From: Matteo Scordino <matteo.scordino@gmail.com>
To: mripard@kernel.org, wens@csie.org, robh+dt@kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org,
Matteo Scordino <matteo.scordino@gmail.com>
Subject: [PATCH v3 3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC
Date: Thu, 5 Nov 2020 14:49:45 +0000 [thread overview]
Message-ID: <20201105144945.484592-4-matteo.scordino@gmail.com> (raw)
In-Reply-To: <20201029022000.601913-1-matteo.scordino@gmail.com>
The Elimo Engineering Initium is an Open Source Hardware Single Board
Computer based on the Elimo Impetus SoM.
It is meant as the first development platform for the Impetus, providing
convenient access to the peripherals on the Impetus.
It provides:
USB-C power input
UART-to-USB bridge on the USB-C connector, connected to UART1
USB-A connector for USB2.0 (Host, Device, OTG)
Audio Line In/Out
Pin header to access all signals on the M2 connector of the SoM
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 34 ++++++++++++++++++++
2 files changed, 35 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4f0adfead547..50e438ab8a00 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1208,6 +1208,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-r16-nintendo-super-nes-classic.dtb \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
+ sun8i-s3-elimo-initium.dtb \
sun8i-s3-lichee-zero-plus.dtb \
sun8i-s3-pinecube.dtb \
sun8i-t3-cqa3t-bv3.dtb \
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
new file mode 100644
index 000000000000..2119403fb65e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+ model = "Elimo Initium";
+ compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+ "allwinner,sun8i-v3";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pg_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ status = "okay";
+};
--
2.20.1
next prev parent reply other threads:[~2020-11-05 14:50 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-29 2:19 [PATCH 0/5] Elimo Impetus and Initium support Matteo Scordino
2020-10-29 2:19 ` [PATCH 1/5] dt-bindings: vendors: add Elimo Engineering vendor prefix Matteo Scordino
2020-10-29 10:05 ` Paul Kocialkowski
2020-10-29 2:19 ` [PATCH 2/5] ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi Matteo Scordino
2020-10-29 10:04 ` Paul Kocialkowski
2020-10-29 2:19 ` [PATCH 3/5] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-10-29 10:09 ` Paul Kocialkowski
2020-10-30 0:18 ` Matteo Scordino
2020-10-29 2:19 ` [PATCH 4/5] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-10-29 10:13 ` Maxime Ripard
2020-10-29 10:24 ` Icenowy Zheng
2020-10-30 0:24 ` Matteo Scordino
2020-10-30 10:33 ` Icenowy Zheng
2020-10-29 2:20 ` [PATCH 5/5] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-10-29 10:10 ` Paul Kocialkowski
2020-10-30 0:26 ` Matteo Scordino
2020-10-30 23:43 ` [PATCH v2 0/6] Elimo Impetus and Initium support - rework Matteo Scordino
2020-10-30 23:43 ` [PATCH v2 1/6] dt-bindings: vendors: add Elimo Engineering vendor prefix Matteo Scordino
2020-11-02 10:02 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 2/6] ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi Matteo Scordino
2020-11-02 10:03 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 3/6] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-11-02 10:05 ` Maxime Ripard
2020-11-03 16:28 ` Matteo Scordino
2020-11-04 19:04 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 4/6] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-10-30 23:43 ` [PATCH v2 5/6] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-11-02 10:06 ` Maxime Ripard
2020-11-03 16:33 ` Matteo Scordino
2020-11-04 19:05 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 6/6] ARM: dts: sunxi: align pinecube compatible property to other S3 boards Matteo Scordino
2020-11-02 10:07 ` Maxime Ripard
2020-11-05 14:49 ` [PATCH v3 0/3] Elimo Impetus and Initium support Matteo Scordino
2020-11-05 14:49 ` [PATCH v3 1/3] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-11-05 14:49 ` [PATCH v3 2/3] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-11-05 14:49 ` Matteo Scordino [this message]
2020-11-05 15:00 ` [PATCH v3 3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Maxime Ripard
2020-11-05 18:29 ` Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 0/3] Elimo Impetus and Initium support Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 1/3] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 2/3] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-11-06 10:47 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201105144945.484592-4-matteo.scordino@gmail.com \
--to=matteo.scordino@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).