From: Cristian Marussi <cristian.marussi@arm.com>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: sudeep.holla@arm.com, lukasz.luba@arm.com,
james.quinlan@broadcom.com, Jonathan.Cameron@Huawei.com,
egranata@google.com, jbhayana@google.com,
peter.hilber@opensynergy.com, mikhail.golubev@opensynergy.com,
Igor.Skalkin@opensynergy.com, cristian.marussi@arm.com
Subject: [PATCH v2 6/6] firmware: arm_scmi: add SCMIv3.0 Sensor notifications
Date: Mon, 26 Oct 2020 20:10:07 +0000 [thread overview]
Message-ID: <20201026201007.23591-7-cristian.marussi@arm.com> (raw)
In-Reply-To: <20201026201007.23591-1-cristian.marussi@arm.com>
Add support for new SCMIv3.0 SENSOR_UPDATE notification.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
drivers/firmware/arm_scmi/sensors.c | 124 ++++++++++++++++++++++++----
include/linux/scmi_protocol.h | 9 ++
2 files changed, 116 insertions(+), 17 deletions(-)
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 372a3592e99b..51921e279c9f 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -24,6 +24,7 @@ enum scmi_sensor_protocol_cmd {
SENSOR_LIST_UPDATE_INTERVALS = 0x8,
SENSOR_CONFIG_GET = 0x9,
SENSOR_CONFIG_SET = 0xA,
+ SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB,
};
struct scmi_msg_resp_sensor_attributes {
@@ -133,10 +134,10 @@ struct scmi_msg_resp_sensor_list_update_intervals {
__le32 intervals[];
};
-struct scmi_msg_sensor_trip_point_notify {
+struct scmi_msg_sensor_request_notify {
__le32 id;
__le32 event_control;
-#define SENSOR_TP_NOTIFY_ALL BIT(0)
+#define SENSOR_NOTIFY_ALL BIT(0)
};
struct scmi_msg_set_sensor_trip_point {
@@ -198,6 +199,17 @@ struct scmi_sensor_trip_notify_payld {
__le32 trip_point_desc;
};
+struct scmi_msg_sensor_continuous_update_notify {
+ __le32 id;
+ __le32 event_control;
+};
+
+struct scmi_sensor_update_notify_payld {
+ __le32 agent_id;
+ __le32 sensor_id;
+ struct scmi_sensor_reading_le readings[];
+};
+
struct sensors_info {
u32 version;
int num_sensors;
@@ -563,15 +575,16 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
return ret;
}
-static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
- u32 sensor_id, bool enable)
+static inline int
+scmi_sensor_request_notify(const struct scmi_handle *handle, u32 sensor_id,
+ u8 message_id, bool enable)
{
int ret;
- u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0;
+ u32 evt_cntl = enable ? SENSOR_NOTIFY_ALL : 0;
struct scmi_xfer *t;
- struct scmi_msg_sensor_trip_point_notify *cfg;
+ struct scmi_msg_sensor_request_notify *cfg;
- ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY,
+ ret = scmi_xfer_get_init(handle, message_id,
SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t);
if (ret)
return ret;
@@ -586,6 +599,23 @@ static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
return ret;
}
+static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
+ u32 sensor_id, bool enable)
+{
+ return scmi_sensor_request_notify(handle, sensor_id,
+ SENSOR_TRIP_POINT_NOTIFY,
+ enable);
+}
+
+static int
+scmi_sensor_continuous_update_notify(const struct scmi_handle *handle,
+ u32 sensor_id, bool enable)
+{
+ return scmi_sensor_request_notify(handle, sensor_id,
+ SENSOR_CONTINUOUS_UPDATE_NOTIFY,
+ enable);
+}
+
static int
scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id,
u8 trip_id, u64 trip_value)
@@ -837,7 +867,19 @@ static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle,
{
int ret;
- ret = scmi_sensor_trip_point_notify(handle, src_id, enable);
+ switch (evt_id) {
+ case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT:
+ ret = scmi_sensor_trip_point_notify(handle, src_id, enable);
+ break;
+ case SCMI_EVENT_SENSOR_UPDATE:
+ ret = scmi_sensor_continuous_update_notify(handle, src_id,
+ enable);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
if (ret)
pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
evt_id, src_id, ret);
@@ -850,20 +892,58 @@ static void *scmi_sensor_fill_custom_report(const struct scmi_handle *handle,
const void *payld, size_t payld_sz,
void *report, u32 *src_id)
{
+ void *rep = NULL;
const struct scmi_sensor_trip_notify_payld *p = payld;
struct scmi_sensor_trip_point_report *r = report;
- if (evt_id != SCMI_EVENT_SENSOR_TRIP_POINT_EVENT ||
- sizeof(*p) != payld_sz)
- return NULL;
+ switch (evt_id) {
+ case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT:
+ {
+ if (sizeof(*p) != payld_sz)
+ break;
- r->timestamp = timestamp;
- r->agent_id = le32_to_cpu(p->agent_id);
- r->sensor_id = le32_to_cpu(p->sensor_id);
- r->trip_point_desc = le32_to_cpu(p->trip_point_desc);
- *src_id = r->sensor_id;
+ r->timestamp = timestamp;
+ r->agent_id = le32_to_cpu(p->agent_id);
+ r->sensor_id = le32_to_cpu(p->sensor_id);
+ r->trip_point_desc = le32_to_cpu(p->trip_point_desc);
+ *src_id = r->sensor_id;
+ rep = r;
+ break;
+ }
+ case SCMI_EVENT_SENSOR_UPDATE:
+ {
+ int i;
+ struct scmi_sensor_info *s;
+ const struct scmi_sensor_update_notify_payld *p = payld;
+ struct scmi_sensor_update_report *r = report;
+ struct sensors_info *sinfo = handle->sensor_priv;
+
+ /* payld_sz is variable for this event */
+ r->sensor_id = le32_to_cpu(p->sensor_id);
+ if (r->sensor_id >= sinfo->num_sensors)
+ break;
+ r->timestamp = timestamp;
+ r->agent_id = le32_to_cpu(p->agent_id);
+ s = &sinfo->sensors[r->sensor_id];
+ /*
+ * The generated report r (@struct scmi_sensor_update_report)
+ * was pre-allocated to contain up to SCMI_MAX_NUM_SENSOR_AXIS
+ * readings: here it is filled with the effective @num_axis
+ * readings defined for this sensor or 1 for scalar sensors.
