[thermal:,thermal/next] thermal: intel_pch_thermal: Add PCI ids for Lewisburg PCH.
diff mbox series

Message ID 160621059444.11115.12415047656928422652.tip-bot2@tip-bot2
State Accepted
Commit e78acf7efebff9184ad4add02b62a1f486a8cde8
Headers show
Series
  • [thermal:,thermal/next] thermal: intel_pch_thermal: Add PCI ids for Lewisburg PCH.
Related show

Commit Message

tip-bot2 for Linus Walleij Nov. 24, 2020, 9:36 a.m. UTC
The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     e78acf7efebff9184ad4add02b62a1f486a8cde8
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//e78acf7efebff9184ad4add02b62a1f486a8cde8
Author:        Andres Freund <andres@anarazel.de>
AuthorDate:    Fri, 13 Nov 2020 12:49:16 -08:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Sat, 14 Nov 2020 19:44:39 +01:00

thermal: intel_pch_thermal: Add PCI ids for Lewisburg PCH.

I noticed that I couldn't read the PCH temperature on my workstation
(C620 series chipset, w/ 2x Xeon Gold 5215 CPUs) directly, but had to go
through IPMI. Looking at the data sheet, it looks to me like the
existing intel PCH thermal driver should work without changes for
Lewisburg.

I suspect there's some other PCI IDs missing. But I hope somebody at
Intel would have an easier time figuring that out than I...

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Tushar Dave <tushar.n.dave@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/lkml/20200115184415.1726953-1-andres@anarazel.de/
Signed-off-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201113204916.1144907-1-andres@anarazel.de
---
 drivers/thermal/intel/intel_pch_thermal.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

Patch
diff mbox series

diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c
index 0a9e445..32e1b28 100644
--- a/drivers/thermal/intel/intel_pch_thermal.c
+++ b/drivers/thermal/intel/intel_pch_thermal.c
@@ -28,6 +28,7 @@ 
 #define PCH_THERMAL_DID_CNL_H	0xA379 /* CNL-H PCH */
 #define PCH_THERMAL_DID_CNL_LP	0x02F9 /* CNL-LP PCH */
 #define PCH_THERMAL_DID_CML_H	0X06F9 /* CML-H PCH */
+#define PCH_THERMAL_DID_LWB	0xA1B1 /* Lewisburg PCH */
 
 /* Wildcat Point-LP  PCH Thermal registers */
 #define WPT_TEMP	0x0000	/* Temperature */
@@ -340,6 +341,7 @@  enum board_ids {
 	board_skl,
 	board_cnl,
 	board_cml,
+	board_lwb,
 };
 
 static const struct board_info {
@@ -365,7 +367,11 @@  static const struct board_info {
 	[board_cml] = {
 		.name = "pch_cometlake",
 		.ops = &pch_dev_ops_wpt,
-	}
+	},
+	[board_lwb] = {
+		.name = "pch_lewisburg",
+		.ops = &pch_dev_ops_wpt,
+	},
 };
 
 static int intel_pch_thermal_probe(struct pci_dev *pdev,
@@ -479,6 +485,8 @@  static const struct pci_device_id intel_pch_thermal_id[] = {
 		.driver_data = board_cnl, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CML_H),
 		.driver_data = board_cml, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_LWB),
+		.driver_data = board_lwb, },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);