[12/29] bus: mhi: core: Skip RDDM download for unknown execution environment
diff mbox series

Message ID 20201202094159.107075-13-manivannan.sadhasivam@linaro.org
State New, archived
Headers show
Series
  • MHI changes for v5.11
Related show

Commit Message

Manivannan Sadhasivam Dec. 2, 2020, 9:41 a.m. UTC
From: Bhaumik Bhatt <bbhatt@codeaurora.org>

If MHI is unable to determine the execution environment during
the panic path, host must skip the RDDM download. This can happen
if the BHI offset read or the BHI_EXECENV register read fails
indicating that the underlying transport is unresponsive. Hence,
there is no need to trigger an RDDM using SYSERR or request an
SOC reset.

Suggested-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/core/boot.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

Patch
diff mbox series

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 16244cc8fbe7..6f0cfb9922b4 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -92,6 +92,9 @@  static int __mhi_download_rddm_in_panic(struct mhi_controller *mhi_cntrl)
 	 * image download completion.
 	 */
 	ee = mhi_get_exec_env(mhi_cntrl);
+	if (ee == MHI_EE_MAX)
+		goto error_exit_rddm;
+
 	if (ee != MHI_EE_RDDM) {
 		dev_dbg(dev, "Trigger device into RDDM mode using SYS ERR\n");
 		mhi_set_mhi_state(mhi_cntrl, MHI_STATE_SYS_ERR);
@@ -139,10 +142,12 @@  static int __mhi_download_rddm_in_panic(struct mhi_controller *mhi_cntrl)
 	ee = mhi_get_exec_env(mhi_cntrl);
 	ret = mhi_read_reg(mhi_cntrl, base, BHIE_RXVECSTATUS_OFFS, &rx_status);
 
-	dev_err(dev, "Did not complete RDDM transfer\n");
-	dev_err(dev, "Current EE: %s\n", TO_MHI_EXEC_STR(ee));
 	dev_err(dev, "RXVEC_STATUS: 0x%x\n", rx_status);
 
+error_exit_rddm:
+	dev_err(dev, "RDDM transfer failed. Current EE: %s\n",
+		TO_MHI_EXEC_STR(ee));
+
 	return -EIO;
 }