+ */
+ r->readings_count = s->num_axis ?: 1;
+ for (i = 0; i < r->readings_count; i++)
+ scmi_parse_sensor_readings(&r->readings[i],
+ &p->readings[i]);
+ *src_id = r->sensor_id;
+ rep = r;
+ break;
+ }
+ default:
+ break;
+ }
- return r;
+ return rep;
}
static const struct scmi_event sensor_events[] = {
@@ -872,6 +952,16 @@ static const struct scmi_event sensor_events[] = {
.max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld),
.max_report_sz = sizeof(struct scmi_sensor_trip_point_report),
},
+ {
+ .id = SCMI_EVENT_SENSOR_UPDATE,
+ .max_payld_sz =
+ sizeof(struct scmi_sensor_update_notify_payld) +
+ SCMI_MAX_NUM_SENSOR_AXIS *
+ sizeof(struct scmi_sensor_reading_le),
+ .max_report_sz = sizeof(struct scmi_sensor_update_report) +
+ SCMI_MAX_NUM_SENSOR_AXIS *
+ sizeof(struct scmi_sensor_reading),
+ },
};
static const struct scmi_event_ops sensor_event_ops = {
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 6f39ffa638b7..f6f0199e85e4 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -654,6 +654,7 @@ enum scmi_notification_events {
SCMI_EVENT_PERFORMANCE_LIMITS_CHANGED = 0x0,
SCMI_EVENT_PERFORMANCE_LEVEL_CHANGED = 0x1,
SCMI_EVENT_SENSOR_TRIP_POINT_EVENT = 0x0,
+ SCMI_EVENT_SENSOR_UPDATE = 0x1,
SCMI_EVENT_RESET_ISSUED = 0x0,
SCMI_EVENT_BASE_ERROR_EVENT = 0x0,
SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER = 0x0,
@@ -695,6 +696,14 @@ struct scmi_sensor_trip_point_report {
unsigned int trip_point_desc;
};
+struct scmi_sensor_update_report {
+ ktime_t timestamp;
+ unsigned int agent_id;
+ unsigned int sensor_id;
+ unsigned int readings_count;
+ struct scmi_sensor_reading readings[];
+};
+
struct scmi_reset_issued_report {
ktime_t timestamp;
unsigned int agent_id;
--
2.17.1
next prev parent reply other threads:[~2020-10-26 20:10 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-26 20:10 [PATCH v2 0/6] SCMIv3.0 Sensor Extensions Cristian Marussi
2020-10-26 20:10 ` [PATCH v2 1/6] firmware: arm_scmi: rework scmi_sensors_protocol_init Cristian Marussi
2020-10-26 20:10 ` [PATCH v2 2/6] firmware: arm_scmi: add SCMIv3.0 Sensors descriptors extensions Cristian Marussi
2020-11-10 16:00 ` Mailing Lists
2020-11-10 17:21 ` Cristian Marussi
2020-11-10 17:50 ` Peter Hilber
2020-11-10 19:19 ` Cristian Marussi
2020-10-26 20:10 ` [PATCH v2 3/6] hwmon: scmi: update hwmon internal scale data type Cristian Marussi
2020-10-26 20:10 ` [PATCH v2 4/6] firmware: arm_scmi: add SCMIv3.0 Sensors timestamped reads Cristian Marussi
2020-11-10 16:01 ` Peter Hilber
2020-11-10 17:04 ` Cristian Marussi
2020-11-10 17:14 ` Peter Hilber
2020-10-26 20:10 ` [PATCH v2 5/6] firmware: arm_scmi: add SCMIv3.0 Sensor configuration support Cristian Marussi
2020-10-26 20:10 ` Cristian Marussi [this message]
2020-11-10 16:01 ` [PATCH v2 6/6] firmware: arm_scmi: add SCMIv3.0 Sensor notifications Peter Hilber
2020-11-10 17:09 ` Cristian Marussi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201026201007.23591-7-cristian.marussi@arm.com \
--to=cristian.marussi@arm.com \
--cc=Igor.Skalkin@opensynergy.com \
--cc=Jonathan.Cameron@Huawei.com \
--cc=egranata@google.com \
--cc=james.quinlan@broadcom.com \
--cc=jbhayana@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=mikhail.golubev@opensynergy.com \
--cc=peter.hilber@opensynergy.com \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).