[2/2] regulator: Add support for DA9121 regulator
diff mbox series

Message ID 20201029151538.23463-3-vincent.whitchurch@axis.com
State New
Headers show
Series
  • DA9121 regulator support
Related show

Commit Message

Vincent Whitchurch Oct. 29, 2020, 3:15 p.m. UTC
Add support for the Dialog Semiconductor DA9121, a single-channel
dual-phase buck converter controlled via I2C.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
---
 drivers/regulator/Kconfig            |  12 +++
 drivers/regulator/Makefile           |   1 +
 drivers/regulator/da9121-regulator.c | 111 +++++++++++++++++++++++++++
 3 files changed, 124 insertions(+)
 create mode 100644 drivers/regulator/da9121-regulator.c

Comments

Mark Brown Oct. 29, 2020, 3:28 p.m. UTC | #1
On Thu, Oct 29, 2020 at 04:15:38PM +0100, Vincent Whitchurch wrote:

> +	config.init_data = of_get_regulator_init_data(dev, dev->of_node, &da9121_reg);
> +	if (!config.init_data)
> +		return -ENOMEM;

Don't do this, the core can do the DT bit for you and there is no reason
not to register the device if there are no constraints.  -ENOMEM would
also be the wrong error code here.
Vincent Whitchurch Nov. 2, 2020, 3:48 p.m. UTC | #2
On Thu, Oct 29, 2020 at 03:28:43PM +0000, Mark Brown wrote:
> On Thu, Oct 29, 2020 at 04:15:38PM +0100, Vincent Whitchurch wrote:
> 
> > +	config.init_data = of_get_regulator_init_data(dev, dev->of_node, &da9121_reg);
> > +	if (!config.init_data)
> > +		return -ENOMEM;
> 
> Don't do this, the core can do the DT bit for you and there is no reason
> not to register the device if there are no constraints.  -ENOMEM would
> also be the wrong error code here.

OK, thanks.  I see that I can get the core to do it if I set ->of_match
on the regulator_desc.  I also see that there is some flexibility about
the placement of the constraints (desc->regulators_node is optional).

This chip has only one output which the datasheet calls Buck1, so I will
remove this call and set the desc.of_match field to get the driver to
support a node which looks like this:

      regulator@68 {
        compatible = "dlg,da9121";
        reg = <0x68>;

        buck1 {
            regulator-min-microvolt = <675000>;
            regulator-max-microvolt = <825000>;
        };
      };

Patch
diff mbox series

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 020a00d6696b..005a6036dd38 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -303,6 +303,18 @@  config REGULATOR_DA9063
 	  This driver can also be built as a module. If so, the module
 	  will be called da9063-regulator.
 
+config REGULATOR_DA9121
+	tristate "Dialog Semiconductor DA9121 regulator"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support for the Dialog Semiconductor DA9121.  The
+	  DA9210 is a dual-phase buck converter controlled through an I2C
+	  interface.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9121-regulator.
+
 config REGULATOR_DA9210
 	tristate "Dialog Semiconductor DA9210 regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 6ebae516258e..6096862a1d60 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -38,6 +38,7 @@  obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_DA9055)	+= da9055-regulator.o
 obj-$(CONFIG_REGULATOR_DA9062)	+= da9062-regulator.o
 obj-$(CONFIG_REGULATOR_DA9063)	+= da9063-regulator.o
+obj-$(CONFIG_REGULATOR_DA9121) += da9121-regulator.o
 obj-$(CONFIG_REGULATOR_DA9210) += da9210-regulator.o
 obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o
 obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c
new file mode 100644
index 000000000000..d712e8f07c41
--- /dev/null
+++ b/drivers/regulator/da9121-regulator.c
@@ -0,0 +1,111 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2020 Axis Communications AB */
+
+#include <linux/of_device.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/driver.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+
+#define DA9121_BUCK_BUCK1_0			0x20
+#define DA9121_BUCK_BUCK1_0_CH1_EN		BIT(0)
+
+#define DA9121_BUCK_BUCK1_5			0x25
+#define DA9121_BUCK_BUCK1_5_CH1_A_VOUT		GENMASK(7, 0)
+
+#define DA9121_MIN_MV		300
+#define DA9121_MAX_MV		1900
+#define DA9121_STEP_MV		10
+#define DA9121_MIN_SEL		(DA9121_MIN_MV / DA9121_STEP_MV)
+#define DA9121_N_VOLTAGES	(((DA9121_MAX_MV - DA9121_MIN_MV) / DA9121_STEP_MV) \
+				 + 1 + DA9121_MIN_SEL)
+
+static const struct regmap_config da9121_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct regulator_ops da9121_buck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+static const struct regulator_desc da9121_reg = {
+	.name = "da9121",
+	.owner = THIS_MODULE,
+	.ops = &da9121_buck_ops,
+	.type = REGULATOR_VOLTAGE,
+	.n_voltages = DA9121_N_VOLTAGES,
+	.min_uV = DA9121_MIN_MV * 1000,
+	.uV_step = DA9121_STEP_MV * 1000,
+	.linear_min_sel = DA9121_MIN_SEL,
+	.vsel_reg = DA9121_BUCK_BUCK1_5,
+	.vsel_mask = DA9121_BUCK_BUCK1_5_CH1_A_VOUT,
+	.enable_reg = DA9121_BUCK_BUCK1_0,
+	.enable_mask = DA9121_BUCK_BUCK1_0_CH1_EN,
+	/* Default value of BUCK_BUCK1_0.CH1_SRC_DVC_UP */
+	.ramp_delay = 20000,
+	/* tBUCK_EN */
+	.enable_time = 20,
+};
+
+static const struct of_device_id da9121_dt_ids[] = {
+	{ .compatible = "dlg,da9121", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9121_dt_ids);
+
+static int da9121_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c->dev;
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(i2c, &da9121_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	config.dev = &i2c->dev;
+	config.of_node = dev->of_node;
+	config.regmap = regmap;
+
+	config.init_data = of_get_regulator_init_data(dev, dev->of_node, &da9121_reg);
+	if (!config.init_data)
+		return -ENOMEM;
+
+	rdev = devm_regulator_register(&i2c->dev, &da9121_reg, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(&i2c->dev, "Failed to register da9121 regulator\n");
+		return PTR_ERR(rdev);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id da9121_i2c_id[] = {
+	{ "da9121", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, da9121_i2c_id);
+
+static struct i2c_driver da9121_regulator_driver = {
+	.driver = {
+		.name = "da9121",
+		.of_match_table = of_match_ptr(da9121_dt_ids),
+	},
+	.probe = da9121_i2c_probe,
+	.id_table = da9121_i2c_id,
+};
+
+module_i2c_driver(da9121_regulator_driver);
+
+MODULE_LICENSE("GPL v2");