linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
	peterx@redhat.com, Andrew Jones <drjones@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: [PATCH v15 13/14] KVM: selftests: Let dirty_log_test async for dirty ring test
Date: Fri, 23 Oct 2020 14:33:57 -0400	[thread overview]
Message-ID: <20201023183358.50607-14-peterx@redhat.com> (raw)
In-Reply-To: <20201023183358.50607-1-peterx@redhat.com>

Previously the dirty ring test was working in synchronous way, because
only with a vmexit (with that it was the ring full event) we'll know
the hardware dirty bits will be flushed to the dirty ring.

With this patch we first introduced the vcpu kick mechanism by using
SIGUSR1, meanwhile we can have a guarantee of vmexit and also the
flushing of hardware dirty bits.  With all these, we can keep the vcpu
dirty work asynchronous of the whole collection procedure now.  Still,
we need to be very careful that we can only do it async if the vcpu is
not reaching soft limit (no KVM_EXIT_DIRTY_RING_FULL).  Otherwise we
must collect the dirty bits before continuing the vcpu.

Further increase the dirty ring size to current maximum to make sure
we torture more on the no-ring-full case, which should be the major
scenario when the hypervisors like QEMU would like to use this feature.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
 tools/testing/selftests/kvm/dirty_log_test.c  | 126 +++++++++++++-----
 .../testing/selftests/kvm/include/kvm_util.h  |   1 +
 tools/testing/selftests/kvm/lib/kvm_util.c    |   9 ++
 3 files changed, 106 insertions(+), 30 deletions(-)

diff --git a/tools/testing/selftests/kvm/dirty_log_test.c b/tools/testing/selftests/kvm/dirty_log_test.c
index 9fcd15b8e999..913583cb22b8 100644
--- a/tools/testing/selftests/kvm/dirty_log_test.c
+++ b/tools/testing/selftests/kvm/dirty_log_test.c
@@ -13,6 +13,9 @@
 #include <time.h>
 #include <pthread.h>
 #include <semaphore.h>
+#include <sys/types.h>
+#include <signal.h>
+#include <errno.h>
 #include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <asm/barrier.h>
@@ -59,7 +62,9 @@
 # define test_and_clear_bit_le	test_and_clear_bit
 #endif
 
-#define TEST_DIRTY_RING_COUNT		1024
+#define TEST_DIRTY_RING_COUNT		65536
+
+#define SIG_IPI SIGUSR1
 
 /*
  * Guest/Host shared variables. Ensure addr_gva2hva() and/or
@@ -149,6 +154,12 @@ static sem_t dirty_ring_vcpu_cont;
  * verifying process, we let it pass.
  */
 static uint64_t dirty_ring_last_page;
+/*
+ * This is updated by the vcpu thread to tell the host whether it's a
+ * ring-full event.  It should only be read until a sem_wait() of
+ * dirty_ring_vcpu_stop and before vcpu continues to run.
+ */
+static bool dirty_ring_vcpu_ring_full;
 
 enum log_mode_t {
 	/* Only use KVM_GET_DIRTY_LOG for logging */
@@ -170,6 +181,33 @@ enum log_mode_t {
 static enum log_mode_t host_log_mode_option = LOG_MODE_ALL;
 /* Logging mode for current run */
 static enum log_mode_t host_log_mode;
+static pthread_t vcpu_thread;
+
+/* Only way to pass this to the signal handler */
+static struct kvm_vm *current_vm;
+
+static void vcpu_sig_handler(int sig)
+{
+	TEST_ASSERT(sig == SIG_IPI, "unknown signal: %d", sig);
+}
+
+static void vcpu_kick(void)
+{
+	pthread_kill(vcpu_thread, SIG_IPI);
+}
+
+/*
+ * In our test we do signal tricks, let's use a better version of
+ * sem_wait to avoid signal interrupts
+ */
+static void sem_wait_until(sem_t *sem)
+{
+	int ret;
+
+	do
+		ret = sem_wait(sem);
+	while (ret == -1 && errno == EINTR);
+}
 
 static bool clear_log_supported(void)
 {
@@ -203,10 +241,13 @@ static void clear_log_collect_dirty_pages(struct kvm_vm *vm, int slot,
 	kvm_vm_clear_dirty_log(vm, slot, bitmap, 0, num_pages);
 }
 
