[5/5] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC
diff mbox series

Message ID 20201029022000.601913-6-matteo.scordino@gmail.com
State New, archived
Headers show
Series
  • Elimo Impetus and Initium support
Related show

Commit Message

Matteo Scordino Oct. 29, 2020, 2:20 a.m. UTC
The Elimo Engineering Initium is an Open Source Hardware Single Board
Computer based on the Elimo Impetus SoM.

It is meant as the first development platform for the Impetus, providing
convenient access to the peripherals on the Impetus.

It provides:
USB-C power input
UART-to-USB bridge on the USB-C connector, connected to UART1
USB-A connector for USB2.0 (Host, Device, OTG)
Audio Line In/Out
Pin header to access all signals on the M2 connector of the SoM

Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
---
 arch/arm/boot/dts/Makefile                   |  1 +
 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 27 ++++++++++++++++++++
 2 files changed, 28 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts

Comments

Paul Kocialkowski Oct. 29, 2020, 10:10 a.m. UTC | #1
Hi,

On Thu 29 Oct 20, 02:20, Matteo Scordino wrote:
> The Elimo Engineering Initium is an Open Source Hardware Single Board
> Computer based on the Elimo Impetus SoM.
> 
> It is meant as the first development platform for the Impetus, providing
> convenient access to the peripherals on the Impetus.
> 
> It provides:
> USB-C power input
> UART-to-USB bridge on the USB-C connector, connected to UART1
> USB-A connector for USB2.0 (Host, Device, OTG)
> Audio Line In/Out
> Pin header to access all signals on the M2 connector of the SoM
> 
> Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
> ---
>  arch/arm/boot/dts/Makefile                   |  1 +
>  arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 27 ++++++++++++++++++++
>  2 files changed, 28 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4f0adfead547..dcfb8d39c267 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1210,6 +1210,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
>  	sun8i-r40-bananapi-m2-ultra.dtb \
>  	sun8i-s3-lichee-zero-plus.dtb \
>  	sun8i-s3-pinecube.dtb \
> +	sun8i-s3-elimo-initium.dtb \
>  	sun8i-t3-cqa3t-bv3.dtb \
>  	sun8i-v3s-licheepi-zero.dtb \
>  	sun8i-v3s-licheepi-zero-dock.dtb \
> diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> new file mode 100644
> index 000000000000..5ddd4dbd636c
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> @@ -0,0 +1,27 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
> + */
> +
> +/dts-v1/;
> +#include "sun8i-s3-elimo-impetus.dtsi"
> +
> +/ {
> +	model = "Elimo Initium";
> +	compatible = "elimo,initium", "elimo,impetus", "allwinner,sun8i-s3";

Same comment as before about having an extra "allwinner,sun8i-v3" here.

Cheers,

Paul

> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&emac {
> +	phy-handle = <&int_mii_phy>;
> +	phy-mode = "mii";
> +	status = "okay";
> +};
> -- 
> 2.20.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Matteo Scordino Oct. 30, 2020, 12:26 a.m. UTC | #2
On Thu, 2020-10-29 at 11:10 +0100, Paul Kocialkowski wrote:
> Hi,
> 
> On Thu 29 Oct 20, 02:20, Matteo Scordino wrote:
> > The Elimo Engineering Initium is an Open Source Hardware Single Board
> > Computer based on the Elimo Impetus SoM.
> > 
> > It is meant as the first development platform for the Impetus, providing
> > convenient access to the peripherals on the Impetus.
> > 
> > It provides:
> > USB-C power input
> > UART-to-USB bridge on the USB-C connector, connected to UART1
> > USB-A connector for USB2.0 (Host, Device, OTG)
> > Audio Line In/Out
> > Pin header to access all signals on the M2 connector of the SoM
> > 
> > Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
> > ---
> >  arch/arm/boot/dts/Makefile                   |  1 +
> >  arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 27 ++++++++++++++++++++
> >  2 files changed, 28 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> > 
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 4f0adfead547..dcfb8d39c267 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1210,6 +1210,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> >  	sun8i-r40-bananapi-m2-ultra.dtb \
> >  	sun8i-s3-lichee-zero-plus.dtb \
> >  	sun8i-s3-pinecube.dtb \
> > +	sun8i-s3-elimo-initium.dtb \
> >  	sun8i-t3-cqa3t-bv3.dtb \
> >  	sun8i-v3s-licheepi-zero.dtb \
> >  	sun8i-v3s-licheepi-zero-dock.dtb \
> > diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> > new file mode 100644
> > index 000000000000..5ddd4dbd636c
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
> > @@ -0,0 +1,27 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
> > + */
> > +
> > +/dts-v1/;
> > +#include "sun8i-s3-elimo-impetus.dtsi"
> > +
> > +/ {
> > +	model = "Elimo Initium";
> > +	compatible = "elimo,initium", "elimo,impetus", "allwinner,sun8i-s3";
> 
> Same comment as before about having an extra "allwinner,sun8i-v3" here.
> 
> Cheers,
> 
> Paul

As above, I will apply and resubmit

> 
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +		serial1 = &uart1;
> > +	};
> > +
> > +	chosen {
> > +		stdout-path = "serial0:115200n8";
> > +	};
> > +};
> > +
> > +&emac {
> > +	phy-handle = <&int_mii_phy>;
> > +	phy-mode = "mii";
> > +	status = "okay";
> > +};
> > -- 
> > 2.20.1
> > 
> > 
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4f0adfead547..dcfb8d39c267 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1210,6 +1210,7 @@  dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-r40-bananapi-m2-ultra.dtb \
 	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-s3-pinecube.dtb \
+	sun8i-s3-elimo-initium.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
 	sun8i-v3s-licheepi-zero-dock.dtb \
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
new file mode 100644
index 000000000000..5ddd4dbd636c
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,27 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+	model = "Elimo Initium";
+	compatible = "elimo,initium", "elimo,impetus", "allwinner,sun8i-s3";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};