From: <rui_feng@realsil.com.cn>
To: <arnd@arndb.de>, <gregkh@linuxfoundation.org>, <ulf.hansson@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
Rui Feng <rui_feng@realsil.com.cn>
Subject: [PATCH 1/8] mmc: rtsx: Add test mode for RTS5261
Date: Tue, 3 Nov 2020 17:54:29 +0800 [thread overview]
Message-ID: <1604397269-2780-1-git-send-email-rui_feng@realsil.com.cn> (raw)
From: Rui Feng <rui_feng@realsil.com.cn>
This patch add test mode for RTS5261.
If test mode is set, reader will switch to SD Express mode
mandatorily, and this mode is used by factory testing only.
Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
---
drivers/misc/cardreader/rts5261.h | 5 -----
drivers/mmc/host/rtsx_pci_sdmmc.c | 19 ++++++++++++++++---
include/linux/rtsx_pci.h | 4 ++++
3 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/misc/cardreader/rts5261.h b/drivers/misc/cardreader/rts5261.h
index 8d80f0d5d5d6..80179353bc46 100644
--- a/drivers/misc/cardreader/rts5261.h
+++ b/drivers/misc/cardreader/rts5261.h
@@ -60,11 +60,6 @@
/* DMACTL 0xFE2C */
#define RTS5261_DMA_PACK_SIZE_MASK 0xF0
-/* FW config info register */
-#define RTS5261_FW_CFG_INFO0 0xFF50
-#define RTS5261_FW_EXPRESS_TEST_MASK (0x01<<0)
-#define RTS5261_FW_EA_MODE_MASK (0x01<<5)
-
/* FW status register */
#define RTS5261_FW_STATUS 0xFF56
#define RTS5261_EXPRESS_LINK_FAIL_MASK (0x01<<7)
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index c453ad403aa8..26be11a096cb 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -47,6 +47,8 @@ struct realtek_pci_sdmmc {
bool using_cookie;
};
+static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios);
+
static inline struct device *sdmmc_dev(struct realtek_pci_sdmmc *host)
{
return &(host->pdev->dev);
@@ -898,6 +900,7 @@ static int sd_power_on(struct realtek_pci_sdmmc *host)
struct mmc_host *mmc = host->mmc;
int err;
u32 val;
+ u8 test_mode;
if (host->power_state == SDMMC_POWER_ON)
return 0;
@@ -925,6 +928,15 @@ static int sd_power_on(struct realtek_pci_sdmmc *host)
return err;
if (PCI_PID(pcr) == PID_5261) {
+ /*
+ * If test mode is set switch to SD Express mandatorily,
+ * this is only for factory testing.
+ */
+ rtsx_pci_read_register(pcr, RTS5261_FW_CFG_INFO0, &test_mode);
+ if (test_mode & RTS5261_FW_EXPRESS_TEST_MASK) {
+ sdmmc_init_sd_express(mmc, NULL);
+ return 0;
+ }
if (pcr->extra_caps & EXTRA_CAPS_SD_EXPRESS)
mmc->caps2 |= MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V;
/*
@@ -1354,11 +1366,12 @@ static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
RTS5261_AUX_CLK_16M_EN, RTS5261_AUX_CLK_16M_EN);
rtsx_pci_write_register(pcr, RTS5261_FW_CFG0,
RTS5261_FW_ENTER_EXPRESS, RTS5261_FW_ENTER_EXPRESS);
+ rtsx_pci_write_register(pcr, RTS5261_FW_CFG1,
+ RTS5261_MCU_CLOCK_GATING, RTS5261_MCU_CLOCK_GATING);
rtsx_pci_write_register(pcr, RTS5261_FW_CFG1,
RTS5261_MCU_BUS_SEL_MASK | RTS5261_MCU_CLOCK_SEL_MASK
- | RTS5261_MCU_CLOCK_GATING | RTS5261_DRIVER_ENABLE_FW,
- RTS5261_MCU_CLOCK_SEL_16M | RTS5261_MCU_CLOCK_GATING
- | RTS5261_DRIVER_ENABLE_FW);
+ | RTS5261_DRIVER_ENABLE_FW,
+ RTS5261_MCU_CLOCK_SEL_16M | RTS5261_DRIVER_ENABLE_FW);
host->eject = true;
return 0;
}
diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h
index b47959f48ccd..db249e8707f3 100644
--- a/include/linux/rtsx_pci.h
+++ b/include/linux/rtsx_pci.h
@@ -658,6 +658,10 @@
#define PM_WAKE_EN 0x01
#define PM_CTRL4 0xFF47
+/* FW config info register */
+#define RTS5261_FW_CFG_INFO0 0xFF50
+#define RTS5261_FW_EXPRESS_TEST_MASK (0x01 << 0)
+#define RTS5261_FW_EA_MODE_MASK (0x01 << 5)
#define RTS5261_FW_CFG0 0xFF54
#define RTS5261_FW_ENTER_EXPRESS (0x01 << 0)
--
2.17.1
next reply other threads:[~2020-11-03 9:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-03 9:54 rui_feng [this message]
2020-11-04 12:37 ` [PATCH 1/8] mmc: rtsx: Add test mode for RTS5261 Ulf Hansson
2020-11-04 12:47 ` Greg Kroah-Hartman
2020-11-05 12:59 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1604397269-2780-1-git-send-email-rui_feng@realsil.com.cn \
--to=rui_feng@realsil.com.cn \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).