From: Krzysztof Kozlowski <krzk@kernel.org>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh+dt@kernel.org>, Han Xu <han.xu@nxp.com>,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v4] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
Date: Thu, 29 Oct 2020 17:20:21 +0100 [thread overview]
Message-ID: <20201029162021.80839-1-krzk@kernel.org> (raw)
Driver requires different amount of clocks for different SoCs. Describe
these requirements properly to fix dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: nand-controller@33002000: clock-names:1: 'gpmi_apb' was expected
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Changes since v3:
1. Go back to fixed order of clocks, after explanation from Rob.
Changes since v1:
1. Do not require order of clocks (use pattern).
---
.../devicetree/bindings/mtd/gpmi-nand.yaml | 76 +++++++++++++++----
1 file changed, 61 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
index 28ff8c581837..9d764e654e1d 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -9,9 +9,6 @@ title: Freescale General-Purpose Media Interface (GPMI) binding
maintainers:
- Han Xu <han.xu@nxp.com>
-allOf:
- - $ref: "nand-controller.yaml"
-
description: |
The GPMI nand controller provides an interface to control the NAND
flash chips. The device tree may optionally contain sub-nodes
@@ -58,22 +55,10 @@ properties:
clocks:
minItems: 1
maxItems: 5
- items:
- - description: SoC gpmi io clock
- - description: SoC gpmi apb clock
- - description: SoC gpmi bch clock
- - description: SoC gpmi bch apb clock
- - description: SoC per1 bch clock
clock-names:
minItems: 1
maxItems: 5
- items:
- - const: gpmi_io
- - const: gpmi_apb
- - const: gpmi_bch
- - const: gpmi_bch_apb
- - const: per1_bch
fsl,use-minimum-ecc:
type: boolean
@@ -107,6 +92,67 @@ required:
unevaluatedProperties: false
+allOf:
+ - $ref: "nand-controller.yaml"
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx23-gpmi-nand
+ - fsl,imx28-gpmi-nand
+ then:
+ properties:
+ clocks:
+ items:
+ - description: SoC gpmi io clock
+ clock-names:
+ items:
+ - const: gpmi_io
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6q-gpmi-nand
+ - fsl,imx6sx-gpmi-nand
+ then:
+ properties:
+ clocks:
+ items:
+ - description: SoC gpmi io clock
+ - description: SoC gpmi apb clock
+ - description: SoC gpmi bch clock
+ - description: SoC gpmi bch apb clock
+ - description: SoC per1 bch clock
+ clock-names:
+ items:
+ - const: gpmi_io
+ - const: gpmi_apb
+ - const: gpmi_bch
+ - const: gpmi_bch_apb
+ - const: per1_bch
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx7d-gpmi-nand
+ then:
+ properties:
+ clocks:
+ items:
+ - description: SoC gpmi io clock
+ - description: SoC gpmi bch apb clock
+ clock-names:
+ minItems: 2
+ maxItems: 2
+ items:
+ - const: gpmi_io
+ - const: gpmi_bch_apb
+
examples:
- |
nand-controller@8000c000 {
--
2.25.1
next reply other threads:[~2020-10-29 16:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-29 16:20 Krzysztof Kozlowski [this message]
2020-11-04 21:42 ` [PATCH v4] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs Rob Herring
2020-11-19 21:20 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201029162021.80839-1-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=han.xu@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).