From: Willy Liu <willy.liu@realtek.com>
To: <andrew@lunn.ch>
Cc: <hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
<davem@davemloft.net>, <kuba@kernel.org>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<ryankao@realtek.com>, Willy Liu <willy.liu@realtek.com>
Subject: [PATCH net-next] net: phy: realtek: Add support for RTL8221B-CG series
Date: Fri, 30 Oct 2020 13:56:20 +0800 [thread overview]
Message-ID: <1604037380-16735-1-git-send-email-willy.liu@realtek.com> (raw)
Realtek single-port 2.5Gbps Ethernet PHYs are list as below:
RTL8226-CG: the 1st generation 2.5Gbps single port PHY
RTL8226B-CG/RTL8221B-CG: the 2nd generation 2.5Gbps single port PHY
RTL8221B-VB-CG: the 3rd generation 2.5Gbps single port PHY
RTL8221B-VM-CG: the 2.5Gbps single port PHY with MACsec feature
This patch adds the minimal drivers to manage these transceivers.
Signed-off-by: Willy Liu <willy.liu@realtek.com>
---
drivers/net/phy/realtek.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
mode change 100644 => 100755 drivers/net/phy/realtek.c
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
old mode 100644
new mode 100755
index fb1db71..2ba0d73
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -660,6 +660,46 @@ static int rtlgen_resume(struct phy_device *phydev)
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
}, {
+ PHY_ID_MATCH_EXACT(0x001cc838),
+ .name = "RTL8226-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc848),
+ .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc849),
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(0x001cc84a),
+ .name = "RTL8221B-VM-CG 2.5Gbps PHY",
+ .get_features = rtl822x_get_features,
+ .config_aneg = rtl822x_config_aneg,
+ .read_status = rtl822x_read_status,
+ .suspend = genphy_suspend,
+ .resume = rtlgen_resume,
+ .read_page = rtl821x_read_page,
+ .write_page = rtl821x_write_page,
+ }, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
.config_init = &rtl8366rb_config_init,
--
1.9.1
next reply other threads:[~2020-10-30 5:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-30 5:56 Willy Liu [this message]
2020-10-30 15:33 ` [PATCH net-next] net: phy: realtek: Add support for RTL8221B-CG series Jakub Kicinski
2020-10-30 15:54 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1604037380-16735-1-git-send-email-willy.liu@realtek.com \
--to=willy.liu@realtek.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=ryankao@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).