[V4,1/3] sched/core: Move schedutil_cpu_util() to core.c
diff mbox series

Message ID f2eeee144a2e50540bff77d7bbe7351f154e2742.1606198885.git.viresh.kumar@linaro.org
State New, archived
Headers show
Series
  • cpufreq_cooling: Get effective CPU utilization from scheduler
Related show

Commit Message

Viresh Kumar Nov. 24, 2020, 6:26 a.m. UTC
There is nothing schedutil specific in schedutil_cpu_util(), move it to
core.c and define it only for CONFIG_SMP.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 kernel/sched/core.c              | 108 +++++++++++++++++++++++++++++++
 kernel/sched/cpufreq_schedutil.c | 106 ------------------------------
 kernel/sched/sched.h             |  12 +---
 3 files changed, 109 insertions(+), 117 deletions(-)

Comments

Rafael J. Wysocki Nov. 25, 2020, 3:36 p.m. UTC | #1
On Tue, Nov 24, 2020 at 7:26 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> There is nothing schedutil specific in schedutil_cpu_util(), move it to
> core.c and define it only for CONFIG_SMP.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

For the schedutil part:

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

> ---
>  kernel/sched/core.c              | 108 +++++++++++++++++++++++++++++++
>  kernel/sched/cpufreq_schedutil.c | 106 ------------------------------
>  kernel/sched/sched.h             |  12 +---
>  3 files changed, 109 insertions(+), 117 deletions(-)
>
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> index d2003a7d5ab5..b81265aec4a0 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -5117,6 +5117,114 @@ struct task_struct *idle_task(int cpu)
>         return cpu_rq(cpu)->idle;
>  }
>
> +#ifdef CONFIG_SMP
> +/*
> + * This function computes an effective utilization for the given CPU, to be
> + * used for frequency selection given the linear relation: f = u * f_max.
> + *
> + * The scheduler tracks the following metrics:
> + *
> + *   cpu_util_{cfs,rt,dl,irq}()
> + *   cpu_bw_dl()
> + *
> + * Where the cfs,rt and dl util numbers are tracked with the same metric and
> + * synchronized windows and are thus directly comparable.
> + *
> + * The cfs,rt,dl utilization are the running times measured with rq->clock_task
> + * which excludes things like IRQ and steal-time. These latter are then accrued
> + * in the irq utilization.
> + *
> + * The DL bandwidth number otoh is not a measured metric but a value computed
> + * based on the task model parameters and gives the minimal utilization
> + * required to meet deadlines.
> + */
> +unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
> +                                unsigned long max, enum schedutil_type type,
> +                                struct task_struct *p)
> +{
> +       unsigned long dl_util, util, irq;
> +       struct rq *rq = cpu_rq(cpu);
> +
> +       if (!uclamp_is_used() &&
> +           type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) {
> +               return max;
> +       }
> +
> +       /*
> +        * Early check to see if IRQ/steal time saturates the CPU, can be
> +        * because of inaccuracies in how we track these -- see
> +        * update_irq_load_avg().
> +        */
> +       irq = cpu_util_irq(rq);
> +       if (unlikely(irq >= max))
> +               return max;
> +
> +       /*
> +        * Because the time spend on RT/DL tasks is visible as 'lost' time to
> +        * CFS tasks and we use the same metric to track the effective
> +        * utilization (PELT windows are synchronized) we can directly add them
> +        * to obtain the CPU's actual utilization.
> +        *
> +        * CFS and RT utilization can be boosted or capped, depending on
> +        * utilization clamp constraints requested by currently RUNNABLE
> +        * tasks.
> +        * When there are no CFS RUNNABLE tasks, clamps are released and
> +        * frequency will be gracefully reduced with the utilization decay.
> +        */
> +       util = util_cfs + cpu_util_rt(rq);
> +       if (type == FREQUENCY_UTIL)
> +               util = uclamp_rq_util_with(rq, util, p);
> +
