[1/5] crypto: hisilicon/hpre - add initial settings adapt to 'Kunpeng 930'
diff mbox series

Message ID 1604126068-29195-2-git-send-email-yumeng18@huawei.com
State New
Headers show
Series
  • crypto: hisilicon/hpre - add something for 'Kunpeng 930'
Related show

Commit Message

Meng Yu Oct. 31, 2020, 6:34 a.m. UTC
From: Hui Tang <tanghui20@huawei.com>

HPRE device 'Kunpeng 930' is updated based on 'Kunpeng 920', and they
are not all the same, such as cluster numbers and configuration of some
registers, so we try to update this driver to make it running okay not
only on 'Kunpeng 920', but also okay on 'Kunpeng 930' in this patch.

Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
---
 drivers/crypto/hisilicon/hpre/hpre.h      |  8 ++-
 drivers/crypto/hisilicon/hpre/hpre_main.c | 93 +++++++++++++++++++++----------
 2 files changed, 68 insertions(+), 33 deletions(-)

Patch
diff mbox series

diff --git a/drivers/crypto/hisilicon/hpre/hpre.h b/drivers/crypto/hisilicon/hpre/hpre.h
index f69252b..181c109 100644
--- a/drivers/crypto/hisilicon/hpre/hpre.h
+++ b/drivers/crypto/hisilicon/hpre/hpre.h
@@ -14,8 +14,7 @@  enum {
 	HPRE_CLUSTER0,
 	HPRE_CLUSTER1,
 	HPRE_CLUSTER2,
-	HPRE_CLUSTER3,
-	HPRE_CLUSTERS_NUM,
+	HPRE_CLUSTER3
 };
 
 enum hpre_ctrl_dbgfs_file {
@@ -36,7 +35,10 @@  enum hpre_dfx_dbgfs_file {
 	HPRE_DFX_FILE_NUM
 };
 
-#define HPRE_DEBUGFS_FILE_NUM    (HPRE_DEBUG_FILE_NUM + HPRE_CLUSTERS_NUM - 1)
+#define HPRE_CLUSTERS_NUM_V2		(HPRE_CLUSTER3 + 1)
+#define HPRE_CLUSTERS_NUM_V3		1
+#define HPRE_CLUSTERS_NUM_MAX		HPRE_CLUSTERS_NUM_V2
+#define HPRE_DEBUGFS_FILE_NUM (HPRE_DEBUG_FILE_NUM + HPRE_CLUSTERS_NUM_MAX - 1)
 
 struct hpre_debugfs_file {
 	int index;
diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c
index a33394d..719f8715 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_main.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_main.c
@@ -29,6 +29,8 @@ 
 #define HPRE_BD_ARUSR_CFG		0x301030
 #define HPRE_BD_AWUSR_CFG		0x301034
 #define HPRE_TYPES_ENB			0x301038
+#define HPRE_RSA_ENB			BIT(0)
+#define HPRE_ECC_ENB			BIT(1)
 #define HPRE_DATA_RUSER_CFG		0x30103c
 #define HPRE_DATA_WUSER_CFG		0x301040
 #define HPRE_INT_MASK			0x301400
@@ -73,7 +75,8 @@ 
 #define HPRE_QM_AXI_CFG_MASK		0xffff
 #define HPRE_QM_VFG_AX_MASK		0xff
 #define HPRE_BD_USR_MASK		0x3
-#define HPRE_CLUSTER_CORE_MASK		0xf
+#define HPRE_CLUSTER_CORE_MASK_V2	0xf
+#define HPRE_CLUSTER_CORE_MASK_V3	0xff
 
 #define HPRE_AM_OOO_SHUTDOWN_ENB	0x301044
 #define HPRE_AM_OOO_SHUTDOWN_ENABLE	BIT(0)
@@ -86,6 +89,11 @@ 
 #define HPRE_QM_PM_FLR			BIT(11)
 #define HPRE_QM_SRIOV_FLR		BIT(12)
 
+#define HPRE_CLUSTERS_NUM(qm)		\
+	(((qm)->ver >= QM_HW_V3) ? HPRE_CLUSTERS_NUM_V3 : HPRE_CLUSTERS_NUM_V2)
+#define HPRE_CLUSTER_CORE_MASK(qm)	\
+	(((qm)->ver >= QM_HW_V3) ? HPRE_CLUSTER_CORE_MASK_V3 :\
+		HPRE_CLUSTER_CORE_MASK_V2)
 #define HPRE_VIA_MSI_DSM		1
 #define HPRE_SQE_MASK_OFFSET		8
 #define HPRE_SQE_MASK_LEN		24
@@ -238,8 +246,40 @@  static int hpre_cfg_by_dsm(struct hisi_qm *qm)
 	return 0;
 }
 
