linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Coiby Xu <coiby.xu@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
	linux-gpio@vger.kernel.org, Baq Domalaq <domalak@gmail.com>,
	Pedro Ribeiro <pedrib@gmail.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	stable@vger.kernel.org, linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v4] pinctrl: amd: remove debounce filter setting in IRQ type setting
Date: Wed, 25 Nov 2020 21:03:19 +0800	[thread overview]
Message-ID: <20201125130320.311059-1-coiby.xu@gmail.com> (raw)

Debounce filter setting should be independent from IRQ type setting
because according to the ACPI specs, there are separate arguments for
specifying debounce timeout and IRQ type in GpioIo() and GpioInt().

Together with commit 06abe8291bc31839950f7d0362d9979edc88a666
("pinctrl: amd: fix incorrect way to disable debounce filter") and
Andy's patch "gpiolib: acpi: Take into account debounce settings" [1],
this will fix broken touchpads for laptops whose BIOS set the
debounce timeout to a relatively large value. For example, the BIOS
of Lenovo AMD gaming laptops including Legion-5 15ARH05 (R7000),
Legion-5P (R7000P) and IdeaPad Gaming 3 15ARH05, set the debounce
timeout to 124.8ms. This led to the kernel receiving only ~7 HID
reports per second from the Synaptics touchpad
(MSFT0001:00 06CB:7F28).

Existing touchpads like [2][3] are not troubled by this bug because
the debounce timeout has been set to 0 by the BIOS before enabling
the debounce filter in setting IRQ type.

[1] https://lore.kernel.org/linux-gpio/20201111222008.39993-11-andriy.shevchenko@linux.intel.com/
[2] https://github.com/Syniurge/i2c-amd-mp2/issues/11#issuecomment-721331582
[3] https://forum.manjaro.org/t/random-short-touchpad-freezes/30832/28

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190
Link: https://lore.kernel.org/linux-gpio/CAHp75VcwiGREBUJ0A06EEw-SyabqYsp%2Bdqs2DpSrhaY-2GVdAA%40mail.gmail.com/
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
---
Changelog v4:
 - Note in the commit message that this patch depends on other two
   patches to fix the broken touchpad [Hans de Goede]
 - Add in the commit message that one more touchpad could be fixed.

Changelog v3:
 - Explain why the driver mistakenly took the slightly deviated value
   of debounce timeout in the commit message (patch 2/4) [Andy Shevchenko]
 - Explain why other touchpads are affected by the issue of setting debounce
   filter in IRQ type setting in the commit message (patch 4/4)

Changelog v2:
 - Message-Id to Link and grammar fixes for commit messages [Andy Shevchenko]
---
 drivers/pinctrl/pinctrl-amd.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 4aea3e05e8c6..899c16c17b6d 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -429,7 +429,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 		pin_reg &= ~BIT(LEVEL_TRIG_OFF);
 		pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
 		pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
-		pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
 		irq_set_handler_locked(d, handle_edge_irq);
 		break;

@@ -437,7 +436,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 		pin_reg &= ~BIT(LEVEL_TRIG_OFF);
 		pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
 		pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
-		pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
 		irq_set_handler_locked(d, handle_edge_irq);
 		break;

@@ -445,7 +443,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 		pin_reg &= ~BIT(LEVEL_TRIG_OFF);
 		pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
 		pin_reg |= BOTH_EADGE << ACTIVE_LEVEL_OFF;
-		pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
 		irq_set_handler_locked(d, handle_edge_irq);
 		break;

@@ -453,8 +450,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 		pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
 		pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
 		pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
-		pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
-		pin_reg |= DB_TYPE_PRESERVE_LOW_GLITCH << DB_CNTRL_OFF;
 		irq_set_handler_locked(d, handle_level_irq);
 		break;

@@ -462,8 +457,6 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 		pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
 		pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
 		pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
-		pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
-		pin_reg |= DB_TYPE_PRESERVE_HIGH_GLITCH << DB_CNTRL_OFF;
 		irq_set_handler_locked(d, handle_level_irq);
 		break;

--
2.29.2


             reply	other threads:[~2020-11-25 13:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-25 13:03 Coiby Xu [this message]
2020-11-25 13:24 ` [PATCH v4] pinctrl: amd: remove debounce filter setting in IRQ type setting Andy Shevchenko
2020-12-04 12:35   ` Coiby Xu
2020-12-04  9:03 ` Linus Walleij
2020-12-04 12:38   ` Coiby Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201125130320.311059-1-coiby.xu@gmail.com \
    --to=coiby.xu@gmail.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=domalak@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pedrib@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).