Ripard
2020-11-18 22:38 ` Sakari Ailus
2020-10-23 17:54 ` [PATCH 2/3] media: i2c: Add support for the OV8865 image sensor Paul Kocialkowski
2020-10-23 17:54 ` [PATCH NOT FOR MERGE 3/3] ARM: dts: sun8i: a83t: bananapi-m3: Enable MIPI CSI-2 with OV8865 Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201023175406.504527-2-paul.kocialkowski@bootlin.com \
--to=paul.kocialkowski@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=kevin.lhopital@bootlin.com \
--cc=kevin.lhopital@hotmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).