From: Michal Simek <michal.simek@xilinx.com>
To: linux-kernel@vger.kernel.org, monstr@monstr.eu,
michal.simek@xilinx.com, git@xilinx.com
Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Rajan Vaja <rajan.vaja@xilinx.com>,
Rob Herring <robh+dt@kernel.org>,
Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/12] arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
Date: Wed, 2 Dec 2020 15:06:06 +0100 [thread overview]
Message-ID: <67301f9bf40028a223ebf81a9dfd35deb4098e11.1606917949.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1606917949.git.michal.simek@xilinx.com>
Add missing xlnx,mio-bank property to sdhci nodes. Also add properties with
0 value to have it listed in case that files are copied to different
projects where default case doesn't need to be handled in the same way.
That's why explicitly list them too.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Based on dt binding fix:
https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xilinx.com
---
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 1 +
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 1 +
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 1 +
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 1 +
5 files changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 68ecd0f7b2f2..71ebcaadb7c8 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -233,11 +233,13 @@ &sdhci0 {
status = "okay";
no-1-8-v;
disable-wp;
+ xlnx,mio-bank = <0>;
};
&sdhci1 {
status = "okay";
bus-width = <0x4>;
+ xlnx,mio-bank = <0>;
non-removable;
disable-wp;
cap-power-off-card;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index d92698ffbf8c..9abd10f6785a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -694,6 +694,7 @@ &sata {
&sdhci1 {
status = "okay";
no-1-8-v;
+ xlnx,mio-bank = <1>;
};
&uart0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index 5e2be9abc175..8ede619fea52 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -203,6 +203,7 @@ &sata {
&sdhci1 {
status = "okay";
no-1-8-v;
+ xlnx,mio-bank = <1>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 4ec6715abab7..d60a30787022 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -689,6 +689,7 @@ &sata {
&sdhci1 {
status = "okay";
no-1-8-v;
+ xlnx,mio-bank = <1>;
};
&uart0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 2969c4b71384..758de05c4a4b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -572,6 +572,7 @@ &sata {
&sdhci1 {
status = "okay";
no-1-8-v;
+ xlnx,mio-bank = <1>;
};
&uart0 {
--
2.29.2
next prev parent reply other threads:[~2020-12-02 14:07 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 14:05 [PATCH 00/12] arm64: dts: zynqmp: DT updates to match latest drivers Michal Simek
2020-12-02 14:06 ` [PATCH 01/12] arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111 Michal Simek
2020-12-02 14:06 ` [PATCH 02/12] arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106 Michal Simek
2020-12-02 14:06 ` [PATCH 03/12] arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111 Michal Simek
2020-12-02 14:06 ` [PATCH 04/12] arm64: dts: zynqmp: Enable and wire reset controller Michal Simek
2020-12-06 22:38 ` Laurent Pinchart
2020-12-07 9:32 ` Michal Simek
2021-01-21 10:10 ` Michal Simek
2020-12-02 14:06 ` [PATCH 05/12] arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106 Michal Simek
2020-12-02 14:06 ` [PATCH 06/12] arm64: dts: zynqmp: Add label for zynqmp_ipi Michal Simek
2020-12-06 22:46 ` Laurent Pinchart
2020-12-06 22:48 ` Laurent Pinchart
2020-12-07 9:43 ` Michal Simek
2020-12-07 9:39 ` Michal Simek
2020-12-07 22:16 ` Laurent Pinchart
2020-12-08 7:26 ` Michal Simek
2021-01-21 22:29 ` Laurent Pinchart
2021-01-22 9:00 ` Michal Simek
2020-12-02 14:06 ` Michal Simek [this message]
2020-12-02 14:06 ` [PATCH 08/12] arm64: dts: zynqmp: Wire arasan nand controller Michal Simek
2020-12-02 14:06 ` [PATCH 09/12] arm64: dts: zynqmp: Wire zynqmp qspi controller Michal Simek
2020-12-02 14:06 ` [PATCH 10/12] arm64: dts: zynqmp: Add missing lpd watchdog node Michal Simek
2020-12-02 14:06 ` [PATCH 11/12] arm64: dts: zynqmp: Add missing iommu IDs Michal Simek
2020-12-02 14:06 ` [PATCH 12/12] arm64: dts: zynqmp: Add description for zcu104 revC Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=67301f9bf40028a223ebf81a9dfd35deb4098e11.1606917949.git.michal.simek@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=anurag.kumar.vulisha@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=monstr@monstr.eu \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=venkatesh.abbarapu@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).