From: Asutosh Das <asutoshd@codeaurora.org>
To: cang@codeaurora.org, martin.petersen@oracle.com,
linux-scsi@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org,
Asutosh Das <asutoshd@codeaurora.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Bean Huo <beanhuo@micron.com>,
Bart Van Assche <bvanassche@acm.org>,
Satya Tangirala <satyat@google.com>,
linux-kernel@vger.kernel.org (open list),
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/Mediatek SoC support),
linux-mediatek@lists.infradead.org (moderated list:ARM/Mediatek
SoC support)
Subject: [PATCH v2 1/2] scsi: ufs: Put hba into LPM during clk gating
Date: Tue, 27 Oct 2020 12:10:36 -0700 [thread overview]
Message-ID: <52198e70bff750632740d78678a815256d697e43.1603825776.git.asutoshd@codeaurora.org> (raw)
From: Can Guo <cang@codeaurora.org>
During clock gating, after clocks are disabled,
put hba into LPM to save more power.
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
---
drivers/scsi/ufs/ufshcd.c | 9 +++++++--
drivers/scsi/ufs/ufshcd.h | 13 +++++++++++++
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 47c544d..9fc1bac 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -245,6 +245,8 @@ static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba);
static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set);
static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable);
+static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba);
+static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba);
static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag)
{
@@ -1548,6 +1550,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
}
spin_unlock_irqrestore(hba->host->host_lock, flags);
+ ufshcd_hba_vreg_set_hpm(hba);
ufshcd_setup_clocks(hba, true);
ufshcd_enable_irq(hba);
@@ -1713,6 +1716,8 @@ static void ufshcd_gate_work(struct work_struct *work)
/* If link is active, device ref_clk can't be switched off */
__ufshcd_setup_clocks(hba, false, true);
+ /* Put the host controller in low power mode if possible */
+ ufshcd_hba_vreg_set_lpm(hba);
/*
* In case you are here to cancel this work the gating state
* would be marked as REQ_CLKS_ON. In this case keep the state
@@ -8405,13 +8410,13 @@ static int ufshcd_vreg_set_hpm(struct ufs_hba *hba)
static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba)
{
- if (ufshcd_is_link_off(hba))
+ if (ufshcd_is_link_off(hba) || ufshcd_can_aggressive_pc(hba))
ufshcd_setup_hba_vreg(hba, false);
}
static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba)
{
- if (ufshcd_is_link_off(hba))
+ if (ufshcd_is_link_off(hba) || ufshcd_can_aggressive_pc(hba))
ufshcd_setup_hba_vreg(hba, true);
}
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 47eb143..0fbb735 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -592,6 +592,13 @@ enum ufshcd_caps {
* inline crypto engine, if it is present
*/
UFSHCD_CAP_CRYPTO = 1 << 8,
+
+ /*
+ * This capability allows the controller regulators to be put into
+ * lpm mode aggressively during clock gating.
+ * This would increase power savings.
+ */
+ UFSHCD_CAP_AGGR_POWER_COLLAPSE = 1 << 9,
};
struct ufs_hba_variant_params {
@@ -829,6 +836,12 @@ return true;
#endif
}
+static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba)
+{
+ return !!(ufshcd_is_link_hibern8(hba) &&
+ (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE));
+}
+
static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
{
return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) &&
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
next reply other threads:[~2020-10-27 19:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-27 19:10 Asutosh Das [this message]
2020-10-27 19:10 ` [PATCH v2 2/2] ufs: qcom: Enable aggressive power collapse for ufs hba Asutosh Das
2020-10-28 6:18 ` Avri Altman
2020-10-28 6:17 ` [PATCH v2 1/2] scsi: ufs: Put hba into LPM during clk gating Avri Altman
2020-10-30 1:57 ` Martin K. Petersen
2020-11-05 4:21 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52198e70bff750632740d78678a815256d697e43.1603825776.git.asutoshd@codeaurora.org \
--to=asutoshd@codeaurora.org \
--cc=alim.akhtar@samsung.com \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=jejb@linux.ibm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=matthias.bgg@gmail.com \
--cc=satyat@google.com \
--cc=stanley.chu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).