From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 08/11] KVM: VMX: Explicitly check for hv_remote_flush_tlb when loading pgd
Date: Tue, 27 Oct 2020 14:23:43 -0700 [thread overview]
Message-ID: <20201027212346.23409-9-sean.j.christopherson@intel.com> (raw)
In-Reply-To: <20201027212346.23409-1-sean.j.christopherson@intel.com>
Explicitly check that kvm_x86_ops.tlb_remote_flush() points at Hyper-V's
implementation for PV flushing instead of assuming that a non-NULL
implementation means running on Hyper-V. Wrap the related logic in
ifdeffery as hv_remote_flush_tlb() is defined iff CONFIG_HYPERV!=n.
Short term, the explicit check makes it more obvious why a non-NULL
tlb_remote_flush() triggers EPTP shenanigans. Long term, this will
allow TDX to define its own implementation of tlb_remote_flush() without
running afoul of Hyper-V.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
arch/x86/kvm/vmx/vmx.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 4d9bc0d3a929..b684f45d6a78 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -576,6 +576,21 @@ static int hv_enable_direct_tlbflush(struct kvm_vcpu *vcpu)
#endif /* IS_ENABLED(CONFIG_HYPERV) */
+static void hv_load_mmu_eptp(struct kvm_vcpu *vcpu, u64 eptp)
+{
+#if IS_ENABLED(CONFIG_HYPERV)
+ struct kvm_vmx *kvm_vmx = to_kvm_vmx(vcpu->kvm);
+
+ if (kvm_x86_ops.tlb_remote_flush == hv_remote_flush_tlb) {
+ spin_lock(&kvm_vmx->ept_pointer_lock);
+ to_vmx(vcpu)->ept_pointer = eptp;
+ if (eptp != kvm_vmx->hv_tlb_eptp)
+ kvm_vmx->hv_tlb_eptp = INVALID_PAGE;
+ spin_unlock(&kvm_vmx->ept_pointer_lock);
+ }
+#endif
+}
+
/*
* Comment's format: document - errata name - stepping - processor name.
* Refer from
@@ -3069,13 +3084,7 @@ static void vmx_load_mmu_pgd(struct kvm_vcpu *vcpu, hpa_t root_hpa,
eptp = construct_eptp(vcpu, root_hpa, root_level);
vmcs_write64(EPT_POINTER, eptp);
- if (kvm_x86_ops.tlb_remote_flush) {
- spin_lock(&to_kvm_vmx(kvm)->ept_pointer_lock);
- to_vmx(vcpu)->ept_pointer = eptp;
- if (eptp != to_kvm_vmx(kvm)->hv_tlb_eptp)
- to_kvm_vmx(kvm)->hv_tlb_eptp = INVALID_PAGE;
- spin_unlock(&to_kvm_vmx(kvm)->ept_pointer_lock);
- }
+ hv_load_mmu_eptp(vcpu, eptp);
if (!enable_unrestricted_guest && !is_paging(vcpu))
guest_cr3 = to_kvm_vmx(kvm)->ept_identity_map_addr;
--
2.28.0
next prev parent reply other threads:[~2020-10-27 21:25 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-27 21:23 [PATCH v3 00/11] KVM: VMX: Clean up Hyper-V PV TLB flush Sean Christopherson
2020-10-27 21:23 ` [PATCH v3 01/11] KVM: x86: Get active PCID only when writing a CR3 value Sean Christopherson
2020-11-12 10:11 ` Vitaly Kuznetsov
2021-01-27 17:30 ` Paolo Bonzini
2020-10-27 21:23 ` [PATCH v3 02/11] KVM: VMX: Track common EPTP for Hyper-V's paravirt TLB flush Sean Christopherson
2020-11-12 10:27 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 03/11] KVM: VMX: Stash kvm_vmx in a local variable for Hyper-V " Sean Christopherson
2020-10-27 21:23 ` [PATCH v3 04/11] KVM: VMX: Fold Hyper-V EPTP checking into it's only caller Sean Christopherson
2020-11-12 10:41 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 05/11] KVM: VMX: Do Hyper-V TLB flush iff vCPU's EPTP hasn't been flushed Sean Christopherson
2020-11-12 10:47 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 06/11] KVM: VMX: Invalidate hv_tlb_eptp to denote an EPTP mismatch Sean Christopherson
2020-11-12 10:50 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 07/11] KVM: VMX: Don't invalidate hv_tlb_eptp if the new EPTP matches Sean Christopherson
2020-10-27 21:23 ` Sean Christopherson [this message]
2020-10-27 21:23 ` [PATCH v3 09/11] KVM: VMX: Define Hyper-V paravirt TLB flush fields iff Hyper-V is enabled Sean Christopherson
2020-11-12 10:52 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 10/11] KVM: VMX: Skip additional Hyper-V TLB EPTP flushes if one fails Sean Christopherson
2020-11-12 10:59 ` Vitaly Kuznetsov
2020-10-27 21:23 ` [PATCH v3 11/11] KVM: VMX: Track root HPA instead of EPTP for paravirt Hyper-V TLB flush Sean Christopherson
2020-11-12 11:02 ` Vitaly Kuznetsov
2021-01-27 18:10 ` [PATCH v3 00/11] KVM: VMX: Clean up Hyper-V PV " Paolo Bonzini
2021-03-02 18:56 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201027212346.23409-9-sean.j.christopherson@intel.com \
--to=sean.j.christopherson@intel.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).