linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sandeep Maheswaram <sanm@codeaurora.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Felipe Balbi <balbi@kernel.org>,
	Stephen Boyd <swboyd@chromium.org>,
	Doug Anderson <dianders@chromium.org>,
	Matthias Kaehlcke <mka@chromium.org>
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Manu Gautam <mgautam@codeaurora.org>,
	Sandeep Maheswaram <sanm@codeaurora.org>
Subject: [PATCH v4 3/5] usb: dwc3: qcom: Configure wakeup interrupts and set genpd active wakeup flag
Date: Wed, 28 Oct 2020 02:08:01 +0530	[thread overview]
Message-ID: <1603831083-2025-4-git-send-email-sanm@codeaurora.org> (raw)
In-Reply-To: <1603831083-2025-1-git-send-email-sanm@codeaurora.org>

Configure interrupts based on hs_phy_mode to avoid triggering of
interrupts during system suspend and suspends successfully.
Set genpd active wakeup flag for usb gdsc if wakeup capable devices
are connected so that wake up happens without reenumeration.
Add helper functions to enable,disable wake irqs.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 82 ++++++++++++++++++++++++++++----------------
 1 file changed, 52 insertions(+), 30 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index c703d55..c93f7bb 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -17,9 +17,11 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_domain.h>
 #include <linux/usb/of.h>
 #include <linux/reset.h>
 #include <linux/iopoll.h>
+#include <linux/usb/hcd.h>
 
 #include "core.h"
 
@@ -291,60 +293,75 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
 	icc_put(qcom->icc_path_apps);
 }
 
-static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+static void dwc3_qcom_enable_wakeup_irq(int wake_irq)
 {
-	if (qcom->hs_phy_irq) {
-		disable_irq_wake(qcom->hs_phy_irq);
-		disable_irq_nosync(qcom->hs_phy_irq);
+	if (wake_irq) {
+		enable_irq(wake_irq);
+		enable_irq_wake(wake_irq);
 	}
+}
 
-	if (qcom->dp_hs_phy_irq) {
-		disable_irq_wake(qcom->dp_hs_phy_irq);
-		disable_irq_nosync(qcom->dp_hs_phy_irq);
+static void dwc3_qcom_disable_wakeup_irq(int wake_irq)
+{
+	if (wake_irq) {
+		disable_irq_wake(wake_irq);
+		disable_irq_nosync(wake_irq);
 	}
+}
 
-	if (qcom->dm_hs_phy_irq) {
-		disable_irq_wake(qcom->dm_hs_phy_irq);
-		disable_irq_nosync(qcom->dm_hs_phy_irq);
-	}
+static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+{
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+
+	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
 
-	if (qcom->ss_phy_irq) {
-		disable_irq_wake(qcom->ss_phy_irq);
-		disable_irq_nosync(qcom->ss_phy_irq);
+	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS)
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+	else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS)
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	else {
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
 	}
+
+	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
 }
 
 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 {
-	if (qcom->hs_phy_irq) {
-		enable_irq(qcom->hs_phy_irq);
-		enable_irq_wake(qcom->hs_phy_irq);
-	}
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 
-	if (qcom->dp_hs_phy_irq) {
-		enable_irq(qcom->dp_hs_phy_irq);
-		enable_irq_wake(qcom->dp_hs_phy_irq);
-	}
+	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq);
 
-	if (qcom->dm_hs_phy_irq) {
-		enable_irq(qcom->dm_hs_phy_irq);
-		enable_irq_wake(qcom->dm_hs_phy_irq);
+	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS)
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+	else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS)
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
+	else {
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
 	}
 
-	if (qcom->ss_phy_irq) {
-		enable_irq(qcom->ss_phy_irq);
-		enable_irq_wake(qcom->ss_phy_irq);
-	}
+	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq);
 }
 
 static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
 {
 	u32 val;
 	int i, ret;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct usb_hcd  *hcd;
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
 
 	if (qcom->is_suspended)
 		return 0;
 
+	if (dwc->xhci) {
+		hcd = platform_get_drvdata(dwc->xhci);
+		if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
+			genpd->flags |= GENPD_FLAG_ACTIVE_WAKEUP;
+	}
+
 	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
 	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
 		dev_err(qcom->dev, "HS-PHY not in L2\n");
@@ -366,10 +383,15 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
 {
 	int ret;
 	int i;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
 
 	if (!qcom->is_suspended)
 		return 0;
 
+	if (dwc->xhci)
+		genpd->flags &= ~GENPD_FLAG_ACTIVE_WAKEUP;
+
 	dwc3_qcom_disable_interrupts(qcom);
 
 	for (i = 0; i < qcom->num_clocks; i++) {
@@ -764,7 +786,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	if (ret)
 		goto interconnect_exit;
 
-	device_init_wakeup(&pdev->dev, 1);
+	device_init_wakeup(&pdev->dev, of_property_read_bool(np, "wakeup-source"));
 	qcom->is_suspended = false;
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply	other threads:[~2020-10-27 20:39 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-27 20:37 [PATCH v4 0/5] USB DWC3 host wake up support from system suspend Sandeep Maheswaram
2020-10-27 20:37 ` [PATCH v4 1/5] usb: dwc3: core: Host " Sandeep Maheswaram
2020-11-28  2:31   ` mgautam
2020-12-11  0:04     ` Matthias Kaehlcke
2020-10-27 20:38 ` [PATCH v4 2/5] usb: dwc3: host: Add suspend_quirk for dwc3 host Sandeep Maheswaram
2020-12-11  0:25   ` Matthias Kaehlcke
2020-10-27 20:38 ` Sandeep Maheswaram [this message]
2020-12-11  0:47   ` [PATCH v4 3/5] usb: dwc3: qcom: Configure wakeup interrupts and set genpd active wakeup flag Matthias Kaehlcke
2020-10-27 20:38 ` [PATCH v4 4/5] arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC interrupts Sandeep Maheswaram
2021-02-25 18:15   ` Doug Anderson
2020-10-27 20:38 ` [PATCH v4 5/5] arm64: dts: qcom: sc7180: Add wakeup-source property for USB node in IDP and trogdor Sandeep Maheswaram

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1603831083-2025-4-git-send-email-sanm@codeaurora.org \
    --to=sanm@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=balbi@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mgautam@codeaurora.org \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).