+static int hpre_set_cluster(struct hisi_qm *qm)
+{
+	u32 cluster_core_mask = HPRE_CLUSTER_CORE_MASK(qm);
+	u8 clusters_num = HPRE_CLUSTERS_NUM(qm);
+	struct device *dev = &qm->pdev->dev;
+	unsigned long offset;
+	u32 val = 0;
+	int ret, i;
+
+	for (i = 0; i < clusters_num; i++) {
+		offset = i * HPRE_CLSTR_ADDR_INTRVL;
+
+		/* clusters initiating */
+		writel(cluster_core_mask,
+		       HPRE_ADDR(qm, offset + HPRE_CORE_ENB));
+		writel(0x1, HPRE_ADDR(qm, offset + HPRE_CORE_INI_CFG));
+		ret = readl_relaxed_poll_timeout(HPRE_ADDR(qm, offset +
+					HPRE_CORE_INI_STATUS), val,
+					((val & cluster_core_mask) ==
+					cluster_core_mask),
+					HPRE_REG_RD_INTVRL_US,
+					HPRE_REG_RD_TMOUT_US);
+		if (ret) {
+			dev_err(dev,
+				"cluster %d int st status timeout!\n", i);
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
 /*
- * For Hi1620, we shoul disable FLR triggered by hardware (BME/PM/SRIOV).
+ * For Kunpeng 920, we shoul disable FLR triggered by hardware (BME/PM/SRIOV).
  * Or it may stay in D3 state when we bind and unbind hpre quickly,
  * as it does FLR triggered by hardware.
  */
@@ -257,9 +297,8 @@  static void disable_flr_of_bme(struct hisi_qm *qm)
 static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 {
 	struct device *dev = &qm->pdev->dev;
-	unsigned long offset;
-	int ret, i;
 	u32 val;
+	int ret;
 
 	writel(HPRE_QM_USR_CFG_MASK, HPRE_ADDR(qm, QM_ARUSER_M_CFG_ENABLE));
 	writel(HPRE_QM_USR_CFG_MASK, HPRE_ADDR(qm, QM_AWUSER_M_CFG_ENABLE));
@@ -270,7 +309,12 @@  static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 	val |= BIT(HPRE_TIMEOUT_ABNML_BIT);
 	writel_relaxed(val, HPRE_ADDR(qm, HPRE_QM_ABNML_INT_MASK));
 
-	writel(0x1, HPRE_ADDR(qm, HPRE_TYPES_ENB));
+	if (qm->ver >= QM_HW_V3)
+		writel(HPRE_RSA_ENB | HPRE_ECC_ENB,
+			HPRE_ADDR(qm, HPRE_TYPES_ENB));
+	else
+		writel(HPRE_RSA_ENB, HPRE_ADDR(qm, HPRE_TYPES_ENB));
+
 	writel(HPRE_QM_VFG_AX_MASK, HPRE_ADDR(qm, HPRE_VFG_AXCACHE));
 	writel(0x0, HPRE_ADDR(qm, HPRE_BD_ENDIAN));
 	writel(0x0, HPRE_ADDR(qm, HPRE_INT_MASK));
@@ -291,37 +335,25 @@  static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
 		return -ETIMEDOUT;
 	}
 
-	for (i = 0; i < HPRE_CLUSTERS_NUM; i++) {
-		offset = i * HPRE_CLSTR_ADDR_INTRVL;
-
-		/* clusters initiating */
-		writel(HPRE_CLUSTER_CORE_MASK,
-		       HPRE_ADDR(qm, offset + HPRE_CORE_ENB));
-		writel(0x1, HPRE_ADDR(qm, offset + HPRE_CORE_INI_CFG));
-		ret = readl_relaxed_poll_timeout(HPRE_ADDR(qm, offset +
-					HPRE_CORE_INI_STATUS), val,
-					((val & HPRE_CLUSTER_CORE_MASK) ==
-					HPRE_CLUSTER_CORE_MASK),
-					HPRE_REG_RD_INTVRL_US,
-					HPRE_REG_RD_TMOUT_US);
-		if (ret) {
-			dev_err(dev,
-				"cluster %d int st status timeout!\n", i);
-			return -ETIMEDOUT;
-		}
-	}
-
-	ret = hpre_cfg_by_dsm(qm);
+	ret = hpre_set_cluster(qm);
 	if (ret)
-		dev_err(dev, "acpi_evaluate_dsm err.\n");
+		return -ETIMEDOUT;
 
-	disable_flr_of_bme(qm);
+	/* This setting is only needed by Kunpeng 920. */
+	if (qm->ver == QM_HW_V2) {
+		ret = hpre_cfg_by_dsm(qm);
+		if (ret)
+			dev_err(dev, "acpi_evaluate_dsm err.\n");
+
+		disable_flr_of_bme(qm);
+	}
 
 	return ret;
 }
 
 static void hpre_cnt_regs_clear(struct hisi_qm *qm)
 {
+	u8 clusters_num = HPRE_CLUSTERS_NUM(qm);
 	unsigned long offset;
 	int i;
 
@@ -330,7 +362,7 @@  static void hpre_cnt_regs_clear(struct hisi_qm *qm)
 	writel(0x0, qm->io_base + QM_DFX_DB_CNT_VF);
 
 	/* clear clusterX/cluster_ctrl */
-	for (i = 0; i < HPRE_CLUSTERS_NUM; i++) {
+	for (i = 0; i < clusters_num; i++) {
 		offset = HPRE_CLSTR_BASE + i * HPRE_CLSTR_ADDR_INTRVL;
 		writel(0x0, qm->io_base + offset + HPRE_CLUSTER_INQURY);
 	}
@@ -629,13 +661,14 @@  static int hpre_pf_comm_regs_debugfs_init(struct hisi_qm *qm)
 
 static int hpre_cluster_debugfs_init(struct hisi_qm *qm)
 {
+	u8 clusters_num = HPRE_CLUSTERS_NUM(qm);
 	struct device *dev = &qm->pdev->dev;
 	char buf[HPRE_DBGFS_VAL_MAX_LEN];
 	struct debugfs_regset32 *regset;
 	struct dentry *tmp_d;
 	int i, ret;
 
-	for (i = 0; i < HPRE_CLUSTERS_NUM; i++) {
+	for (i = 0; i < clusters_num; i++) {
 		ret = snprintf(buf, HPRE_DBGFS_VAL_MAX_LEN, "cluster%d", i);
 		if (ret < 0)
 			return -EINVAL;