From: Neil Armstrong <narmstrong@baylibre.com>
To: jbrunet@baylibre.com
Cc: linux-clk@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/2] clk: meson: g12a: add MIPI DSI Host Pixel Clock
Date: Mon, 23 Nov 2020 17:38:11 +0100 [thread overview]
Message-ID: <20201123163811.353444-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20201123163811.353444-1-narmstrong@baylibre.com>
This adds the MIPI DSI Host Pixel Clock, unlike AXG, the pixel clock can be different
from the VPU ENCL output clock to feed the DSI Host controller with a different clock rate.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 72 ++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 3 +-
2 files changed, 74 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 3cb8196c8e29..3dedf8408405 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -3658,6 +3658,66 @@ static struct clk_regmap g12a_hdmi_tx = {
},
};
+/* MIPI DSI Host Clocks */
+
+static const struct clk_hw *g12a_mipi_dsi_pxclk_parent_hws[] = {
+ &g12a_vid_pll.hw,
+ &g12a_gp0_pll.hw,
+ &g12a_hifi_pll.hw,
+ &g12a_mpll1.hw,
+ &g12a_fclk_div2.hw,
+ &g12a_fclk_div2p5.hw,
+ &g12a_fclk_div3.hw,
+ &g12a_fclk_div7.hw,
+};
+
+static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 12,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mipi_dsi_pxclk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
+ .num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mipi_dsi_pxclk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_mipi_dsi_pxclk_sel.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_mipi_dsi_pxclk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_MIPIDSI_PHY_CLK_CNTL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mipi_dsi_pxclk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_mipi_dsi_pxclk_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
/* HDMI Clocks */
static const struct clk_parent_data g12a_hdmi_parent_data[] = {
@@ -4403,6 +4463,9 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
[CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
[CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
[CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
+ [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
+ [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
+ [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4658,6 +4721,9 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
[CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
[CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
[CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
+ [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
+ [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
+ [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4904,6 +4970,9 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
[CLKID_NNA_CORE_CLK_SEL] = &sm1_nna_core_clk_sel.hw,
[CLKID_NNA_CORE_CLK_DIV] = &sm1_nna_core_clk_div.hw,
[CLKID_NNA_CORE_CLK] = &sm1_nna_core_clk.hw,
+ [CLKID_MIPI_DSI_PXCLK_SEL] = &g12a_mipi_dsi_pxclk_sel.hw,
+ [CLKID_MIPI_DSI_PXCLK_DIV] = &g12a_mipi_dsi_pxclk_div.hw,
+ [CLKID_MIPI_DSI_PXCLK] = &g12a_mipi_dsi_pxclk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -5151,6 +5220,9 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&sm1_nna_core_clk_sel,
&sm1_nna_core_clk_div,
&sm1_nna_core_clk,
+ &g12a_mipi_dsi_pxclk_sel,
+ &g12a_mipi_dsi_pxclk_div,
+ &g12a_mipi_dsi_pxclk,
};
static const struct reg_sequence g12a_init_regs[] = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index 69b6a69549c7..a97613df38b3 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -264,8 +264,9 @@
#define CLKID_NNA_AXI_CLK_DIV 263
#define CLKID_NNA_CORE_CLK_SEL 265
#define CLKID_NNA_CORE_CLK_DIV 266
+#define CLKID_MIPI_DSI_PXCLK_DIV 268
-#define NR_CLKS 268
+#define NR_CLKS 271
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.25.1
next prev parent reply other threads:[~2020-11-23 16:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-23 16:38 [PATCH 0/2] clk: meson: g12a: add MIPI DSI Host Pixel Clock Neil Armstrong
2020-11-23 16:38 ` [PATCH 1/2] dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings Neil Armstrong
2020-11-23 16:38 ` Neil Armstrong [this message]
2020-11-25 17:32 ` [PATCH 2/2] clk: meson: g12a: add MIPI DSI Host Pixel Clock Jerome Brunet
2020-11-26 14:08 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201123163811.353444-3-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).