[RESEND 16/19] scsi: advansys: Relocate or remove unused variables

From: Lee Jones <lee.jones@linaro.org>
To: martin.petersen@oracle.com, jejb@linux.ibm.com
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
	Lee Jones <lee.jones@linaro.org>,
	Matthew Wilcox <willy@infradead.org>,
	Hannes Reinecke <hare@suse.com>
Subject: [RESEND 16/19] scsi: advansys: Relocate or remove unused variables
Date: Mon,  2 Nov 2020 14:23:56 +0000	[thread overview]
Message-ID: <20201102142359.561122-17-lee.jones@linaro.org> (raw)
In-Reply-To: <20201102142359.561122-1-lee.jones@linaro.org>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/advansys.c: In function ‘asc_prt_asc_board_eeprom’:
 drivers/scsi/advansys.c:2879:15: warning: variable ‘asc_dvc_varp’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/advansys.c: In function ‘asc_prt_driver_conf’:
 drivers/scsi/advansys.c:3174:6: warning: variable ‘chip_scsi_id’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/advansys.c: In function ‘AdvISR’:
 drivers/scsi/advansys.c:6114:9: warning: variable ‘target_bit’ set but not used [-Wunused-but-set-variable]

Cc: Matthew Wilcox <willy@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/scsi/advansys.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index c2c7850ff7b42..79830e77afa97 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -2876,15 +2876,15 @@ static int asc_get_eeprom_string(ushort *serialnum, uchar *cp)
 static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost)
 {
 	struct asc_board *boardp = shost_priv(shost);
-	ASC_DVC_VAR *asc_dvc_varp;
 	ASCEEP_CONFIG *ep;
 	int i;
+	uchar serialstr[13];
 #ifdef CONFIG_ISA
+	ASC_DVC_VAR *asc_dvc_varp;
 	int isa_dma_speed[] = { 10, 8, 7, 6, 5, 4, 3, 2 };
-#endif /* CONFIG_ISA */
-	uchar serialstr[13];
 
 	asc_dvc_varp = &boardp->dvc_var.asc_dvc_var;
+#endif /* CONFIG_ISA */
 	ep = &boardp->eep_config.asc_eep;
 
 	seq_printf(m,
@@ -3171,7 +3171,6 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost)
 {
 	struct asc_board *boardp = shost_priv(shost);
-	int chip_scsi_id;
 
 	seq_printf(m,
 		"\nLinux Driver Configuration and Information for AdvanSys SCSI Host %d:\n",
@@ -3197,12 +3196,6 @@ static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost)
 		   boardp->asc_n_io_port);
 
 	seq_printf(m, " io_port 0x%lx\n", shost->io_port);
-
-	if (ASC_NARROW_BOARD(boardp)) {
-		chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id;
-	} else {
-		chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id;
-	}
 }
 
 /*
@@ -6111,7 +6104,6 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
 {
 	AdvPortAddr iop_base;
 	uchar int_stat;
-	ushort target_bit;
 	ADV_CARR_T *free_carrp;
 	__le32 irq_next_vpa;
 	ADV_SCSI_REQ_Q *scsiq;
@@ -6198,8 +6190,6 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
 		asc_dvc->carr_freelist = free_carrp;
 		asc_dvc->carr_pending_cnt--;
 
-		target_bit = ADV_TID_TO_TIDMASK(scsiq->target_id);
-
 		/*
 		 * Clear request microcode control flag.
 		 */
-- 
2.25.1

