From: Matteo Scordino <matteo.scordino@gmail.com>
To: mripard@kernel.org, wens@csie.org, robh+dt@kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org,
Matteo Scordino <matteo.scordino@gmail.com>
Subject: [PATCH v2 2/6] ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi
Date: Fri, 30 Oct 2020 23:43:21 +0000 [thread overview]
Message-ID: <20201030234325.5865-3-matteo.scordino@gmail.com> (raw)
In-Reply-To: <20201029022000.601913-1-matteo.scordino@gmail.com>
The Allwinner V3 and S3 can use PG6/7 as RX/TX for UART1. Since no other
functions are assigned to those pins, they are a convenient choice for
a debugging or application UART.
This is specific to V3/S3 as the V3s's non-BGA package did not have
those pins.
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
---
arch/arm/boot/dts/sun8i-v3.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi
index ca4672ed2e02..c279e13583ba 100644
--- a/arch/arm/boot/dts/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3.dtsi
@@ -24,4 +24,9 @@
&pio {
compatible = "allwinner,sun8i-v3-pinctrl";
+
+ uart1_pg_pins: uart1-pg-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
};
--
2.20.1
next prev parent reply other threads:[~2020-10-30 23:43 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-29 2:19 [PATCH 0/5] Elimo Impetus and Initium support Matteo Scordino
2020-10-29 2:19 ` [PATCH 1/5] dt-bindings: vendors: add Elimo Engineering vendor prefix Matteo Scordino
2020-10-29 10:05 ` Paul Kocialkowski
2020-10-29 2:19 ` [PATCH 2/5] ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi Matteo Scordino
2020-10-29 10:04 ` Paul Kocialkowski
2020-10-29 2:19 ` [PATCH 3/5] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-10-29 10:09 ` Paul Kocialkowski
2020-10-30 0:18 ` Matteo Scordino
2020-10-29 2:19 ` [PATCH 4/5] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-10-29 10:13 ` Maxime Ripard
2020-10-29 10:24 ` Icenowy Zheng
2020-10-30 0:24 ` Matteo Scordino
2020-10-30 10:33 ` Icenowy Zheng
2020-10-29 2:20 ` [PATCH 5/5] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-10-29 10:10 ` Paul Kocialkowski
2020-10-30 0:26 ` Matteo Scordino
2020-10-30 23:43 ` [PATCH v2 0/6] Elimo Impetus and Initium support - rework Matteo Scordino
2020-10-30 23:43 ` [PATCH v2 1/6] dt-bindings: vendors: add Elimo Engineering vendor prefix Matteo Scordino
2020-11-02 10:02 ` Maxime Ripard
2020-10-30 23:43 ` Matteo Scordino [this message]
2020-11-02 10:03 ` [PATCH v2 2/6] ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 3/6] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-11-02 10:05 ` Maxime Ripard
2020-11-03 16:28 ` Matteo Scordino
2020-11-04 19:04 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 4/6] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-10-30 23:43 ` [PATCH v2 5/6] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-11-02 10:06 ` Maxime Ripard
2020-11-03 16:33 ` Matteo Scordino
2020-11-04 19:05 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 6/6] ARM: dts: sunxi: align pinecube compatible property to other S3 boards Matteo Scordino
2020-11-02 10:07 ` Maxime Ripard
2020-11-05 14:49 ` [PATCH v3 0/3] Elimo Impetus and Initium support Matteo Scordino
2020-11-05 14:49 ` [PATCH v3 1/3] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-11-05 14:49 ` [PATCH v3 2/3] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-11-05 14:49 ` [PATCH v3 3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-11-05 15:00 ` Maxime Ripard
2020-11-05 18:29 ` Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 0/3] Elimo Impetus and Initium support Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 1/3] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 2/3] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-11-06 10:47 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201030234325.5865-3-matteo.scordino@gmail.com \
--to=matteo.scordino@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).