From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Sylwester Nawrocki <snawrocki@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCH 01/12] ARM: dts: exynos: adjust node names to DT spec in Exynos3250 boards
Date: Mon, 26 Oct 2020 19:15:17 +0100 [thread overview]
Message-ID: <20201026181528.163143-2-krzk@kernel.org> (raw)
In-Reply-To: <20201026181528.163143-1-krzk@kernel.org>
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos3250-artik5.dtsi | 2 +-
arch/arm/boot/dts/exynos3250-monk.dts | 8 ++++----
arch/arm/boot/dts/exynos3250-rinato.dts | 8 ++++----
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 12887b3924af..04290ec4583a 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -76,7 +76,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <100000>;
status = "okay";
- s2mps14_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx3>;
interrupts = <5 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index c1a68e612037..69451566945d 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -34,10 +34,10 @@ firmware@205f000 {
reg = <0x0205F000 0x1000>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power_key {
+ power-key {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 {
#address-cells = <1>;
#size-cells = <0>;
- max77836: subpmic@25 {
+ max77836: pmic@25 {
compatible = "maxim,max77836";
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_NONE>;
@@ -197,7 +197,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <100000>;
status = "okay";
- s2mps14_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index b55afaaa691e..a26e3e582a7e 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -38,10 +38,10 @@ firmware@205f000 {
reg = <0x0205F000 0x1000>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power_key {
+ power-key {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 {
#address-cells = <1>;
#size-cells = <0>;
- max77836: subpmic@25 {
+ max77836: pmic@25 {
compatible = "maxim,max77836";
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_NONE>;
@@ -267,7 +267,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <100000>;
status = "okay";
- s2mps14_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
--
2.25.1
next prev parent reply other threads:[~2020-10-26 18:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-26 18:15 [PATCH 00/12] ARM: dts: samsung: minor node name cleanups Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski [this message]
2020-10-26 18:15 ` [PATCH 02/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4210 boards Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 03/12] ARM: dts: exynos: override GPIO keys node by label in Exynos4412 Odroid family Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 04/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards Krzysztof Kozlowski
2020-10-26 21:02 ` Marek Szyprowski
2020-10-27 10:38 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 05/12] ARM: dts: exynos: remove redundant status=okay " Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 06/12] ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 07/12] ARM: dts: exynos: adjust node names to DT spec in Odroid XU Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 08/12] ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards Krzysztof Kozlowski
2020-10-26 21:47 ` Marek Szyprowski
2020-10-27 10:37 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 09/12] ARM: dts: s5pv210: adjust node names to DT spec Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 10/12] arm64: dts: exynos: adjust node names to DT spec in Exynos5433 TM2 Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 11/12] arm64: dts: exynos: adjust node names to DT spec in Exynos7 Espresso Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 12/12] arm64: dts: exynos: remove redundant status=okay in Exynos5433 TM2 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201026181528.163143-2-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=robh+dt@kernel.org \
--cc=snawrocki@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).