From: Michal Simek <michal.simek@xilinx.com>
To: linux-kernel@vger.kernel.org, monstr@monstr.eu,
michal.simek@xilinx.com, git@xilinx.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jolly Shah <jolly.shah@xilinx.com>,
Manish Narani <manish.narani@xilinx.com>,
Rajan Vaja <rajan.vaja@xilinx.com>,
Ravi Patel <ravi.patel@xilinx.com>,
Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>,
Tejas Patel <tejas.patel@xilinx.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] firmware: xilinx: Fix kernel-doc warnings
Date: Tue, 1 Dec 2020 15:29:59 +0100 [thread overview]
Message-ID: <e606233d15bfdc594535dd34eb85472b42f61830.1606832997.git.michal.simek@xilinx.com> (raw)
kernel-doc is reporting some style issues. The patch is fixing them.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/firmware/xilinx/zynqmp.c | 46 ++++++++++++++++----------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index d6f12c89c6f3..ddf8e4e72584 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -585,13 +585,13 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data);
/**
* zynqmp_pm_set_sd_tapdelay() - Set tap delay for the SD device
*
- * @node_id Node ID of the device
- * @type Type of tap delay to set (input/output)
- * @value Value to set fot the tap delay
+ * @node_id: Node ID of the device
+ * @type: Type of tap delay to set (input/output)
+ * @value: Value to set fot the tap delay
*
* This function sets input/output tap delay for the SD device.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
{
@@ -603,12 +603,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
/**
* zynqmp_pm_sd_dll_reset() - Reset DLL logic
*
- * @node_id Node ID of the device
- * @type Reset type
+ * @node_id: Node ID of the device
+ * @type: Reset type
*
* This function resets DLL logic for the SD device.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
{
@@ -619,12 +619,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset);
/**
* zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs)
- * @index GGS register index
- * @value Register value to be written
+ * @index: GGS register index
+ * @value: Register value to be written
*
* This function writes value to GGS register.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_write_ggs(u32 index, u32 value)
{
@@ -635,12 +635,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_write_ggs);
/**
* zynqmp_pm_write_ggs() - PM API for reading global general storage (ggs)
- * @index GGS register index
- * @value Register value to be written
+ * @index: GGS register index
+ * @value: Register value to be written
*
* This function returns GGS register value.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_read_ggs(u32 index, u32 *value)
{
@@ -652,12 +652,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_read_ggs);
/**
* zynqmp_pm_write_pggs() - PM API for writing persistent global general
* storage (pggs)
- * @index PGGS register index
- * @value Register value to be written
+ * @index: PGGS register index
+ * @value: Register value to be written
*
* This function writes value to PGGS register.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_write_pggs(u32 index, u32 value)
{
@@ -669,12 +669,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_write_pggs);
/**
* zynqmp_pm_write_pggs() - PM API for reading persistent global general
* storage (pggs)
- * @index PGGS register index
- * @value Register value to be written
+ * @index: PGGS register index
+ * @value: Register value to be written
*
* This function returns PGGS register value.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_read_pggs(u32 index, u32 *value)
{
@@ -685,12 +685,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs);
/**
* zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status
- * @value Status value to be written
+ * @value: Status value to be written
*
* This function sets healthy bit value to indicate boot health status
* to firmware.
*
- * @return Returns status, either success or error+reason
+ * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_set_boot_health_status(u32 value)
{
@@ -899,10 +899,10 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_config);
* zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
* master has initialized its own power management
*
+ * Return: Returns status, either success or error+reason
+ *
* This API function is to be used for notify the power management controller
* about the completed power management initialization.
- *
- * Return: Returns status, either success or error+reason
*/
int zynqmp_pm_init_finalize(void)
{
--
2.29.2
next reply other threads:[~2020-12-01 14:31 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-01 14:29 Michal Simek [this message]
2020-12-09 14:11 ` [PATCH] firmware: xilinx: Fix kernel-doc warnings Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e606233d15bfdc594535dd34eb85472b42f61830.1606832997.git.michal.simek@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=git@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=jolly.shah@xilinx.com \
--cc=lakshmi.sai.krishna.potthuri@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manish.narani@xilinx.com \
--cc=monstr@monstr.eu \
--cc=rajan.vaja@xilinx.com \
--cc=ravi.patel@xilinx.com \
--cc=tejas.patel@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).