From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>,
Michael Jamet <michael.jamet@intel.com>,
Andreas Noever <andreas.noever@gmail.com>,
Lukas Wunner <lukas@wunner.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Subject: [PATCH 10/12] thunderbolt: Move constants for USB4 router operations to tb_regs.h
Date: Thu, 19 Nov 2020 18:55:21 +0300 [thread overview]
Message-ID: <20201119155523.41332-11-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20201119155523.41332-1-mika.westerberg@linux.intel.com>
We are going to use these in subsequent patch so make them available
outside of usb4.c.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
drivers/thunderbolt/tb_regs.h | 13 +++++++++++++
drivers/thunderbolt/usb4.c | 12 ------------
2 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index 67cb173a2f8e..ae427a953489 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -217,6 +217,19 @@ struct tb_regs_switch_header {
#define ROUTER_CS_26_ONS BIT(30)
#define ROUTER_CS_26_OV BIT(31)
+/* USB4 router operations opcodes */
+enum usb4_switch_op {
+ USB4_SWITCH_OP_QUERY_DP_RESOURCE = 0x10,
+ USB4_SWITCH_OP_ALLOC_DP_RESOURCE = 0x11,
+ USB4_SWITCH_OP_DEALLOC_DP_RESOURCE = 0x12,
+ USB4_SWITCH_OP_NVM_WRITE = 0x20,
+ USB4_SWITCH_OP_NVM_AUTH = 0x21,
+ USB4_SWITCH_OP_NVM_READ = 0x22,
+ USB4_SWITCH_OP_NVM_SET_OFFSET = 0x23,
+ USB4_SWITCH_OP_DROM_READ = 0x24,
+ USB4_SWITCH_OP_NVM_SECTOR_SIZE = 0x25,
+};
+
/* Router TMU configuration */
#define TMU_RTR_CS_0 0x00
#define TMU_RTR_CS_0_TD BIT(27)
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index cbf1c0536360..6a0aa83a1ac8 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -16,18 +16,6 @@
#define USB4_DATA_DWORDS 16
#define USB4_DATA_RETRIES 3
-enum usb4_switch_op {
- USB4_SWITCH_OP_QUERY_DP_RESOURCE = 0x10,
- USB4_SWITCH_OP_ALLOC_DP_RESOURCE = 0x11,
- USB4_SWITCH_OP_DEALLOC_DP_RESOURCE = 0x12,
- USB4_SWITCH_OP_NVM_WRITE = 0x20,
- USB4_SWITCH_OP_NVM_AUTH = 0x21,
- USB4_SWITCH_OP_NVM_READ = 0x22,
- USB4_SWITCH_OP_NVM_SET_OFFSET = 0x23,
- USB4_SWITCH_OP_DROM_READ = 0x24,
- USB4_SWITCH_OP_NVM_SECTOR_SIZE = 0x25,
-};
-
enum usb4_sb_target {
USB4_SB_TARGET_ROUTER,
USB4_SB_TARGET_PARTNER,
--
2.29.2
next prev parent reply other threads:[~2020-11-19 15:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-19 15:55 [PATCH 00/12] thunderbolt: USB4 NVM upgrade improvements & Maple Ridge support Mika Westerberg
2020-11-19 15:55 ` [PATCH 01/12] thunderbolt: Move max_boot_acl field to correct place in struct icm Mika Westerberg
2020-11-19 15:55 ` [PATCH 02/12] thunderbolt: Log which connection manager implementation is used Mika Westerberg
2020-11-19 15:55 ` [PATCH 03/12] thunderbolt: Log adapter numbers in decimal in path activation/deactivation Mika Westerberg
2020-11-19 15:55 ` [PATCH 04/12] thunderbolt: Keep the parent runtime resumed for a while on device disconnect Mika Westerberg
2020-11-19 15:55 ` [PATCH 05/12] thunderbolt: Return -ENOTCONN when ERR_CONN is received Mika Westerberg
2020-11-19 15:55 ` [PATCH 06/12] thunderbolt: Perform USB4 router NVM upgrade in two phases Mika Westerberg
2020-11-19 15:55 ` [PATCH 07/12] thunderbolt: Pass metadata directly to usb4_switch_op() Mika Westerberg
2020-11-19 15:55 ` [PATCH 08/12] thunderbolt: Pass TX and RX data " Mika Westerberg
2020-11-19 15:55 ` [PATCH 09/12] thunderbolt: Add connection manager specific hooks for USB4 router operations Mika Westerberg
2020-11-19 15:55 ` Mika Westerberg [this message]
2020-11-19 15:55 ` [PATCH 11/12] thunderbolt: Add USB4 router operation proxy for firmware connection manager Mika Westerberg
2020-11-19 15:55 ` [PATCH 12/12] thunderbolt: Add support for Intel Maple Ridge Mika Westerberg
2020-11-30 11:44 ` [PATCH 00/12] thunderbolt: USB4 NVM upgrade improvements & Maple Ridge support Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201119155523.41332-11-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=michael.jamet@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).