> +       dl_util = cpu_util_dl(rq);
> +
> +       /*
> +        * For frequency selection we do not make cpu_util_dl() a permanent part
> +        * of this sum because we want to use cpu_bw_dl() later on, but we need
> +        * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such
> +        * that we select f_max when there is no idle time.
> +        *
> +        * NOTE: numerical errors or stop class might cause us to not quite hit
> +        * saturation when we should -- something for later.
> +        */
> +       if (util + dl_util >= max)
> +               return max;
> +
> +       /*
> +        * OTOH, for energy computation we need the estimated running time, so
> +        * include util_dl and ignore dl_bw.
> +        */
> +       if (type == ENERGY_UTIL)
> +               util += dl_util;
> +
> +       /*
> +        * There is still idle time; further improve the number by using the
> +        * irq metric. Because IRQ/steal time is hidden from the task clock we
> +        * need to scale the task numbers:
> +        *
> +        *              max - irq
> +        *   U' = irq + --------- * U
> +        *                 max
> +        */
> +       util = scale_irq_capacity(util, irq, max);
> +       util += irq;
> +
> +       /*
> +        * Bandwidth required by DEADLINE must always be granted while, for
> +        * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism
> +        * to gracefully reduce the frequency when no tasks show up for longer
> +        * periods of time.
> +        *
> +        * Ideally we would like to set bw_dl as min/guaranteed freq and util +
> +        * bw_dl as requested freq. However, cpufreq is not yet ready for such
> +        * an interface. So, we only do the latter for now.
> +        */
> +       if (type == FREQUENCY_UTIL)
> +               util += cpu_bw_dl(rq);
> +
> +       return min(max, util);
> +}
> +#endif /* CONFIG_SMP */
> +
>  /**
>   * find_process_by_pid - find a process with a matching PID value.
>   * @pid: the pid in question.
> diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
> index e254745a82cb..2d44befb322b 100644
> --- a/kernel/sched/cpufreq_schedutil.c
> +++ b/kernel/sched/cpufreq_schedutil.c
> @@ -169,112 +169,6 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy,
>         return cpufreq_driver_resolve_freq(policy, freq);
>  }
>
> -/*
> - * This function computes an effective utilization for the given CPU, to be
> - * used for frequency selection given the linear relation: f = u * f_max.
> - *
> - * The scheduler tracks the following metrics:
> - *
> - *   cpu_util_{cfs,rt,dl,irq}()
> - *   cpu_bw_dl()
> - *
> - * Where the cfs,rt and dl util numbers are tracked with the same metric and
> - * synchronized windows and are thus directly comparable.
> - *
> - * The cfs,rt,dl utilization are the running times measured with rq->clock_task
> - * which excludes things like IRQ and steal-time. These latter are then accrued
> - * in the irq utilization.
> - *
> - * The DL bandwidth number otoh is not a measured metric but a value computed
> - * based on the task model parameters and gives the minimal utilization
> - * required to meet deadlines.
> - */
> -unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
> -                                unsigned long max, enum schedutil_type type,
> -                                struct task_struct *p)
> -{
> -       unsigned long dl_util, util, irq;
> -       struct rq *rq = cpu_rq(cpu);
> -
> -       if (!uclamp_is_used() &&
> -           type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) {
> -               return max;
> -       }
> -
> -       /*
> -        * Early check to see if IRQ/steal time saturates the CPU, can be
> -        * because of inaccuracies in how we track these -- see
> -        * update_irq_load_avg().
> -        */
> -       irq = cpu_util_irq(rq);
> -       if (unlikely(irq >= max))
> -               return max;
> -
> -       /*
> -        * Because the time spend on RT/DL tasks is visible as 'lost' time to
