From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH 3/3] soc: qcom: llcc-qcom: Add support for SM8250 SoC
Date: Fri, 27 Nov 2020 17:41:27 +0530 [thread overview]
Message-ID: <20201127121127.158082-4-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20201127121127.158082-1-manivannan.sadhasivam@linaro.org>
SM8250 SoC uses LLCC IP version 2. In this version, the WRSC_EN register
needs to be written to enable the Write Sub Cache for each SCID. Hence,
use a dedicated "write_scid_en" member with predefined values and write
them for SoCs enabling the "llcc_v2" flag.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/soc/qcom/llcc-qcom.c | 40 ++++++++++++++++++++++++++++++
include/linux/soc/qcom/llcc-qcom.h | 1 +
2 files changed, 41 insertions(+)
diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 16b421608e9c..3ec4cdffa852 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -47,6 +47,7 @@
#define LLCC_TRP_SCID_DIS_CAP_ALLOC 0x21f00
#define LLCC_TRP_PCB_ACT 0x21f04
+#define LLCC_TRP_WRSC_EN 0x21f20
#define BANK_OFFSET_STRIDE 0x80000
@@ -73,6 +74,7 @@
* then the ways assigned to this client are not flushed on power
* collapse.
* @activate_on_init: Activate the slice immediately after it is programmed
+ * @write_scid_en: Bit enables write cache support for a given scid.
*/
struct llcc_slice_config {
u32 usecase_id;
@@ -87,12 +89,14 @@ struct llcc_slice_config {
bool dis_cap_alloc;
bool retain_on_pc;
bool activate_on_init;
+ bool write_scid_en;
};
struct qcom_llcc_config {
const struct llcc_slice_config *sct_data;
int size;
bool need_llcc_cfg;
+ bool llcc_v2;
};
static const struct llcc_slice_config sc7180_data[] = {
@@ -147,6 +151,25 @@ static const struct llcc_slice_config sm8150_data[] = {
{ LLCC_WRCACHE, 31, 128, 1, 1, 0xFFF, 0x0, 0, 0, 0, 0, 0 },
};
+static const struct llcc_slice_config sm8250_data[] = {
+ { LLCC_CPUSS, 1, 3072, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 1, 0 },
+ { LLCC_VIDSC0, 2, 512, 3, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+ { LLCC_AUDIO, 6, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 0, 0, 0 },
+ { LLCC_CMPT, 10, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 0, 0, 0 },
+ { LLCC_GPUHTW, 11, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+ { LLCC_GPU, 12, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 1 },
+ { LLCC_MMUHWT, 13, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
+ { LLCC_CMPTDMA, 15, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+ { LLCC_DISP, 16, 3072, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+ { LLCC_VIDFW, 17, 512, 1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+ { LLCC_AUDHW, 22, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+ { LLCC_NPU, 23, 3072, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+ { LLCC_WLHW, 24, 1024, 1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+ { LLCC_CVP, 28, 256, 3, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+ { LLCC_APTCM, 30, 128, 3, 0, 0x0, 0x3, 1, 0, 0, 1, 0, 0 },
+ { LLCC_WRCACHE, 31, 256, 1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
+};
+
static const struct qcom_llcc_config sc7180_cfg = {
.sct_data = sc7180_data,
.size = ARRAY_SIZE(sc7180_data),
@@ -164,6 +187,12 @@ static const struct qcom_llcc_config sm8150_cfg = {
.size = ARRAY_SIZE(sm8150_data),
};
+static const struct qcom_llcc_config sm8250_cfg = {
+ .sct_data = sm8250_data,
+ .size = ARRAY_SIZE(sm8250_data),
+ .llcc_v2 = true,
+};
+
static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
/**
@@ -413,6 +442,16 @@ static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config,
return ret;
}
+ if (cfg->llcc_v2) {
+ u32 wren;
+
+ wren = config->write_scid_en << config->slice_id;
+ ret = regmap_update_bits(drv_data->bcast_regmap, LLCC_TRP_WRSC_EN,
+ BIT(config->slice_id), wren);
+ if (ret)
+ return ret;
+ }
+
if (config->activate_on_init) {
desc.slice_id = config->slice_id;
ret = llcc_slice_activate(&desc);
@@ -559,6 +598,7 @@ static const struct of_device_id qcom_llcc_of_match[] = {
{ .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfg },
{ .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfg },
{ .compatible = "qcom,sm8150-llcc", .data = &sm8150_cfg },
+ { .compatible = "qcom,sm8250-llcc", .data = &sm8250_cfg },
{ }
};
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
index 3db6797ba6ff..85f18ae7692f 100644
--- a/include/linux/soc/qcom/llcc-qcom.h
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -29,6 +29,7 @@
#define LLCC_AUDHW 22
#define LLCC_NPU 23
#define LLCC_WLHW 24
+#define LLCC_CVP 28
#define LLCC_MODPE 29
#define LLCC_APTCM 30
#define LLCC_WRCACHE 31
--
2.25.1
next prev parent reply other threads:[~2020-11-27 12:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-27 12:11 [PATCH 0/3] Add LLCC support for SM8250 SoC Manivannan Sadhasivam
2020-11-27 12:11 ` [PATCH 1/3] dt-bindings: msm: Add LLCC for SM8250 Manivannan Sadhasivam
2020-12-08 19:46 ` Rob Herring
2020-11-27 12:11 ` [PATCH 2/3] arm64: dts: qcom: sm8250: Add support for LLCC block Manivannan Sadhasivam
2020-11-27 12:11 ` Manivannan Sadhasivam [this message]
2020-11-27 13:39 ` [PATCH 3/3] soc: qcom: llcc-qcom: Add support for SM8250 SoC Sai Prakash Ranjan
2020-11-27 16:07 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201127121127.158082-4-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).