From: <rui_feng@realsil.com.cn>
To: <arnd@arndb.de>, <gregkh@linuxfoundation.org>, <ulf.hansson@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
Rui Feng <rui_feng@realsil.com.cn>
Subject: [PATCH] misc: rtsx: Fix some bugs and add test mode for rts5261
Date: Tue, 3 Nov 2020 11:27:15 +0800 [thread overview]
Message-ID: <1604374035-2945-1-git-send-email-rui_feng@realsil.com.cn> (raw)
From: Rui Feng <rui_feng@realsil.com.cn>
1.Add force test mode
2.Fix OCP function
3.Use aspm in way of backdoor
4.Fix PAD driving
5.Not support MMC default
6.Support CD&WP reverse
7.Add hardware auto power down when unplug card
Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
---
drivers/misc/cardreader/rts5261.c | 59 +++++++++++++++++++++++--------
drivers/misc/cardreader/rts5261.h | 15 ++++----
drivers/mmc/host/rtsx_pci_sdmmc.c | 20 +++++++++--
include/linux/rtsx_pci.h | 7 ++++
4 files changed, 75 insertions(+), 26 deletions(-)
diff --git a/drivers/misc/cardreader/rts5261.c b/drivers/misc/cardreader/rts5261.c
index 536c90d4fd76..bf5c6776466d 100644
--- a/drivers/misc/cardreader/rts5261.c
+++ b/drivers/misc/cardreader/rts5261.c
@@ -26,16 +26,16 @@ static u8 rts5261_get_ic_version(struct rtsx_pcr *pcr)
static void rts5261_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
{
u8 driving_3v3[4][3] = {
- {0x13, 0x13, 0x13},
{0x96, 0x96, 0x96},
- {0x7F, 0x7F, 0x7F},
{0x96, 0x96, 0x96},
+ {0x7F, 0x7F, 0x7F},
+ {0x13, 0x13, 0x13},
};
u8 driving_1v8[4][3] = {
- {0x99, 0x99, 0x99},
+ {0xB3, 0xB3, 0xB3},
{0x3A, 0x3A, 0x3A},
{0xE6, 0xE6, 0xE6},
- {0xB3, 0xB3, 0xB3},
+ {0x99, 0x99, 0x99},
};
u8 (*driving)[3], drive_sel;
@@ -67,12 +67,17 @@ static void rtsx5261_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
if (!rts5261_vendor_setting_valid(reg)) {
+ /* Not support MMC default */
+ pcr->extra_caps |= EXTRA_CAPS_NO_MMC;
pcr_dbg(pcr, "skip fetch vendor setting\n");
return;
}
- pcr->card_drive_sel &= 0x3F;
- pcr->card_drive_sel |= rts5261_reg_to_card_drive_sel(reg);
+ if (!rts5261_reg_check_mmc_support(reg))
+ pcr->extra_caps |= EXTRA_CAPS_NO_MMC;
+
+ /* TO do: need to add rtd3 function */
+ pcr->rtd3_en = rts5261_reg_to_rtd3(reg);
if (rts5261_reg_check_reverse_socket(reg))
pcr->flags |= PCR_REVERSE_SOCKET;
@@ -171,6 +176,8 @@ static int rts5261_card_power_on(struct rtsx_pcr *pcr, int card)
if (option->ocp_en)
rtsx_pci_enable_ocp(pcr);
+ rtsx_pci_write_register(pcr, REG_CRC_DUMMY_0,
