[v5,09/21] perf arm-spe: Refactor address packet handling
diff mbox series

Message ID 20201029071927.9308-10-leo.yan@linaro.org
State New
Headers show
Series
  • perf arm-spe: Refactor decoding & dumping flow
Related show

Commit Message

Leo Yan Oct. 29, 2020, 7:19 a.m. UTC
This patch is to refactor address packet handling, it defines macros for
address packet's header and payload, these macros are used by decoder
and the dump flow.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
---
 .../util/arm-spe-decoder/arm-spe-decoder.c    | 29 ++++++++-------
 .../arm-spe-decoder/arm-spe-pkt-decoder.c     | 26 +++++++-------
 .../arm-spe-decoder/arm-spe-pkt-decoder.h     | 35 ++++++++++++-------
 3 files changed, 48 insertions(+), 42 deletions(-)

Patch
diff mbox series

diff --git a/tools/perf/util/arm-spe-decoder/arm-spe-decoder.c b/tools/perf/util/arm-spe-decoder/arm-spe-decoder.c
index cc18a1e8c212..776b3e6628bb 100644
--- a/tools/perf/util/arm-spe-decoder/arm-spe-decoder.c
+++ b/tools/perf/util/arm-spe-decoder/arm-spe-decoder.c
@@ -24,36 +24,35 @@ 
 
 static u64 arm_spe_calc_ip(int index, u64 payload)
 {
-	u8 *addr = (u8 *)&payload;
-	int ns, el;
+	u64 ns, el;
 
 	/* Instruction virtual address or Branch target address */
 	if (index == SPE_ADDR_PKT_HDR_INDEX_INS ||
 	    index == SPE_ADDR_PKT_HDR_INDEX_BRANCH) {
-		ns = addr[7] & SPE_ADDR_PKT_NS;
-		el = (addr[7] & SPE_ADDR_PKT_EL_MASK) >> SPE_ADDR_PKT_EL_OFFSET;
+		ns = SPE_ADDR_PKT_GET_NS(payload);
+		el = SPE_ADDR_PKT_GET_EL(payload);
+
+		/* Clean highest byte */
+		payload = SPE_ADDR_PKT_ADDR_GET_BYTES_0_6(payload);
 
 		/* Fill highest byte for EL1 or EL2 (VHE) mode */
 		if (ns && (el == SPE_ADDR_PKT_EL1 || el == SPE_ADDR_PKT_EL2))
-			addr[7] = 0xff;
-		/* Clean highest byte for other cases */
-		else
-			addr[7] = 0x0;
+			payload |= 0xffULL << SPE_ADDR_PKT_ADDR_BYTE7_SHIFT;
 
 	/* Data access virtual address */
 	} else if (index == SPE_ADDR_PKT_HDR_INDEX_DATA_VIRT) {
 
+		/* Clean tags */
+		payload = SPE_ADDR_PKT_ADDR_GET_BYTES_0_6(payload);
+
 		/* Fill highest byte if bits [48..55] is 0xff */
-		if (addr[6] == 0xff)
-			addr[7] = 0xff;
-		/* Otherwise, cleanup tags */
-		else
-			addr[7] = 0x0;
+		if (SPE_ADDR_PKT_ADDR_GET_BYTE_6(payload) == 0xffULL)
+			payload |= 0xffULL << SPE_ADDR_PKT_ADDR_BYTE7_SHIFT;
 
 	/* Data access physical address */
 	} else if (index == SPE_ADDR_PKT_HDR_INDEX_DATA_PHYS) {
-		/* Cleanup byte 7 */
-		addr[7] = 0x0;
+		/* Clean highest byte */
+		payload = SPE_ADDR_PKT_ADDR_GET_BYTES_0_6(payload);
 	} else {
 		pr_err("unsupported address packet index: 0x%x\n", index);
 	}
diff --git a/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.c b/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.c
index 9db26e30d028..0d4b86fb8fc0 100644
--- a/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.c
+++ b/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.c
@@ -13,9 +13,6 @@ 
 
 #include "arm-spe-pkt-decoder.h"
 
-#define NS_FLAG		BIT(63)
-#define EL_FLAG		(BIT(62) | BIT(61))
-
 #if __BYTE_ORDER == __BIG_ENDIAN
 #define le16_to_cpu bswap_16
 #define le32_to_cpu bswap_32
@@ -167,10 +164,11 @@  static int arm_spe_get_addr(const unsigned char *buf, size_t len,
 			    const unsigned char ext_hdr, struct arm_spe_pkt *packet)
 {
 	packet->type = ARM_SPE_ADDRESS;
+
 	if (ext_hdr)
-		packet->index = ((buf[0] & 0x3) << 3) | (buf[1] & 0x7);
+		packet->index = SPE_HDR_EXTENDED_INDEX(buf[0], buf[1]);
 	else
-		packet->index = buf[0] & 0x7;
+		packet->index = SPE_HDR_SHORT_INDEX(buf[0]);
 
