[v6,3/4] dt-bindings: mmc: Add phys, vmmc and vqmmc supplies for Keem Bay SOC
diff mbox series

Message ID 20201202150205.20150-4-muhammad.husaini.zulkifli@intel.com
State New, archived
Headers show
Series
  • mmc: sdhci-of-arasan: Enable UHS-1 support for Keem Bay SOC
Related show

Commit Message

Muhammad Husaini Zulkifli Dec. 2, 2020, 3:02 p.m. UTC
From: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>

Add DT bindings of vmmc and vqmmc supplies of regulator and phys for
the phandle of sd0_phy which contain additional property for
otap delay and sel_clk_buffer.

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
---
 Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
index 0753289fba84..0cbfdd840889 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -83,7 +83,7 @@  properties:
       - const: intel,keembay-sdhci-5.1-sd       # Intel Keem Bay SD controller
         description:
           For this device it is strongly suggested to include
-          arasan,soc-ctl-syscon.
+          arasan,soc-ctl-syscon, phys, vmmc-supply and vqmmc-supply.
       - const: intel,keembay-sdhci-5.1-sdio     # Intel Keem Bay SDIO controller
         description:
           For this device it is strongly suggested to include
@@ -299,5 +299,9 @@  examples:
           clock-names = "clk_xin", "clk_ahb";
           clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD0>,
                    <&scmi_clk KEEM_BAY_PSS_SD0>;
+          phys = <&sd0_phy>;
+          phy-names = "phy_arasan";
           arasan,soc-ctl-syscon = <&sd0_phy_syscon>;
+          vmmc-supply = <&reg_sd0_vcc>;
+          vqmmc-supply = <&reg_sd0_vqcc>;
     };