+ CFG_SD_POW_AUTO_PD, CFG_SD_POW_AUTO_PD);
rtsx_pci_write_register(pcr, RTS5261_LDO1_CFG1,
RTS5261_LDO1_TUNE_MASK, RTS5261_LDO1_33);
@@ -272,6 +279,9 @@ static void rts5261_enable_ocp(struct rtsx_pcr *pcr)
u8 val = 0;
val = SD_OCP_INT_EN | SD_DETECT_EN;
+ rtsx_pci_write_register(pcr, RTS5261_LDO1_CFG0,
+ RTS5261_LDO1_OCP_EN | RTS5261_LDO1_OCP_LMT_EN,
+ RTS5261_LDO1_OCP_EN | RTS5261_LDO1_OCP_LMT_EN);
rtsx_pci_write_register(pcr, REG_OCPCTL, 0xFF, val);
}
@@ -295,6 +305,8 @@ static int rts5261_card_power_off(struct rtsx_pcr *pcr, int card)
err = rtsx_pci_write_register(pcr, RTS5261_LDO1233318_POW_CTL,
RTS5261_LDO_POWERON_MASK, 0);
+ rtsx_pci_write_register(pcr, REG_CRC_DUMMY_0,
+ CFG_SD_POW_AUTO_PD, 0);
if (pcr->option.ocp_en)
rtsx_pci_disable_ocp(pcr);
@@ -340,7 +352,7 @@ static void rts5261_clear_ocpstat(struct rtsx_pcr *pcr)
rtsx_pci_write_register(pcr, REG_OCPCTL, mask, val);
- udelay(10);
+ udelay(1000);
rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0);
}
@@ -353,9 +365,9 @@ static void rts5261_process_ocp(struct rtsx_pcr *pcr)
rtsx_pci_get_ocpstat(pcr, &pcr->ocp_stat);
if (pcr->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
+ rts5261_clear_ocpstat(pcr);
rts5261_card_power_off(pcr, RTSX_SD_CARD);
rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, 0);
- rts5261_clear_ocpstat(pcr);
pcr->ocp_stat = 0;
}
@@ -467,6 +479,7 @@ static void rts5261_init_from_cfg(struct rtsx_pcr *pcr)
static int rts5261_extra_init_hw(struct rtsx_pcr *pcr)
{
struct rtsx_cr_option *option = &pcr->option;
+ u32 val;
rtsx_pci_write_register(pcr, RTS5261_AUTOLOAD_CFG1,
CD_RESUME_EN_MASK, CD_RESUME_EN_MASK);
@@ -481,6 +494,10 @@ static int rts5261_extra_init_hw(struct rtsx_pcr *pcr)
AUX_CLK_ACTIVE_SEL_MASK, MAC_CKSW_DONE);
rtsx_pci_write_register(pcr, L1SUB_CONFIG3, 0xFF, 0);
+ if (is_version_higher_than(pcr, PID_5261, IC_VER_B)) {
+ val = rtsx_pci_readl(pcr, RTSX_DUM_REG);
+ rtsx_pci_writel(pcr, RTSX_DUM_REG, val | 0x1);
+ }
rtsx_pci_write_register(pcr, RTS5261_AUTOLOAD_CFG4,
RTS5261_AUX_CLK_16M_EN, 0);
@@ -502,6 +519,10 @@ static int rts5261_extra_init_hw(struct rtsx_pcr *pcr)
/* Configure driving */
rts5261_fill_driving(pcr, OUTPUT_3V3);
+ if (pcr->flags & PCR_REVERSE_SOCKET)
+ rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x30);
+ else
+ rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x00);
/*
* If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced
* to drive low, and we forcibly request clock.