 	return arm_spe_get_payload(buf, len, ext_hdr, packet);
 }
@@ -278,20 +276,20 @@  static int arm_spe_pkt_desc_addr(const struct arm_spe_pkt *packet,
 	int err = 0;
 
 	switch (idx) {
-	case 0:
-	case 1:
-		ns = !!(packet->payload & NS_FLAG);
-		el = (packet->payload & EL_FLAG) >> 61;
-		payload &= ~(0xffULL << 56);
+	case SPE_ADDR_PKT_HDR_INDEX_INS:
+	case SPE_ADDR_PKT_HDR_INDEX_BRANCH:
+		ns = !!SPE_ADDR_PKT_GET_NS(payload);
+		el = SPE_ADDR_PKT_GET_EL(payload);
+		payload = SPE_ADDR_PKT_ADDR_GET_BYTES_0_6(payload);
 		return arm_spe_pkt_snprintf(&err, &buf, &buf_len,
 				"%s 0x%llx el%d ns=%d",
 				(idx == 1) ? "TGT" : "PC", payload, el, ns);
-	case 2:
+	case SPE_ADDR_PKT_HDR_INDEX_DATA_VIRT:
 		return arm_spe_pkt_snprintf(&err, &buf, &buf_len,
 					    "VA 0x%llx", payload);
-	case 3:
-		ns = !!(packet->payload & NS_FLAG);
-		payload &= ~(0xffULL << 56);
+	case SPE_ADDR_PKT_HDR_INDEX_DATA_PHYS:
+		ns = !!SPE_ADDR_PKT_GET_NS(payload);
+		payload = SPE_ADDR_PKT_ADDR_GET_BYTES_0_6(payload);
 		return arm_spe_pkt_snprintf(&err, &buf, &buf_len,
 					    "PA 0x%llx ns=%d", payload, ns);
 	default:
diff --git a/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.h b/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.h
index 129f43405eb1..f97d6840be3a 100644
--- a/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.h
+++ b/tools/perf/util/arm-spe-decoder/arm-spe-pkt-decoder.h
@@ -56,19 +56,28 @@  struct arm_spe_pkt {
 #define SPE_HEADER0_COUNTER			0x98
 #define SPE_HEADER1_ALIGNMENT			0x0
 
-#define SPE_ADDR_PKT_HDR_INDEX_INS		(0x0)
-#define SPE_ADDR_PKT_HDR_INDEX_BRANCH		(0x1)
-#define SPE_ADDR_PKT_HDR_INDEX_DATA_VIRT	(0x2)
-#define SPE_ADDR_PKT_HDR_INDEX_DATA_PHYS	(0x3)
-
-#define SPE_ADDR_PKT_NS				BIT(7)
-#define SPE_ADDR_PKT_CH				BIT(6)
-#define SPE_ADDR_PKT_EL_OFFSET			(5)
-#define SPE_ADDR_PKT_EL_MASK			(0x3 << SPE_ADDR_PKT_EL_OFFSET)
-#define SPE_ADDR_PKT_EL0			(0)
-#define SPE_ADDR_PKT_EL1			(1)
-#define SPE_ADDR_PKT_EL2			(2)
-#define SPE_ADDR_PKT_EL3			(3)
+#define SPE_HDR_SHORT_INDEX(h)			((h) & GENMASK_ULL(2, 0))
+#define SPE_HDR_EXTENDED_INDEX(h0, h1)		(((h0) & GENMASK_ULL(1, 0)) << 3 | \
+						 SPE_HDR_SHORT_INDEX(h1))
+
+/* Address packet header */
+#define SPE_ADDR_PKT_HDR_INDEX_INS		0x0
+#define SPE_ADDR_PKT_HDR_INDEX_BRANCH		0x1
+#define SPE_ADDR_PKT_HDR_INDEX_DATA_VIRT	0x2
+#define SPE_ADDR_PKT_HDR_INDEX_DATA_PHYS	0x3
+
+/* Address packet payload */
+#define SPE_ADDR_PKT_ADDR_BYTE7_SHIFT		56
+#define SPE_ADDR_PKT_ADDR_GET_BYTES_0_6(v)	((v) & GENMASK_ULL(55, 0))
+#define SPE_ADDR_PKT_ADDR_GET_BYTE_6(v)		(((v) & GENMASK_ULL(55, 48)) >> 48)
+
+#define SPE_ADDR_PKT_GET_NS(v)			(((v) & BIT_ULL(63)) >> 63)
+#define SPE_ADDR_PKT_GET_EL(v)			(((v) & GENMASK_ULL(62, 61)) >> 61)
+
+#define SPE_ADDR_PKT_EL0			0
+#define SPE_ADDR_PKT_EL1			1
+#define SPE_ADDR_PKT_EL2			2
+#define SPE_ADDR_PKT_EL3			3
 
 const char *arm_spe_pkt_name(enum arm_spe_pkt_type);