From: Badhri Jagan Sridharan <badhri@google.com>
To: Guenter Roeck <linux@roeck-us.net>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Badhri Jagan Sridharan <badhri@google.com>
Subject: [PATCH v2] usb: typec: tcpm: Pass down negotiated rev to update retry count
Date: Tue, 1 Dec 2020 19:17:33 -0800 [thread overview]
Message-ID: <20201202031733.647808-1-badhri@google.com> (raw)
nRetryCount was updated from 3 to 2 between PD2.0 and PD3.0 spec.
nRetryCount in "Table 6-34 Counter parameters" of the PD 2.0
spec is set to 3, whereas, nRetryCount in "Table 6-59 Counter
parameters" is set to 2.
Pass down negotiated rev in pd_transmit so that low level chip
drivers can update the retry count accordingly before attempting
packet transmission.
This helps in passing "TEST.PD.PORT.ALL.02" of the
"Power Delivery Merged" test suite which was initially failing
with "The UUT did not retransmit the message nReryCount times"
In fusb302 & tcpci drivers, by default the driver sets the retry
count to 3 (Default for PD 2.0). Update this to 2,
if the negotiated rev is PD 3.0.
In wcove, since the retry count is intentionally set to max, leaving
it as is.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
Changes since V1:
-Squashed tcpm and client patches to one as suggested by Heikki.
---
drivers/usb/typec/tcpm/fusb302.c | 16 +++++++++++-----
drivers/usb/typec/tcpm/tcpci.c | 12 +++++++-----
drivers/usb/typec/tcpm/tcpm.c | 2 +-
drivers/usb/typec/tcpm/wcove.c | 3 ++-
include/linux/usb/tcpm.h | 2 +-
5 files changed, 22 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index 99562cc65ca6..ebc46b9f776c 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -343,12 +343,11 @@ static int fusb302_sw_reset(struct fusb302_chip *chip)
return ret;
}
-static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip)
+static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip, u8 retry_count)
{
int ret = 0;
- ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3,
- FUSB_REG_CONTROL3_N_RETRIES_3 |
+ ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, retry_count |
FUSB_REG_CONTROL3_AUTO_RETRY);
return ret;
@@ -399,7 +398,7 @@ static int tcpm_init(struct tcpc_dev *dev)
ret = fusb302_sw_reset(chip);
if (ret < 0)
return ret;
- ret = fusb302_enable_tx_auto_retries(chip);
+ ret = fusb302_enable_tx_auto_retries(chip, FUSB_REG_CONTROL3_N_RETRIES_3);
if (ret < 0)
return ret;
ret = fusb302_init_interrupt(chip);
@@ -1017,7 +1016,7 @@ static const char * const transmit_type_name[] = {
};
static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type,
- const struct pd_message *msg)
+ const struct pd_message *msg, unsigned int negotiated_rev)
{
struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
tcpc_dev);
@@ -1026,6 +1025,13 @@ static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type,
mutex_lock(&chip->lock);
switch (type) {
case TCPC_TX_SOP:
+ /* nRetryCount 3 in P2.0 spec, whereas 2 in PD3.0 spec */
+ ret = fusb302_enable_tx_auto_retries(chip, negotiated_rev > PD_REV20 ?
+ FUSB_REG_CONTROL3_N_RETRIES_2 :
+ FUSB_REG_CONTROL3_N_RETRIES_3);
+ if (ret < 0)
+ fusb302_log(chip, "Cannot update retry count ret=%d", ret);
+
ret = fusb302_pd_send_message(chip, msg);
if (ret < 0)
fusb302_log(chip,
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 12d983a75510..98a2455f779f 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -18,7 +18,8 @@
#include "tcpci.h"
-#define PD_RETRY_COUNT 3
+#define PD_RETRY_COUNT_DEFAULT 3
+#define PD_RETRY_COUNT_3_0_OR_HIGHER 2
#define AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV 3500
#define AUTO_DISCHARGE_PD_HEADROOM_MV 850
#define AUTO_DISCHARGE_PPS_HEADROOM_MV 1250
@@ -447,9 +448,8 @@ static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink)
return 0;
}
-static int tcpci_pd_transmit(struct tcpc_dev *tcpc,
- enum tcpm_transmit_type type,
- const struct pd_message *msg)
+static int tcpci_pd_transmit(struct tcpc_dev *tcpc, enum tcpm_transmit_type type,
+ const struct pd_message *msg, unsigned int negotiated_rev)
{
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
u16 header = msg ? le16_to_cpu(msg->header) : 0;
@@ -497,7 +497,9 @@ static int tcpci_pd_transmit(struct tcpc_dev *tcpc,
}
}
- reg = (PD_RETRY_COUNT << TCPC_TRANSMIT_RETRY_SHIFT) | (type << TCPC_TRANSMIT_TYPE_SHIFT);
+ /* nRetryCount is 3 in PD2.0 spec where 2 in PD3.0 spec */
+ reg = ((negotiated_rev > PD_REV20 ? PD_RETRY_COUNT_3_0_OR_HIGHER : PD_RETRY_COUNT_DEFAULT)
+ << TCPC_TRANSMIT_RETRY_SHIFT) | (type << TCPC_TRANSMIT_TYPE_SHIFT);
ret = regmap_write(tcpci->regmap, TCPC_TRANSMIT, reg);
if (ret < 0)
return ret;
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 3bbc1f10af49..c73bc3a8356a 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -667,7 +667,7 @@ static int tcpm_pd_transmit(struct tcpm_port *port,
tcpm_log(port, "PD TX, type: %#x", type);
reinit_completion(&port->tx_complete);
- ret = port->tcpc->pd_transmit(port->tcpc, type, msg);
+ ret = port->tcpc->pd_transmit(port->tcpc, type, msg, port->negotiated_rev);
if (ret < 0)
return ret;
diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c
index 9b745f432c91..79ae63950050 100644
--- a/drivers/usb/typec/tcpm/wcove.c
+++ b/drivers/usb/typec/tcpm/wcove.c
@@ -356,7 +356,8 @@ static int wcove_set_pd_rx(struct tcpc_dev *tcpc, bool on)
static int wcove_pd_transmit(struct tcpc_dev *tcpc,
enum tcpm_transmit_type type,
- const struct pd_message *msg)
+ const struct pd_message *msg,
+ unsigned int negotiated_rev)
{
struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
unsigned int info = 0;
diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h
index e68aaa12886f..efaedd7e8a18 100644
--- a/include/linux/usb/tcpm.h
+++ b/include/linux/usb/tcpm.h
@@ -121,7 +121,7 @@ struct tcpc_dev {
enum typec_cc_status cc);
int (*try_role)(struct tcpc_dev *dev, int role);
int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type,
- const struct pd_message *msg);
+ const struct pd_message *msg, unsigned int negotiated_rev);
int (*set_bist_data)(struct tcpc_dev *dev, bool on);
int (*enable_frs)(struct tcpc_dev *dev, bool enable);
void (*frs_sourcing_vbus)(struct tcpc_dev *dev);
--
2.29.2.576.ga3fc446d84-goog
next reply other threads:[~2020-12-02 3:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 3:17 Badhri Jagan Sridharan [this message]
2020-12-07 21:38 ` [PATCH v2] usb: typec: tcpm: Pass down negotiated rev to update retry count Guenter Roeck
2020-12-08 9:40 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201202031733.647808-1-badhri@google.com \
--to=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).