From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Sylwester Nawrocki <snawrocki@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCH v2 06/12] ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards
Date: Tue, 27 Oct 2020 18:09:41 +0100 [thread overview]
Message-ID: <20201027170947.132725-7-krzk@kernel.org> (raw)
In-Reply-To: <20201027170947.132725-1-krzk@kernel.org>
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 6 +++---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 ++--
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 ++--
arch/arm/boot/dts/exynos5250-snow-rev5.dts | 2 +-
arch/arm/boot/dts/exynos5250-snow.dts | 2 +-
arch/arm/boot/dts/exynos5250-spring.dts | 2 +-
6 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 79546f11af26..a161f6237c7f 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -27,7 +27,7 @@ chosen {
stdout-path = "serial2:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
menu {
@@ -211,7 +211,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <20000>;
samsung,i2c-slave-addr = <0x66>;
- s5m8767_pmic@66 {
+ pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx3>;
@@ -511,7 +511,7 @@ buck9_reg: BUCK9 {
&i2c_3 {
status = "okay";
- wm1811: codec@1a {
+ wm1811: audio-codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
clocks = <&i2s0 CLK_I2S_CDCLK>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 186790f39e4d..8b5a79a8720c 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -290,7 +290,7 @@ eeprom@51 {
reg = <0x51>;
};
- wm8994: wm8994@1a {
+ wm8994: audio-codec@1a {
compatible = "wlf,wm8994";
reg = <0x1a>;
@@ -385,7 +385,7 @@ &spi_1 {
status = "okay";
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
- w25q80bw@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index c952a615148e..6635f6184051 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -217,7 +217,7 @@ panel_in: endpoint {
};
};
- mmc3_pwrseq: mmc3_pwrseq {
+ mmc3_pwrseq: mmc3-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
<&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
@@ -289,7 +289,7 @@ &i2c_0 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- max77686: max77686@9 {
+ max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index 7cbfc6f1f4b8..0822b778c035 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -32,7 +32,7 @@ codec {
};
&i2c_7 {
- max98090: codec@10 {
+ max98090: audio-codec@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupts = <4 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 75fdc5e6d423..9946dce54d74 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -30,7 +30,7 @@ codec {
};
&i2c_7 {
- max98095: codec@11 {
+ max98095: audio-codec@11 {
compatible = "maxim,max98095";
reg = <0x11>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index a92ade33779c..9d2baea62d0d 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -105,7 +105,7 @@ &i2c_0 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- s5m8767-pmic@66 {
+ pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx3>;
--
2.25.1
next prev parent reply other threads:[~2020-10-27 17:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-27 17:09 [PATCH v2 00/12] ARM: dts: samsung: minor node name cleanups Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 01/12] ARM: dts: exynos: adjust node names to DT spec in Exynos3250 boards Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 02/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4210 boards Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 03/12] ARM: dts: exynos: override GPIO keys node by label in Exynos4412 Odroid family Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 04/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 05/12] ARM: dts: exynos: remove redundant status=okay " Krzysztof Kozlowski
2020-10-27 17:09 ` Krzysztof Kozlowski [this message]
2020-10-27 17:09 ` [PATCH v2 07/12] ARM: dts: exynos: adjust node names to DT spec in Odroid XU Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 08/12] ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 09/12] ARM: dts: s5pv210: adjust node names to DT spec Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 10/12] arm64: dts: exynos: adjust node names to DT spec in Exynos5433 TM2 Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 11/12] arm64: dts: exynos: adjust node names to DT spec in Exynos7 Espresso Krzysztof Kozlowski
2020-10-27 17:09 ` [PATCH v2 12/12] arm64: dts: exynos: remove redundant status=okay in Exynos5433 TM2 Krzysztof Kozlowski
2020-10-28 21:48 ` [PATCH v2 00/12] ARM: dts: samsung: minor node name cleanups Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201027170947.132725-7-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=robh+dt@kernel.org \
--cc=snawrocki@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).