[PATCH v4 2/5] usb: dwc3: host: Add suspend_quirk for dwc3 host

From: Sandeep Maheswaram <sanm@codeaurora.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Felipe Balbi <balbi@kernel.org>,
	Stephen Boyd <swboyd@chromium.org>,
	Doug Anderson <dianders@chromium.org>,
	Matthias Kaehlcke <mka@chromium.org>
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Manu Gautam <mgautam@codeaurora.org>,
	Sandeep Maheswaram <sanm@codeaurora.org>
Subject: [PATCH v4 2/5] usb: dwc3: host: Add suspend_quirk for dwc3 host
Date: Wed, 28 Oct 2020 02:08:00 +0530	[thread overview]
Message-ID: <1603831083-2025-3-git-send-email-sanm@codeaurora.org> (raw)
In-Reply-To: <1603831083-2025-1-git-send-email-sanm@codeaurora.org>

Adding suspend quirk function for dwc3 host which will be called
during xhci suspend.
Setting hs_phy_mode, ss_phy_mode flags and phy mode during host suspend.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/host.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index e195176..db03db8 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,6 +11,13 @@
 #include <linux/platform_device.h>
 
 #include "core.h"
+#include "../host/xhci.h"
+#include "../host/xhci-plat.h"
+int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd);
+
+static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
+	.suspend_quirk = xhci_dwc3_suspend_quirk,
+};
 
 static int dwc3_host_get_irq(struct dwc3 *dwc)
 {
@@ -115,6 +122,13 @@ int dwc3_host_init(struct dwc3 *dwc)
 		}
 	}
 
+	ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,
+			sizeof(struct xhci_plat_priv));
+	if (ret) {
+		dev_err(dwc->dev, "failed to add data to xHCI\n");
+		goto err;
+	}
+
 	ret = platform_device_add(xhci);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register xHCI device\n");
@@ -127,6 +141,43 @@ int dwc3_host_init(struct dwc3 *dwc)
 	return ret;
 }
 
+static void dwc3_set_phy_mode(struct usb_hcd *hcd)
+{
+
+	int i, num_ports;
+	u32 reg;
+	unsigned int ss_phy_mode = 0;
+	struct device *dev = hcd->self.controller;
+	struct dwc3 *dwc = dev_get_drvdata(dev->parent);
+	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
+
+	dwc->hs_phy_mode = 0;
+
+	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
+
+	num_ports = HCS_MAX_PORTS(reg);
+	for (i = 0; i < num_ports; i++) {
+		reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04);
+		if (reg & PORT_PE) {
+			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
+			else if (DEV_LOWSPEED(reg))
+				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
+
+			if (DEV_SUPERSPEED(reg))
+				ss_phy_mode |= PHY_MODE_USB_HOST_SS;
+		}
+	}
+	phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_mode);
+	phy_set_mode(dwc->usb3_generic_phy, ss_phy_mode);
+}
+
+int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd)
+{
+	dwc3_set_phy_mode(hcd);
+	return 0;
+}
+
 void dwc3_host_exit(struct dwc3 *dwc)
 {
 	platform_device_unregister(dwc->xhci);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