> -        * CFS tasks and we use the same metric to track the effective
> -        * utilization (PELT windows are synchronized) we can directly add them
> -        * to obtain the CPU's actual utilization.
> -        *
> -        * CFS and RT utilization can be boosted or capped, depending on
> -        * utilization clamp constraints requested by currently RUNNABLE
> -        * tasks.
> -        * When there are no CFS RUNNABLE tasks, clamps are released and
> -        * frequency will be gracefully reduced with the utilization decay.
> -        */
> -       util = util_cfs + cpu_util_rt(rq);
> -       if (type == FREQUENCY_UTIL)
> -               util = uclamp_rq_util_with(rq, util, p);
> -
> -       dl_util = cpu_util_dl(rq);
> -
> -       /*
> -        * For frequency selection we do not make cpu_util_dl() a permanent part
> -        * of this sum because we want to use cpu_bw_dl() later on, but we need
> -        * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such
> -        * that we select f_max when there is no idle time.
> -        *
> -        * NOTE: numerical errors or stop class might cause us to not quite hit
> -        * saturation when we should -- something for later.
> -        */
> -       if (util + dl_util >= max)
> -               return max;
> -
> -       /*
> -        * OTOH, for energy computation we need the estimated running time, so
> -        * include util_dl and ignore dl_bw.
> -        */
> -       if (type == ENERGY_UTIL)
> -               util += dl_util;
> -
> -       /*
> -        * There is still idle time; further improve the number by using the
> -        * irq metric. Because IRQ/steal time is hidden from the task clock we
> -        * need to scale the task numbers:
> -        *
> -        *              max - irq
> -        *   U' = irq + --------- * U
> -        *                 max
> -        */
> -       util = scale_irq_capacity(util, irq, max);
> -       util += irq;
> -
> -       /*
> -        * Bandwidth required by DEADLINE must always be granted while, for
> -        * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism
> -        * to gracefully reduce the frequency when no tasks show up for longer
> -        * periods of time.
> -        *
> -        * Ideally we would like to set bw_dl as min/guaranteed freq and util +
> -        * bw_dl as requested freq. However, cpufreq is not yet ready for such
> -        * an interface. So, we only do the latter for now.
> -        */
> -       if (type == FREQUENCY_UTIL)
> -               util += cpu_bw_dl(rq);
> -
> -       return min(max, util);
> -}
> -
>  static unsigned long sugov_get_util(struct sugov_cpu *sg_cpu)
>  {
>         struct rq *rq = cpu_rq(sg_cpu->cpu);
> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
> index df80bfcea92e..0db6bcf0881f 100644
> --- a/kernel/sched/sched.h
> +++ b/kernel/sched/sched.h
> @@ -2484,7 +2484,6 @@ static inline unsigned long capacity_orig_of(int cpu)
>  {
>         return cpu_rq(cpu)->cpu_capacity_orig;
>  }
> -#endif
>
>  /**
>   * enum schedutil_type - CPU utilization type
> @@ -2501,8 +2500,6 @@ enum schedutil_type {
>         ENERGY_UTIL,
>  };
>
> -#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL
> -
>  unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
>                                  unsigned long max, enum schedutil_type type,
>                                  struct task_struct *p);
> @@ -2533,14 +2530,7 @@ static inline unsigned long cpu_util_rt(struct rq *rq)
>  {
>         return READ_ONCE(rq->avg_rt.util_avg);
>  }
> -#else /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */
> -static inline unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
> -                                unsigned long max, enum schedutil_type type,
> -                                struct task_struct *p)
> -{
> -       return 0;
> -}
> -#endif /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */
> +#endif
>
>  #ifdef CONFIG_HAVE_SCHED_AVG_IRQ
>  static inline unsigned long cpu_util_irq(struct rq *rq)
> --
> 2.25.0.rc1.19.g042ed3e048af
>

