linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
To: Li Yang <leoyang.li@nxp.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: Zhao Qiang <qiang.zhao@nxp.com>,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	Rasmus Villemoes <rasmus.villemoes@prevas.dk>,
	netdev@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 02/20] ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pram
Date: Sat,  5 Dec 2020 20:17:25 +0100	[thread overview]
Message-ID: <20201205191744.7847-3-rasmus.villemoes@prevas.dk> (raw)
In-Reply-To: <20201205191744.7847-1-rasmus.villemoes@prevas.dk>

Table 8-53 in the QUICC Engine Reference manual shows definitions of
fields up to a size of 192 bytes, not just 128. But in table 8-111,
one does find the text

  Base Address of the Global Transmitter Parameter RAM Page. [...]
  The user needs to allocate 128 bytes for this page. The address must
  be aligned to the page size.

I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual;
they both have this inconsistency (and the table numbers are the
same).

Adding a bit of debug printing, on my board the struct
ucc_geth_tx_global_pram is allocated at offset 0x880, while
the (opaque) ucc_geth_thread_data_tx gets allocated immediately
afterwards, at 0x900. So whatever the engine writes into the thread
data overlaps with the tail of the global tx pram (and devmem says
that something does get written during a simple ping).

I haven't observed any failure that could be attributed to this, but
it seems to be the kind of thing that would be extremely hard to
debug. So extend the struct definition so that we do allocate 192
bytes.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/net/ethernet/freescale/ucc_geth.h | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h
index 3fe903972195..c80bed2c995c 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.h
+++ b/drivers/net/ethernet/freescale/ucc_geth.h
@@ -575,7 +575,14 @@ struct ucc_geth_tx_global_pram {
 	u32 vtagtable[0x8];	/* 8 4-byte VLAN tags */
 	u32 tqptr;		/* a base pointer to the Tx Queues Memory
 				   Region */
-	u8 res2[0x80 - 0x74];
+	u8 res2[0x78 - 0x74];
+	u64 snums_en;
+	u32 l2l3baseptr;	/* top byte consists of a few other bit fields */
+
+	u16 mtu[8];
+	u8 res3[0xa8 - 0x94];
+	u32 wrrtablebase;	/* top byte is reserved */
+	u8 res4[0xc0 - 0xac];
 } __packed;
 
 /* structure representing Extended Filtering Global Parameters in PRAM */
-- 
2.23.0


  parent reply	other threads:[~2020-12-05 19:19 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-05 19:17 [PATCH 00/20] ethernet: ucc_geth: assorted fixes and simplifications Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 01/20] ethernet: ucc_geth: set dev->max_mtu to 1518 Rasmus Villemoes
2020-12-10  1:25   ` Andrew Lunn
2021-01-05 14:17     ` Joakim Tjernlund
2021-01-05 14:33       ` Andrew Lunn
2021-01-05 14:44         ` Joakim Tjernlund
2021-01-05 14:54           ` Andrew Lunn
2020-12-05 19:17 ` Rasmus Villemoes [this message]
2020-12-08 19:14   ` [PATCH 02/20] ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pram Li Yang
2020-12-08 20:12     ` Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 03/20] ethernet: ucc_geth: remove unused read of temoder field Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 04/20] soc: fsl: qe: make cpm_muram_offset take a const void* argument Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 05/20] soc: fsl: qe: store muram_vbase as a void pointer instead of u8 Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 06/20] soc: fsl: qe: add cpm_muram_free_addr() helper Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 07/20] ethernet: ucc_geth: use qe_muram_free_addr() Rasmus Villemoes
2020-12-10  1:36   ` Andrew Lunn
2020-12-05 19:17 ` [PATCH 08/20] ethernet: ucc_geth: remove unnecessary memset_io() calls Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 09/20] ethernet: ucc_geth: replace kmalloc+memset by kzalloc Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 10/20] ethernet: ucc_geth: remove {rx,tx}_glbl_pram_offset from struct ucc_geth_private Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 11/20] ethernet: ucc_geth: fix use-after-free in ucc_geth_remove() Rasmus Villemoes
2020-12-05 20:48   ` Jakub Kicinski
2020-12-05 21:04     ` Rasmus Villemoes
2020-12-05 21:19       ` Jakub Kicinski
2020-12-05 21:35         ` Rasmus Villemoes
2020-12-05 21:50       ` Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 12/20] ethernet: ucc_geth: factor out parsing of {rx,tx}-clock{,-name} properties Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 13/20] ethernet: ucc_geth: constify ugeth_primary_info Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 14/20] ethernet: ucc_geth: don't statically allocate eight ucc_geth_info Rasmus Villemoes
2020-12-08 15:13   ` Christophe Leroy
2020-12-08 21:17     ` Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 15/20] ethernet: ucc_geth: use UCC_GETH_{RX,TX}_BD_RING_ALIGNMENT macros directly Rasmus Villemoes
2020-12-08 15:14   ` [PATCH 15/20] ethernet: ucc_geth: use UCC_GETH_{RX, TX}_BD_RING_ALIGNMENT " Christophe Leroy
2020-12-05 19:17 ` [PATCH 16/20] ethernet: ucc_geth: remove bd_mem_part and all associated code Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 17/20] ethernet: ucc_geth: replace kmalloc_array()+for loop by kcalloc() Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 18/20] ethernet: ucc_geth: add helper to replace repeated switch statements Rasmus Villemoes
2020-12-08 15:21   ` Christophe Leroy
2020-12-08 20:55     ` Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 19/20] ethernet: ucc_geth: inform the compiler that numQueues is always 1 Rasmus Villemoes
2020-12-05 19:17 ` [PATCH 20/20] ethernet: ucc_geth: simplify rx/tx allocations Rasmus Villemoes
2020-12-05 20:53 ` [PATCH 00/20] ethernet: ucc_geth: assorted fixes and simplifications Jakub Kicinski
2020-12-05 21:11   ` Rasmus Villemoes
2020-12-05 21:27     ` Jakub Kicinski
2020-12-05 21:36       ` Rasmus Villemoes
2020-12-10  7:52       ` Rasmus Villemoes
2020-12-08  3:07     ` Qiang Zhao
2020-12-08  8:13       ` Rasmus Villemoes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201205191744.7847-3-rasmus.villemoes@prevas.dk \
    --to=rasmus.villemoes@prevas.dk \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=netdev@vger.kernel.org \
    --cc=qiang.zhao@nxp.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).