From: Michal Simek <michal.simek@xilinx.com>
To: linux-kernel@vger.kernel.org, monstr@monstr.eu,
michal.simek@xilinx.com, git@xilinx.com
Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Rajan Vaja <rajan.vaja@xilinx.com>,
Rob Herring <robh+dt@kernel.org>,
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/12] arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
Date: Wed, 2 Dec 2020 15:06:02 +0100 [thread overview]
Message-ID: <679a09c15babcc6c209e5e6466a9fa76d1e2c271.1606917949.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1606917949.git.michal.simek@xilinx.com>
Enable si5341 driver is the main chip for providing preprogrammed clocks
for the whole platform.
# cat /sys/kernel/debug/clk/clk_summary
...
refhdmi 1 1 0 114285000 0 0 50000
xtal_0 0 0 0 114285000 0 0 50000
pll_0 0 0 0 40731174000000 0 0 50000
clk1_0 0 0 0 27000000 0 0 50000
clk0_0 0 0 0 27000000 0 0 50000
ref48M 1 2 0 48000000 0 0 50000
si5341 0 4 0 14000000 0 0 50000
clock-generator.N4 0 0 0 0 0 0 50000
clock-generator.N3 0 1 0 733260000 0 0 50000
clock-generator.9 0 1 0 33330000 0 0 50000
clock-generator.N2 0 1 0 104000000 0 0 50000
clock-generator.2 0 1 0 26000000 0 0 50000
clock-generator.N1 0 2 0 594000000 0 0 50000
clock-generator.7 0 1 0 74250000 0 0 50000
clock-generator.0 0 1 0 27000000 0 0 50000
clock-generator.N0 0 4 0 1000000000 0 0 50000
clock-generator.8 0 0 0 0 0 0 50000
clock-generator.6 0 1 0 125000000 0 0 50000
clock-generator.5 0 1 0 100000000 0 0 50000
clock-generator.4 0 1 0 100000000 0 0 50000
clock-generator.3 0 1 0 125000000 0 0 50000
clock-generator.1 0 0 0 0 0 0 50000
...
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 56 ++++++++++++++++++-
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 45 +++++++++++++++
.../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 46 ++++++++++++++-
3 files changed, 145 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 5ff7ab665374..68c2ad30d62d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -133,6 +133,13 @@ ina226-u75 {
io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
};
+ /* 48MHz reference crystal */
+ ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
refhdmi: refhdmi {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -489,9 +496,56 @@ i2c@1 {
#size-cells = <0>;
reg = <1>;
si5341: clock-generator@36 { /* SI5341 - u69 */
+ compatible = "silabs,si5341";
reg = <0x36>;
- };
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ref48>;
+ clock-names = "xtal";
+ clock-output-names = "si5341";
+ si5341_0: out@0 {
+ /* refclk0 for PS-GT, used for DP */
+ reg = <0>;
+ always-on;
+ };
+ si5341_2: out@2 {
+ /* refclk2 for PS-GT, used for USB3 */
+ reg = <2>;
+ always-on;
+ };
+ si5341_3: out@3 {
+ /* refclk3 for PS-GT, used for SATA */
+ reg = <3>;
+ always-on;
+ };
+ si5341_4: out@4 {
+ /* refclk4 for PS-GT, used for PCIE slot */
+ reg = <4>;
+ always-on;
+ };
+ si5341_5: out@5 {
+ /* refclk5 for PS-GT, used for PCIE */
+ reg = <5>;
+ always-on;
+ };
+ si5341_6: out@6 {
+ /* refclk6 PL CLK125 */
+ reg = <6>;
+ always-on;
+ };
+ si5341_7: out@7 {
+ /* refclk7 PL CLK74 */
+ reg = <7>;
+ always-on;
+ };
+ si5341_9: out@9 {
+ /* refclk9 used for PS_REF_CLK 33.3 MHz */
+ reg = <9>;
+ always-on;
+ };
+ };
};
i2c@2 {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 7910ac125101..a29ff20090ce 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -133,6 +133,13 @@ ina226-u75 {
io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
};
+ /* 48MHz reference crystal */
+ ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
refhdmi: refhdmi {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -488,7 +495,45 @@ i2c@1 {
#size-cells = <0>;
reg = <1>;
si5341: clock-generator@36 { /* SI5341 - u69 */
+ compatible = "silabs,si5341";
reg = <0x36>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ref48>;
+ clock-names = "xtal";