-static void default_after_vcpu_run(struct kvm_vm *vm)
+static void default_after_vcpu_run(struct kvm_vm *vm, int ret, int err)
 {
 	struct kvm_run *run = vcpu_state(vm, VCPU_ID);
 
+	TEST_ASSERT(ret == 0 || (ret == -1 && err == EINTR),
+		    "vcpu run failed: errno=%d", err);
+
 	TEST_ASSERT(get_ucall(vm, VCPU_ID, NULL) == UCALL_SYNC,
 		    "Invalid guest sync status: exit_reason=%s\n",
 		    exit_reason_str(run->exit_reason));
@@ -263,27 +304,37 @@ static uint32_t dirty_ring_collect_one(struct kvm_dirty_gfn *dirty_gfns,
 	return count;
 }
 
+static void dirty_ring_wait_vcpu(void)
+{
+	/* This makes sure that hardware PML cache flushed */
+	vcpu_kick();
+	sem_wait_until(&dirty_ring_vcpu_stop);
+}
+
+static void dirty_ring_continue_vcpu(void)
+{
+	pr_info("Notifying vcpu to continue\n");
+	sem_post(&dirty_ring_vcpu_cont);
+}
+
 static void dirty_ring_collect_dirty_pages(struct kvm_vm *vm, int slot,
 					   void *bitmap, uint32_t num_pages)
 {
 	/* We only have one vcpu */
 	static uint32_t fetch_index = 0;
 	uint32_t count = 0, cleared;
+	bool continued_vcpu = false;
 
-	/*
-	 * Before fetching the dirty pages, we need a vmexit of the
-	 * worker vcpu to make sure the hardware dirty buffers were
-	 * flushed.  This is not needed for dirty-log/clear-log tests
-	 * because get dirty log will natually do so.
-	 *
-	 * For now we do it in the simple way - we simply wait until
-	 * the vcpu uses up the soft dirty ring, then it'll always
-	 * do a vmexit to make sure that PML buffers will be flushed.
-	 * In real hypervisors, we probably need a vcpu kick or to
-	 * stop the vcpus (before the final sync) to make sure we'll
-	 * get all the existing dirty PFNs even cached in hardware.
-	 */
-	sem_wait(&dirty_ring_vcpu_stop);
+	dirty_ring_wait_vcpu();
+
+	if (!dirty_ring_vcpu_ring_full) {
+		/*
+		 * This is not a ring-full event, it's safe to allow
+		 * vcpu to continue
+		 */
+		dirty_ring_continue_vcpu();
+		continued_vcpu = true;
+	}
 
 	/* Only have one vcpu */
 	count = dirty_ring_collect_one(vcpu_map_dirty_ring(vm, VCPU_ID),
@@ -295,13 +346,16 @@ static void dirty_ring_collect_dirty_pages(struct kvm_vm *vm, int slot,
 	TEST_ASSERT(cleared == count, "Reset dirty pages (%u) mismatch "
 		    "with collected (%u)", cleared, count);
 
-	pr_info("Notifying vcpu to continue\n");
-	sem_post(&dirty_ring_vcpu_cont);
+	if (!continued_vcpu) {
+		TEST_ASSERT(dirty_ring_vcpu_ring_full,
+			    "Didn't continue vcpu even without ring full");
+		dirty_ring_continue_vcpu();
+	}
 
 	pr_info("Iteration %ld collected %u pages\n", iteration, count);
 }
 
-static void dirty_ring_after_vcpu_run(struct kvm_vm *vm)
+static void dirty_ring_after_vcpu_run(struct kvm_vm *vm, int ret, int err)
 {
 	struct kvm_run *run = vcpu_state(vm, VCPU_ID);
 
