From: Tyrel Datwyler <tyreld@linux.ibm.com>
To: james.bottomley@hansenpartnership.com
Cc: martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
brking@linux.ibm.com, Tyrel Datwyler <tyreld@linux.ibm.com>,
Brian King <brking@linux.vnet.ibm.com>
Subject: [PATCH v2 03/17] ibmvfc: add Subordinate CRQ definitions
Date: Tue, 1 Dec 2020 18:53:15 -0600 [thread overview]
Message-ID: <20201202005329.4538-4-tyreld@linux.ibm.com> (raw)
In-Reply-To: <20201202005329.4538-1-tyreld@linux.ibm.com>
Subordinate Command Response Queues (Sub CRQ) are used in conjunction
with the primary CRQ when more than one queue is needed by the virtual
IO adapter. Recent phyp firmware versions support Sub CRQ's with ibmvfc
adapters. This feature is a prerequisite for supporting multiple
hardware backed submission queues in the vfc adapter.
The Sub CRQ command element differs from the standard CRQ in that it is
32bytes long as opposed to 16bytes for the latter. Despite this extra
16bytes the ibmvfc protocol will use the original CRQ command element
mapped to the first 16bytes of the Sub CRQ element initially.
Add definitions for the Sub CRQ command element and queue.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
drivers/scsi/ibmvscsi/ibmvfc.h | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index e095daada70e..b3cd35cbf067 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -656,6 +656,29 @@ struct ibmvfc_crq_queue {
dma_addr_t msg_token;
};
+struct ibmvfc_sub_crq {
+ struct ibmvfc_crq crq;
+ __be64 reserved[2];
+} __packed __aligned(8);
+
+struct ibmvfc_sub_queue {
+ struct ibmvfc_sub_crq *msgs;
+ dma_addr_t msg_token;
+ int size, cur;
+ struct ibmvfc_host *vhost;
+ unsigned long cookie;
+ unsigned long vios_cookie;
+ unsigned long hw_irq;
+ unsigned long irq;
+ unsigned long hwq_id;
+ char name[32];
+};
+
+struct ibmvfc_scsi_channels {
+ struct ibmvfc_sub_queue *scrqs;
+ unsigned int active_queues;
+};
+
enum ibmvfc_ae_link_state {
IBMVFC_AE_LS_LINK_UP = 0x01,
IBMVFC_AE_LS_LINK_BOUNCED = 0x02,
--
2.27.0
next prev parent reply other threads:[~2020-12-02 1:05 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 0:53 [PATCH v2 00/17] ibmvfc: initial MQ development Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 01/17] ibmvfc: add vhost fields and defaults for MQ enablement Tyrel Datwyler
2020-12-02 15:14 ` Brian King
2020-12-02 17:27 ` Tyrel Datwyler
2020-12-04 14:26 ` Brian King
2020-12-07 11:56 ` Hannes Reinecke
2020-12-08 22:37 ` Tyrel Datwyler
2020-12-17 11:49 ` John Garry
2020-12-02 0:53 ` [PATCH v2 02/17] ibmvfc: define hcall wrapper for registering a Sub-CRQ Tyrel Datwyler
2020-12-02 0:53 ` Tyrel Datwyler [this message]
2020-12-02 0:53 ` [PATCH v2 04/17] ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels Tyrel Datwyler
2020-12-02 15:25 ` Brian King
2020-12-02 22:23 ` Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 05/17] ibmvfc: add Sub-CRQ IRQ enable/disable routine Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 06/17] ibmvfc: add handlers to drain and complete Sub-CRQ responses Tyrel Datwyler
2020-12-02 15:46 ` Brian King
2020-12-02 22:28 ` Tyrel Datwyler
2020-12-02 15:56 ` Brian King
2020-12-02 0:53 ` [PATCH v2 07/17] ibmvfc: define Sub-CRQ interrupt handler routine Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 08/17] ibmvfc: map/request irq and register Sub-CRQ interrupt handler Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 09/17] ibmvfc: implement channel enquiry and setup commands Tyrel Datwyler
2020-12-02 15:51 ` Brian King
2020-12-02 0:53 ` [PATCH v2 10/17] ibmvfc: advertise client support for using hardware channels Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 11/17] ibmvfc: set and track hw queue in ibmvfc_event struct Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 12/17] ibmvfc: send commands down HW Sub-CRQ when channelized Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 13/17] ibmvfc: register Sub-CRQ handles with VIOS during channel setup Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 14/17] ibmvfc: add cancel mad initialization helper Tyrel Datwyler
2020-12-02 16:00 ` Brian King
2020-12-02 0:53 ` [PATCH v2 15/17] ibmvfc: send Cancel MAD down each hw scsi channel Tyrel Datwyler
2020-12-02 18:27 ` Brian King
2020-12-02 22:09 ` Tyrel Datwyler
2020-12-02 0:53 ` [PATCH v2 16/17] ibmvfc: enable MQ and set reasonable defaults Tyrel Datwyler
2020-12-02 18:31 ` Brian King
2020-12-02 0:53 ` [PATCH v2 17/17] ibmvfc: provide modules parameters for MQ settings Tyrel Datwyler
2020-12-02 18:40 ` Brian King
2020-12-02 22:17 ` Tyrel Datwyler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201202005329.4538-4-tyreld@linux.ibm.com \
--to=tyreld@linux.ibm.com \
--cc=brking@linux.ibm.com \
--cc=brking@linux.vnet.ibm.com \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).