@@ -513,6 +534,7 @@ static int rts5261_extra_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_write_register(pcr, PETXCFG,
FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH);
+ rtsx_pci_write_register(pcr, PWD_SUSPEND_EN, 0xFF, 0xFB);
rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x10, 0x00);
rtsx_pci_write_register(pcr, RTS5261_REG_PME_FORCE_CTL,
FORCE_PM_CONTROL | FORCE_PM_VALUE, FORCE_PM_CONTROL);
@@ -526,22 +548,31 @@ static int rts5261_extra_init_hw(struct rtsx_pcr *pcr)
static void rts5261_enable_aspm(struct rtsx_pcr *pcr, bool enable)
{
+ u8 val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
+ u8 mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
+
if (pcr->aspm_enabled == enable)
return;
+ val |= (pcr->aspm_en & 0x02);
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
PCI_EXP_LNKCTL_ASPMC, pcr->aspm_en);
pcr->aspm_enabled = enable;
-
}
static void rts5261_disable_aspm(struct rtsx_pcr *pcr, bool enable)
{
+ u8 val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
+ u8 mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
+
if (pcr->aspm_enabled == enable)
return;
pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC, 0);
+ PCI_EXP_LNKCTL_ASPMC, 0);
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
+
rtsx_pci_write_register(pcr, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
udelay(10);
pcr->aspm_enabled = enable;
@@ -618,7 +649,7 @@ int rts5261_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
if (initial_mode) {
/* We use 250k(around) here, in initial stage */
- if (is_version(pcr, PID_5261, IC_VER_D)) {
+ if (is_version_higher_than(pcr, PID_5261, IC_VER_C)) {
clk_divider = SD_CLK_DIVIDE_256;
card_clock = 60000000;
} else {
@@ -669,7 +700,7 @@ int rts5261_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
div++;
}
- n = (n / 2);
+ n = (n / 2) - 1;
pcr_dbg(pcr, "n = %d, div = %d\n", n, div);
ssc_depth = depth[ssc_depth];
@@ -749,8 +780,8 @@ void rts5261_init_params(struct rtsx_pcr *pcr)
pcr->flags = 0;
pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
- pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
- pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
+ pcr->sd30_drive_sel_1v8 = 0x00;
+ pcr->sd30_drive_sel_3v3 = 0x00;
pcr->aspm_en = ASPM_L1_EN;
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 11);
pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
diff --git a/drivers/misc/cardreader/rts5261.h b/drivers/misc/cardreader/rts5261.h
index 8d80f0d5d5d6..cd4bdba6ae7e 100644
--- a/drivers/misc/cardreader/rts5261.h
+++ b/drivers/misc/cardreader/rts5261.h
@@ -12,11 +12,13 @@
/*New add*/
#define rts5261_vendor_setting_valid(reg) ((reg) & 0x010000)
-#define rts5261_reg_to_aspm(reg) (((reg) >> 28) ^ 0x03)
+#define rts5261_reg_to_aspm(reg) \
+ (((~(reg) >> 28) & 0x02) | (((reg) >> 28) & 0x01))
#define rts5261_reg_check_reverse_socket(reg) ((reg) & 0x04)
-#define rts5261_reg_to_card_drive_sel(reg) ((((reg) >> 6) & 0x01) << 6)
-#define rts5261_reg_to_sd30_drive_sel_1v8(reg) (((reg) >> 22) ^ 0x03)
-#define rts5261_reg_to_sd30_drive_sel_3v3(reg) (((reg) >> 16) ^ 0x03)
+#define rts5261_reg_to_sd30_drive_sel_1v8(reg) (((reg) >> 22) & 0x03)
+#define rts5261_reg_to_sd30_drive_sel_3v3(reg) (((reg) >> 16) & 0x03)
+#define rts5261_reg_to_rtd3(reg) ((reg) & 0x08)
+#define rts5261_reg_check_mmc_support(reg) ((reg) & 0x10)
#define RTS5261_AUTOLOAD_CFG0 0xFF7B
@@ -60,11 +62,6 @@
/* DMACTL 0xFE2C */
#define RTS5261_DMA_PACK_SIZE_MASK 0xF0
-/* FW config info register */
-#define RTS5261_FW_CFG_INFO0 0xFF50
-#define RTS5261_FW_EXPRESS_TEST_MASK (0x01<<0)
-#define RTS5261_FW_EA_MODE_MASK (0x01<<5)
-
/* FW status register */
#define RTS5261_FW_STATUS 0xFF56
#define RTS5261_EXPRESS_LINK_FAIL_MASK (0x01<<7)
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index c453ad403aa8..6c56b5518bc5 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -47,6 +47,8 @@ struct realtek_pci_sdmmc {
bool using_cookie;
};
+static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios);
+
static inline struct device *sdmmc_dev(struct realtek_pci_sdmmc *host)
{
return &(host->pdev->dev);
@@ -898,6 +900,7 @@ static int sd_power_on(struct realtek_pci_sdmmc *host)
struct mmc_host *mmc = host->mmc;
int err;
u32 val;
+ u8 test_mode;
if (host->power_state == SDMMC_POWER_ON)
return 0;
@@ -925,6 +928,15 @@ static int sd_power_on(struct realtek_pci_sdmmc *host)
return err;
if (PCI_PID(pcr) == PID_5261) {
+ /*
+ * If test mode is set switch to SD Express mandatorily,
+ * this is only for factory testing.