@@ -309,10 +363,16 @@ static void dirty_ring_after_vcpu_run(struct kvm_vm *vm)
 	if (get_ucall(vm, VCPU_ID, NULL) == UCALL_SYNC) {
 		/* We should allow this to continue */
 		;
-	} else if (run->exit_reason == KVM_EXIT_DIRTY_RING_FULL) {
+	} else if (run->exit_reason == KVM_EXIT_DIRTY_RING_FULL ||
+		   (ret == -1 && err == EINTR)) {
+		/* Update the flag first before pause */
+		WRITE_ONCE(dirty_ring_vcpu_ring_full,
+			   run->exit_reason == KVM_EXIT_DIRTY_RING_FULL);
 		sem_post(&dirty_ring_vcpu_stop);
-		pr_info("vcpu stops because dirty ring full...\n");
-		sem_wait(&dirty_ring_vcpu_cont);
+		pr_info("vcpu stops because %s...\n",
+			dirty_ring_vcpu_ring_full ?
+			"dirty ring is full" : "vcpu is kicked out");
+		sem_wait_until(&dirty_ring_vcpu_cont);
 		pr_info("vcpu continues now.\n");
 	} else {
 		TEST_ASSERT(false, "Invalid guest sync status: "
@@ -337,7 +397,7 @@ struct log_mode {
 	void (*collect_dirty_pages) (struct kvm_vm *vm, int slot,
 				     void *bitmap, uint32_t num_pages);
 	/* Hook to call when after each vcpu run */
-	void (*after_vcpu_run)(struct kvm_vm *vm);
+	void (*after_vcpu_run)(struct kvm_vm *vm, int ret, int err);
 	void (*before_vcpu_join) (void);
 } log_modes[LOG_MODE_NUM] = {
 	{
@@ -409,12 +469,12 @@ static void log_mode_collect_dirty_pages(struct kvm_vm *vm, int slot,
 	mode->collect_dirty_pages(vm, slot, bitmap, num_pages);
 }
 
-static void log_mode_after_vcpu_run(struct kvm_vm *vm)
+static void log_mode_after_vcpu_run(struct kvm_vm *vm, int ret, int err)
 {
 	struct log_mode *mode = &log_modes[host_log_mode];
 
 	if (mode->after_vcpu_run)
-		mode->after_vcpu_run(vm);
+		mode->after_vcpu_run(vm, ret, err);
 }
 
 static void log_mode_before_vcpu_join(void)
@@ -435,20 +495,27 @@ static void generate_random_array(uint64_t *guest_array, uint64_t size)
 
 static void *vcpu_worker(void *data)
 {
-	int ret;
+	int ret, vcpu_fd;
 	struct kvm_vm *vm = data;
 	uint64_t *guest_array;
 	uint64_t pages_count = 0;
+	struct sigaction sigact;
+
+	current_vm = vm;
+	vcpu_fd = vcpu_get_fd(vm, VCPU_ID);
+	memset(&sigact, 0, sizeof(sigact));
+	sigact.sa_handler = vcpu_sig_handler;
+	sigaction(SIG_IPI, &sigact, NULL);
 
 	guest_array = addr_gva2hva(vm, (vm_vaddr_t)random_array);
 
 	while (!READ_ONCE(host_quit)) {
+		/* Clear any existing kick signals */
 		generate_random_array(guest_array, TEST_PAGES_PER_LOOP);
 		pages_count += TEST_PAGES_PER_LOOP;
 		/* Let the guest dirty the random pages */
-		ret = _vcpu_run(vm, VCPU_ID);
-		TEST_ASSERT(ret == 0, "vcpu_run failed: %d\n", ret);
-		log_mode_after_vcpu_run(vm);
+		ret = ioctl(vcpu_fd, KVM_RUN, NULL);
+		log_mode_after_vcpu_run(vm, ret, errno);
 	}
 
 	pr_info("Dirtied %"PRIu64" pages\n", pages_count);
@@ -594,7 +661,6 @@ static struct kvm_vm *create_vm(enum vm_guest_mode mode, uint32_t vcpuid,
 static void run_test(enum vm_guest_mode mode, unsigned long iterations,
 		     unsigned long interval, uint64_t phys_offset)
 {
-	pthread_t vcpu_thread;
 	struct kvm_vm *vm;
 	unsigned long *bmap;
 