Patch
diff mbox series

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index d2003a7d5ab5..b81265aec4a0 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5117,6 +5117,114 @@  struct task_struct *idle_task(int cpu)
 	return cpu_rq(cpu)->idle;
 }
 
+#ifdef CONFIG_SMP
+/*
+ * This function computes an effective utilization for the given CPU, to be
+ * used for frequency selection given the linear relation: f = u * f_max.
+ *
+ * The scheduler tracks the following metrics:
+ *
+ *   cpu_util_{cfs,rt,dl,irq}()
+ *   cpu_bw_dl()
+ *
+ * Where the cfs,rt and dl util numbers are tracked with the same metric and
+ * synchronized windows and are thus directly comparable.
+ *
+ * The cfs,rt,dl utilization are the running times measured with rq->clock_task
+ * which excludes things like IRQ and steal-time. These latter are then accrued
+ * in the irq utilization.
+ *
+ * The DL bandwidth number otoh is not a measured metric but a value computed
+ * based on the task model parameters and gives the minimal utilization
+ * required to meet deadlines.
+ */
+unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
+				 unsigned long max, enum schedutil_type type,
+				 struct task_struct *p)
+{
+	unsigned long dl_util, util, irq;
+	struct rq *rq = cpu_rq(cpu);
+
+	if (!uclamp_is_used() &&
+	    type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) {
+		return max;
+	}
+
+	/*
+	 * Early check to see if IRQ/steal time saturates the CPU, can be
+	 * because of inaccuracies in how we track these -- see
+	 * update_irq_load_avg().
+	 */
+	irq = cpu_util_irq(rq);
+	if (unlikely(irq >= max))
+		return max;
+
+	/*
+	 * Because the time spend on RT/DL tasks is visible as 'lost' time to
+	 * CFS tasks and we use the same metric to track the effective
+	 * utilization (PELT windows are synchronized) we can directly add them
+	 * to obtain the CPU's actual utilization.
+	 *
+	 * CFS and RT utilization can be boosted or capped, depending on
+	 * utilization clamp constraints requested by currently RUNNABLE
+	 * tasks.
+	 * When there are no CFS RUNNABLE tasks, clamps are released and
+	 * frequency will be gracefully reduced with the utilization decay.
+	 */
+	util = util_cfs + cpu_util_rt(rq);
+	if (type == FREQUENCY_UTIL)
+		util = uclamp_rq_util_with(rq, util, p);
+
+	dl_util = cpu_util_dl(rq);
+
+	/*
+	 * For frequency selection we do not make cpu_util_dl() a permanent part
+	 * of this sum because we want to use cpu_bw_dl() later on, but we need
+	 * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such
+	 * that we select f_max when there is no idle time.
+	 *
+	 * NOTE: numerical errors or stop class might cause us to not quite hit
+	 * saturation when we should -- something for later.
+	 */
+	if (util + dl_util >= max)
+		return max;
+
+	/*
+	 * OTOH, for energy computation we need the estimated running time, so
+	 * include util_dl and ignore dl_bw.
+	 */
+	if (type == ENERGY_UTIL)
+		util += dl_util;
+
+	/*
+	 * There is still idle time; further improve the number by using the
+	 * irq metric. Because IRQ/steal time is hidden from the task clock we
+	 * need to scale the task numbers:
+	 *
+	 *              max - irq
+	 *   U' = irq + --------- * U
+	 *                 max
+	 */
+	util = scale_irq_capacity(util, irq, max);
+	util += irq;
+
+	/*
+	 * Bandwidth required by DEADLINE must always be granted while, for
+	 * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism
+	 * to gracefully reduce the frequency when no tasks show up for longer
+	 * periods of time.
+	 *
+	 * Ideally we would like to set bw_dl as min/guaranteed freq and util +
+	 * bw_dl as requested freq. However, cpufreq is not yet ready for such
+	 * an interface. So, we only do the latter for now.
+	 */
+	if (type == FREQUENCY_UTIL)
+		util += cpu_bw_dl(rq);
+
+	return min(max, util);
+}
+#endif /* CONFIG_SMP */
+
 /**
  * find_process_by_pid - find a process with a matching PID value.
  * @pid: the pid in question.
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index e254745a82cb..2d44befb322b 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -169,112 +169,6 @@  static unsigned int get_next_freq(struct sugov_policy *sg_policy,
 	return cpufreq_driver_resolve_freq(policy, freq);
 }
 
