[PATCH 05/14] media: sun6i-csi: Only configure the interface data width for parallel

From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org,
	linux-sunxi@googlegroups.com
Cc: "Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Chen-Yu Tsai" <wens@csie.org>,
	"Yong Deng" <yong.deng@magewell.com>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Helen Koike" <helen.koike@collabora.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Paul Kocialkowski" <paul.kocialkowski@bootlin.com>,
	"Hans Verkuil" <hans.verkuil@cisco.com>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Hans Verkuil" <hverkuil@xs4all.nl>,
	kevin.lhopital@hotmail.com,
	"Kévin L'hôpital" <kevin.lhopital@bootlin.com>
Subject: [PATCH 05/14] media: sun6i-csi: Only configure the interface data width for parallel
Date: Fri, 23 Oct 2020 19:45:37 +0200	[thread overview]
Message-ID: <20201023174546.504028-6-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20201023174546.504028-1-paul.kocialkowski@bootlin.com>

Bits related to the interface data width do not have any effect when
the CSI controller is taking input from the MIPI CSI-2 controller.

In prevision of adding support for this case, set these bits
conditionally so there is no ambiguity.

Co-developed-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
Signed-off-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
 .../platform/sunxi/sun6i-csi/sun6i_csi.c      | 42 +++++++++++--------
 1 file changed, 25 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index 5d2389a5cd17..a876a05ea3c7 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -378,8 +378,13 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
 	unsigned char bus_width;
 	u32 flags;
 	u32 cfg;
+	bool input_parallel = false;
 	bool input_interlaced = false;
 
+	if (endpoint->bus_type == V4L2_MBUS_PARALLEL ||
+	    endpoint->bus_type == V4L2_MBUS_BT656)
+		input_parallel = true;
+
 	if (csi->config.field == V4L2_FIELD_INTERLACED
 	    || csi->config.field == V4L2_FIELD_INTERLACED_TB
 	    || csi->config.field == V4L2_FIELD_INTERLACED_BT)
@@ -395,6 +400,26 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
 		 CSI_IF_CFG_HREF_POL_MASK | CSI_IF_CFG_FIELD_MASK |
 		 CSI_IF_CFG_SRC_TYPE_MASK);
 
+	if (input_parallel) {
+		switch (bus_width) {
+		case 8:
+			cfg |= CSI_IF_CFG_IF_DATA_WIDTH_8BIT;
+			break;
+		case 10:
+			cfg |= CSI_IF_CFG_IF_DATA_WIDTH_10BIT;
+			break;
+		case 12:
+			cfg |= CSI_IF_CFG_IF_DATA_WIDTH_12BIT;
+			break;
+		case 16: /* No need to configure DATA_WIDTH for 16bit */
+			break;
+		default:
+			dev_warn(sdev->dev, "Unsupported bus width: %u\n",
+				 bus_width);
+			break;
+		}
+	}
+
 	if (input_interlaced)
 		cfg |= CSI_IF_CFG_SRC_TYPE_INTERLACED;
 	else
@@ -440,23 +465,6 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
 		break;
 	}
 
-	switch (bus_width) {
-	case 8:
-		cfg |= CSI_IF_CFG_IF_DATA_WIDTH_8BIT;
-		break;
-	case 10:
-		cfg |= CSI_IF_CFG_IF_DATA_WIDTH_10BIT;
-		break;
-	case 12:
-		cfg |= CSI_IF_CFG_IF_DATA_WIDTH_12BIT;
-		break;
-	case 16: /* No need to configure DATA_WIDTH for 16bit */
-		break;
-	default:
-		dev_warn(sdev->dev, "Unsupported bus width: %u\n", bus_width);
-		break;
-	}
-
 	regmap_write(sdev->regmap, CSI_IF_CFG_REG, cfg);
 }
 
-- 
2.28.0