diff --git a/tools/testing/selftests/kvm/include/kvm_util.h b/tools/testing/selftests/kvm/include/kvm_util.h
index dce07d354a70..f3b5da383bb5 100644
--- a/tools/testing/selftests/kvm/include/kvm_util.h
+++ b/tools/testing/selftests/kvm/include/kvm_util.h
@@ -146,6 +146,7 @@ vm_paddr_t addr_gva2gpa(struct kvm_vm *vm, vm_vaddr_t gva);
 struct kvm_run *vcpu_state(struct kvm_vm *vm, uint32_t vcpuid);
 void vcpu_run(struct kvm_vm *vm, uint32_t vcpuid);
 int _vcpu_run(struct kvm_vm *vm, uint32_t vcpuid);
+int vcpu_get_fd(struct kvm_vm *vm, uint32_t vcpuid);
 void vcpu_run_complete_io(struct kvm_vm *vm, uint32_t vcpuid);
 void vcpu_set_guest_debug(struct kvm_vm *vm, uint32_t vcpuid,
 			  struct kvm_guest_debug *debug);
diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c
index 831f986674ca..4625e193074e 100644
--- a/tools/testing/selftests/kvm/lib/kvm_util.c
+++ b/tools/testing/selftests/kvm/lib/kvm_util.c
@@ -1220,6 +1220,15 @@ int _vcpu_run(struct kvm_vm *vm, uint32_t vcpuid)
 	return rc;
 }
 
+int vcpu_get_fd(struct kvm_vm *vm, uint32_t vcpuid)
+{
+	struct vcpu *vcpu = vcpu_find(vm, vcpuid);
+
+	TEST_ASSERT(vcpu != NULL, "vcpu not found, vcpuid: %u", vcpuid);
+
+	return vcpu->fd;
+}
+
 void vcpu_run_complete_io(struct kvm_vm *vm, uint32_t vcpuid)
 {
 	struct vcpu *vcpu = vcpu_find(vm, vcpuid);
-- 
2.26.2


  parent reply	other threads:[~2020-10-23 18:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-23 18:33 [PATCH v15 00/14] KVM: Dirty ring interface Peter Xu
2020-10-23 18:33 ` [PATCH v15 01/14] KVM: Documentation: Update entry for KVM_X86_SET_MSR_FILTER Peter Xu
2020-10-23 18:33 ` [PATCH v15 02/14] KVM: Documentation: Update entry for KVM_CAP_ENFORCE_PV_CPUID Peter Xu
2020-10-23 18:33 ` [PATCH v15 03/14] KVM: X86: Don't track dirty for KVM_SET_[TSS_ADDR|IDENTITY_MAP_ADDR] Peter Xu
2020-10-23 18:33 ` [PATCH v15 04/14] KVM: Pass in kvm pointer into mark_page_dirty_in_slot() Peter Xu
2020-10-23 18:33 ` [PATCH v15 05/14] KVM: X86: Implement ring-based dirty memory tracking Peter Xu
2020-10-23 18:33 ` [PATCH v15 06/14] KVM: Make dirty ring exclusive to dirty bitmap log Peter Xu
2020-10-23 18:33 ` [PATCH v15 07/14] KVM: Don't allocate dirty bitmap if dirty ring is enabled Peter Xu
2020-10-23 18:33 ` [PATCH v15 08/14] KVM: selftests: Always clear dirty bitmap after iteration Peter Xu
2020-10-23 18:33 ` [PATCH v15 09/14] KVM: selftests: Sync uapi/linux/kvm.h to tools/ Peter Xu
2020-10-23 18:33 ` [PATCH v15 10/14] KVM: selftests: Use a single binary for dirty/clear log test Peter Xu
2020-10-23 18:33 ` [PATCH v15 11/14] KVM: selftests: Introduce after_vcpu_run hook for dirty " Peter Xu
2020-10-23 18:33 ` [PATCH v15 12/14] KVM: selftests: Add dirty ring buffer test Peter Xu
2020-10-23 18:33 ` Peter Xu [this message]
2020-10-23 18:33 ` [PATCH v15 14/14] KVM: selftests: Add "-c" parameter to dirty log test Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201023183358.50607-14-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=drjones@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=sean.j.christopherson@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).