[v4,3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC
diff mbox series

Message ID 20201105183231.12952-4-matteo.scordino@gmail.com
State New, archived
Headers show
Series
  • Untitled series #470608
Related show

Commit Message

Matteo Scordino Nov. 5, 2020, 6:32 p.m. UTC
The Elimo Engineering Initium is an Open Source Hardware Single Board
Computer based on the Elimo Impetus SoM.

It is meant as the first development platform for the Impetus, providing
convenient access to the peripherals on the Impetus.

It provides:
USB-C power input
UART-to-USB bridge on the USB-C connector, connected to UART1
USB-A connector for USB2.0 (Host, Device, OTG)
Audio Line In/Out
Pin header to access all signals on the M2 connector of the SoM

Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
---
 arch/arm/boot/dts/Makefile                   |  1 +
 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts | 29 ++++++++++++++++++++
 2 files changed, 30 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts

Comments

Maxime Ripard Nov. 6, 2020, 10:47 a.m. UTC | #1
On Thu, Nov 05, 2020 at 06:32:31PM +0000, Matteo Scordino wrote:
> The Elimo Engineering Initium is an Open Source Hardware Single Board
> Computer based on the Elimo Impetus SoM.
> 
> It is meant as the first development platform for the Impetus, providing
> convenient access to the peripherals on the Impetus.
> 
> It provides:
> USB-C power input
> UART-to-USB bridge on the USB-C connector, connected to UART1
> USB-A connector for USB2.0 (Host, Device, OTG)
> Audio Line In/Out
> Pin header to access all signals on the M2 connector of the SoM
> 
> Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>

Applied all three patches, thanks!
Maxime

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4f0adfead547..50e438ab8a00 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1208,6 +1208,7 @@  dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
 	sun8i-r16-parrot.dtb \
 	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-s3-elimo-initium.dtb \
 	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-s3-pinecube.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
new file mode 100644
index 000000000000..039677c2cc65
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,29 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+	model = "Elimo Initium";
+	compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial1 = &uart1;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};