+ */
+ rtsx_pci_read_register(pcr, RTS5261_FW_CFG_INFO0, &test_mode);
+ if (test_mode & RTS5261_FW_EXPRESS_TEST_MASK) {
+ sdmmc_init_sd_express(mmc, NULL);
+ return 0;
+ }
if (pcr->extra_caps & EXTRA_CAPS_SD_EXPRESS)
mmc->caps2 |= MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V;
/*
@@ -1354,11 +1366,13 @@ static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
RTS5261_AUX_CLK_16M_EN, RTS5261_AUX_CLK_16M_EN);
rtsx_pci_write_register(pcr, RTS5261_FW_CFG0,
RTS5261_FW_ENTER_EXPRESS, RTS5261_FW_ENTER_EXPRESS);
+ rtsx_pci_write_register(pcr, RTS5261_FW_CFG1,
+ RTS5261_MCU_CLOCK_GATING, RTS5261_MCU_CLOCK_GATING);
+
rtsx_pci_write_register(pcr, RTS5261_FW_CFG1,
RTS5261_MCU_BUS_SEL_MASK | RTS5261_MCU_CLOCK_SEL_MASK
- | RTS5261_MCU_CLOCK_GATING | RTS5261_DRIVER_ENABLE_FW,
- RTS5261_MCU_CLOCK_SEL_16M | RTS5261_MCU_CLOCK_GATING
- | RTS5261_DRIVER_ENABLE_FW);
+ | RTS5261_DRIVER_ENABLE_FW,
+ RTS5261_MCU_CLOCK_SEL_16M | RTS5261_DRIVER_ENABLE_FW);
host->eject = true;
return 0;
}
diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h
index b47959f48ccd..d36e96974bce 100644
--- a/include/linux/rtsx_pci.h
+++ b/include/linux/rtsx_pci.h
@@ -82,6 +82,7 @@
#define MS_OC_INT_EN (1 << 23)
#define SD_OC_INT_EN (1 << 22)
+#define RTSX_DUM_REG 0x1C
/*
* macros for easy use
@@ -658,6 +659,10 @@
#define PM_WAKE_EN 0x01
#define PM_CTRL4 0xFF47
+/* FW config info register */
+#define RTS5261_FW_CFG_INFO0 0xFF50
+#define RTS5261_FW_EXPRESS_TEST_MASK (0x01 << 0)
+#define RTS5261_FW_EA_MODE_MASK (0x01 << 5)
#define RTS5261_FW_CFG0 0xFF54
#define RTS5261_FW_ENTER_EXPRESS (0x01 << 0)
@@ -1268,6 +1273,8 @@ struct rtsx_pcr {
#define PCI_PID(pcr) ((pcr)->pci->device)
#define is_version(pcr, pid, ver) \
(CHK_PCI_PID(pcr, pid) && (pcr)->ic_version == (ver))
+#define is_version_higher_than(pcr, pid, ver) \
+ (CHK_PCI_PID(pcr, pid) && (pcr)->ic_version > (ver))
#define pcr_dbg(pcr, fmt, arg...) \
dev_dbg(&(pcr)->pci->dev, fmt, ##arg)
--
2.17.1
next reply other threads:[~2020-11-03 3:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-03 3:27 rui_feng [this message]
2020-11-03 6:38 ` [PATCH] misc: rtsx: Fix some bugs and add test mode for rts5261 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1604374035-2945-1-git-send-email-rui_feng@realsil.com.cn \
--to=rui_feng@realsil.com.cn \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).