-/*
- * This function computes an effective utilization for the given CPU, to be
- * used for frequency selection given the linear relation: f = u * f_max.
- *
- * The scheduler tracks the following metrics:
- *
- *   cpu_util_{cfs,rt,dl,irq}()
- *   cpu_bw_dl()
- *
- * Where the cfs,rt and dl util numbers are tracked with the same metric and
- * synchronized windows and are thus directly comparable.
- *
- * The cfs,rt,dl utilization are the running times measured with rq->clock_task
- * which excludes things like IRQ and steal-time. These latter are then accrued
- * in the irq utilization.
- *
- * The DL bandwidth number otoh is not a measured metric but a value computed
- * based on the task model parameters and gives the minimal utilization
- * required to meet deadlines.
- */
-unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
-				 unsigned long max, enum schedutil_type type,
-				 struct task_struct *p)
-{
-	unsigned long dl_util, util, irq;
-	struct rq *rq = cpu_rq(cpu);
-
-	if (!uclamp_is_used() &&
-	    type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) {
-		return max;
-	}
-
-	/*
-	 * Early check to see if IRQ/steal time saturates the CPU, can be
-	 * because of inaccuracies in how we track these -- see
-	 * update_irq_load_avg().
-	 */
-	irq = cpu_util_irq(rq);
-	if (unlikely(irq >= max))
-		return max;
-
-	/*
-	 * Because the time spend on RT/DL tasks is visible as 'lost' time to
-	 * CFS tasks and we use the same metric to track the effective
-	 * utilization (PELT windows are synchronized) we can directly add them
-	 * to obtain the CPU's actual utilization.
-	 *
-	 * CFS and RT utilization can be boosted or capped, depending on
-	 * utilization clamp constraints requested by currently RUNNABLE
-	 * tasks.
-	 * When there are no CFS RUNNABLE tasks, clamps are released and
-	 * frequency will be gracefully reduced with the utilization decay.
-	 */
-	util = util_cfs + cpu_util_rt(rq);
-	if (type == FREQUENCY_UTIL)
-		util = uclamp_rq_util_with(rq, util, p);
-
-	dl_util = cpu_util_dl(rq);
-
-	/*
-	 * For frequency selection we do not make cpu_util_dl() a permanent part
-	 * of this sum because we want to use cpu_bw_dl() later on, but we need
-	 * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such
-	 * that we select f_max when there is no idle time.
-	 *
-	 * NOTE: numerical errors or stop class might cause us to not quite hit
-	 * saturation when we should -- something for later.
-	 */
-	if (util + dl_util >= max)
-		return max;
-
-	/*
-	 * OTOH, for energy computation we need the estimated running time, so
-	 * include util_dl and ignore dl_bw.
-	 */
-	if (type == ENERGY_UTIL)
-		util += dl_util;
-
-	/*
-	 * There is still idle time; further improve the number by using the
-	 * irq metric. Because IRQ/steal time is hidden from the task clock we
-	 * need to scale the task numbers:
-	 *
-	 *              max - irq
-	 *   U' = irq + --------- * U
-	 *                 max
-	 */
-	util = scale_irq_capacity(util, irq, max);
-	util += irq;
-
-	/*
-	 * Bandwidth required by DEADLINE must always be granted while, for
-	 * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism
-	 * to gracefully reduce the frequency when no tasks show up for longer
-	 * periods of time.
-	 *
-	 * Ideally we would like to set bw_dl as min/guaranteed freq and util +
-	 * bw_dl as requested freq. However, cpufreq is not yet ready for such
-	 * an interface. So, we only do the latter for now.
-	 */
-	if (type == FREQUENCY_UTIL)
-		util += cpu_bw_dl(rq);
-
-	return min(max, util);
-}
-
 static unsigned long sugov_get_util(struct sugov_cpu *sg_cpu)
 {
 	struct rq *rq = cpu_rq(sg_cpu->cpu);
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index df80bfcea92e..0db6bcf0881f 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -2484,7 +2484,6 @@  static inline unsigned long capacity_orig_of(int cpu)
 {
 	return cpu_rq(cpu)->cpu_capacity_orig;
 }
-#endif
 
 /**
  * enum schedutil_type - CPU utilization type
@@ -2501,8 +2500,6 @@  enum schedutil_type {
 	ENERGY_UTIL,
 };
 
-#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL
-
 unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
 				 unsigned long max, enum schedutil_type type,
 				 struct task_struct *p);
@@ -2533,14 +2530,7 @@  static inline unsigned long cpu_util_rt(struct rq *rq)
 {
 	return READ_ONCE(rq->avg_rt.util_avg);
 }
-#else /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */
-static inline unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs,
-				 unsigned long max, enum schedutil_type type,
-				 struct task_struct *p)
-{
-	return 0;
-}
-#endif /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */
+#endif
 
 #ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 static inline unsigned long cpu_util_irq(struct rq *rq)