+ clock-output-names = "si5341";
+
+ si5341_0: out@0 {
+ /* refclk0 for PS-GT, used for DP */
+ reg = <0>;
+ always-on;
+ };
+ si5341_2: out@2 {
+ /* refclk2 for PS-GT, used for USB3 */
+ reg = <2>;
+ always-on;
+ };
+ si5341_3: out@3 {
+ /* refclk3 for PS-GT, used for SATA */
+ reg = <3>;
+ always-on;
+ };
+ si5341_6: out@6 {
+ /* refclk6 PL CLK125 */
+ reg = <6>;
+ always-on;
+ };
+ si5341_7: out@7 {
+ /* refclk7 PL CLK74 */
+ reg = <7>;
+ always-on;
+ };
+ si5341_9: out@9 {
+ /* refclk9 used for PS_REF_CLK 33.3 MHz */
+ reg = <9>;
+ always-on;
+ };
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index d9a8fdbbcae8..92b3cee62d11 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -116,6 +116,13 @@ ina226-u79 {
compatible = "iio-hwmon";
io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
};
+
+ /* 48MHz reference crystal */
+ ref48: ref48M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
};
&dcc {
@@ -374,9 +381,46 @@ i2c@1 {
#size-cells = <0>;
reg = <1>;
si5341: clock-generator@36 { /* SI5341 - u46 */
+ compatible = "silabs,si5341";
reg = <0x36>;
+ #clock-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&ref48>;
+ clock-names = "xtal";
+ clock-output-names = "si5341";
+
+ si5341_0: out@0 {
+ /* refclk0 for PS-GT, used for DP */
+ reg = <0>;
+ always-on;
+ };
+ si5341_2: out@2 {
+ /* refclk2 for PS-GT, used for USB3 */
+ reg = <2>;
+ always-on;
+ };
+ si5341_3: out@3 {
+ /* refclk3 for PS-GT, used for SATA */
+ reg = <3>;
+ always-on;
+ };
+ si5341_5: out@5 {
+ /* refclk5 PL CLK100 */
+ reg = <5>;
+ always-on;
+ };
+ si5341_6: out@6 {
+ /* refclk6 PL CLK125 */
+ reg = <6>;
+ always-on;
+ };
+ si5341_9: out@9 {
+ /* refclk9 used for PS_REF_CLK 33.3 MHz */
+ reg = <9>;
+ always-on;
+ };
};
-
};
i2c@2 {
#address-cells = <1>;
--
2.29.2
next prev parent reply other threads:[~2020-12-02 14:07 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 14:05 [PATCH 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Michal Simek
2020-12-02 14:06 ` [PATCH 01/12] arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111 Michal Simek
2020-12-02 14:06 ` [PATCH 02/12] arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106 Michal Simek
2020-12-02 14:06 ` Michal Simek [this message]
2020-12-02 14:06 ` [PATCH 04/12] arm64: dts: zynqmp: Enable and wire reset controller Michal Simek
2020-12-06 22:38 ` Laurent Pinchart
2020-12-07 9:32 ` Michal Simek
2021-01-21 10:10 ` Michal Simek
2020-12-02 14:06 ` [PATCH 05/12] arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106 Michal Simek
2020-12-02 14:06 ` [PATCH 06/12] arm64: dts: zynqmp: Add label for zynqmp_ipi Michal Simek
2020-12-06 22:46 ` Laurent Pinchart
2020-12-06 22:48 ` Laurent Pinchart
2020-12-07 9:43 ` Michal Simek
2020-12-07 9:39 ` Michal Simek
2020-12-07 22:16 ` Laurent Pinchart
2020-12-08 7:26 ` Michal Simek
2021-01-21 22:29 ` Laurent Pinchart
2021-01-22 9:00 ` Michal Simek
2020-12-02 14:06 ` [PATCH 07/12] arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis Michal Simek
2020-12-02 14:06 ` [PATCH 08/12] arm64: dts: zynqmp: Wire arasan nand controller Michal Simek
2020-12-02 14:06 ` [PATCH 09/12] arm64: dts: zynqmp: Wire zynqmp qspi controller Michal Simek
2020-12-02 14:06 ` [PATCH 10/12] arm64: dts: zynqmp: Add missing lpd watchdog node Michal Simek
2020-12-02 14:06 ` [PATCH 11/12] arm64: dts: zynqmp: Add missing iommu IDs Michal Simek
2020-12-02 14:06 ` [PATCH 12/12] arm64: dts: zynqmp: Add description for zcu104 revC Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=679a09c15babcc6c209e5e6466a9fa76d1e2c271.1606917949.git.michal.simek@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=anurag.kumar.vulisha@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=monstr@monstr.eu \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=venkatesh.abbarapu@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).