[next] scsi: pm8001: remove space in a debug message
diff mbox series

Message ID 20201124093828.307709-1-colin.king@canonical.com
State Accepted
Commit c6131854e28a50a7e3eaf7bc900d0780772b222b
Headers show
Series
  • [next] scsi: pm8001: remove space in a debug message
Related show

Commit Message

Colin King Nov. 24, 2020, 9:38 a.m. UTC
From: Colin Ian King <colin.king@canonical.com>

There are two words that need separating with a space in a 
pm8001_dbg message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Ewan D. Milne Nov. 24, 2020, 11:23 p.m. UTC | #1
On Tue, 2020-11-24 at 09:38 +0000, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> There are two words that need separating with a space in a 
> pm8001_dbg message. Fix it.
> 
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>  drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c
> b/drivers/scsi/pm8001/pm8001_hwi.c
> index 08d6cc9b50db..c8d4d87c5473 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info
> *pm8001_ha)
>  	regVal = pm8001_cr32(pm8001_ha, 2,
> GSM_WRITE_DATA_PARITY_CHECK);
>  	pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK,
> regVal3);
>  	pm8001_dbg(pm8001_ha, INIT,
> -		   "GSM 0x700048 - Write Data Parity Check Enableis set
> to = 0x%x\n",
> +		   "GSM 0x700048 - Write Data Parity Check Enable is
> set to = 0x%x\n",
>  		   pm8001_cr32(pm8001_ha, 2,
> GSM_WRITE_DATA_PARITY_CHECK));
>  
>  	/* step 13: bring the IOP and AAP1 out of reset */

Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Jinpu Wang Nov. 26, 2020, 2:01 p.m. UTC | #2
On Tue, Nov 24, 2020 at 10:38 AM Colin King <colin.king@canonical.com> wrote:
>
> From: Colin Ian King <colin.king@canonical.com>
>
> There are two words that need separating with a space in a
> pm8001_dbg message. Fix it.
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Thanks
> ---
>  drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
> index 08d6cc9b50db..c8d4d87c5473 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
>         regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
>         pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
>         pm8001_dbg(pm8001_ha, INIT,
> -                  "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n",
> +                  "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n",
>                    pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
>
>         /* step 13: bring the IOP and AAP1 out of reset */
> --
> 2.29.2
>
Martin K. Petersen Dec. 1, 2020, 4:35 a.m. UTC | #3
Colin,

> There are two words that need separating with a space in a 
> pm8001_dbg message. Fix it.

Applied to 5.11/scsi-staging, thanks!
Martin K. Petersen Dec. 8, 2020, 4:52 a.m. UTC | #4
On Tue, 24 Nov 2020 09:38:28 +0000, Colin King wrote:

> There are two words that need separating with a space in a
> pm8001_dbg message. Fix it.

Applied to 5.11/scsi-queue, thanks!

[1/1] scsi: pm8001: remove space in a debug message
      https://git.kernel.org/mkp/scsi/c/c6131854e28a

Patch
diff mbox series

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 08d6cc9b50db..c8d4d87c5473 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1031,7 +1031,7 @@  pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
 	regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
 	pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
 	pm8001_dbg(pm8001_ha, INIT,
-		   "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n",
+		   "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n",
 		   pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
 
 	/* step 13: bring the IOP and AAP1 out of reset */