From: Michal Simek <michal.simek@xilinx.com>
To: linux-kernel@vger.kernel.org, monstr@monstr.eu,
michal.simek@xilinx.com, git@xilinx.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jolly Shah <jolly.shah@xilinx.com>,
Rajan Vaja <rajan.vaja@xilinx.com>,
Tejas Patel <tejas.patel@xilinx.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] firmware: xilinx: Add a blank line after function declaration
Date: Wed, 2 Dec 2020 08:38:49 +0100 [thread overview]
Message-ID: <7b6007e05f6c01214861a37f198cd5bee62a4d3e.1606894725.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1606894725.git.michal.simek@xilinx.com>
Fix all these issues which are also reported by checkpatch --strict.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
(no changes since v1)
include/linux/firmware/xlnx-zynqmp.h | 34 ++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 0db9005782d6..0e7e72650ed3 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -363,107 +363,132 @@ static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
return ERR_PTR(-ENODEV);
}
+
static inline int zynqmp_pm_get_api_version(u32 *version)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_get_chipid(u32 *idcode, u32 *version)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata,
u32 *out)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_enable(u32 clock_id)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_disable(u32 clock_id)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_pll_frac_mode(u32 clk_id, u32 mode)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_get_pll_frac_mode(u32 clk_id, u32 *mode)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_pll_frac_data(u32 clk_id, u32 data)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_get_pll_frac_data(u32 clk_id, u32 *data)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
const enum zynqmp_pm_reset_action assert_flag)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
u32 *status)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_init_finalize(void)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_suspend_mode(u32 mode)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_request_node(const u32 node, const u32 capabilities,
const u32 qos,
const enum zynqmp_pm_request_ack ack)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_release_node(const u32 node)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_requirement(const u32 node,
const u32 capabilities,
const u32 qos,
@@ -471,39 +496,48 @@ static inline int zynqmp_pm_set_requirement(const u32 node,
{
return -ENODEV;
}
+
static inline int zynqmp_pm_aes_engine(const u64 address, u32 *out)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_fpga_load(const u64 address, const u32 size,
const u32 flags)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_fpga_get_status(u32 *value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_write_ggs(u32 index, u32 value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_read_ggs(u32 index, u32 *value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_write_pggs(u32 index, u32 value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_read_pggs(u32 index, u32 *value)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype)
{
return -ENODEV;
}
+
static inline int zynqmp_pm_set_boot_health_status(u32 value)
{
return -ENODEV;
--
2.29.2
next prev parent reply other threads:[~2020-12-02 7:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 7:38 [PATCH v2 0/3] firmware: xilinx: Clean up series Michal Simek
2020-12-02 7:38 ` [PATCH v2 1/3] firmware: xilinx: Remove additional newline Michal Simek
2020-12-02 7:38 ` Michal Simek [this message]
2020-12-02 7:38 ` [PATCH v2 3/3] firmware: xilinx: Properly align function parameter Michal Simek
2020-12-09 14:03 ` [PATCH v2 0/3] firmware: xilinx: Clean up series Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7b6007e05f6c01214861a37f198cd5bee62a4d3e.1606894725.git.michal.simek@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=git@xilinx.com \
--cc=gregkh@linuxfoundation.org \
--cc=jolly.shah@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=monstr@monstr.eu \
--cc=rajan.vaja@xilinx.com \
--cc=tejas.patel@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).