From: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
rjliao@codeaurora.org, hbandi@codeaurora.org,
abhishekpandit@chromium.org,
Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Subject: [PATCH v4] Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC
Date: Tue, 8 Dec 2020 17:25:29 +0530 [thread overview]
Message-ID: <1607428529-26629-1-git-send-email-gubbaven@codeaurora.org> (raw)
Add support to read FW build version from debugfs node.
This info can be read from
/sys/kernel/debug/bluetooth/hci0/firmware_info
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
drivers/bluetooth/btqca.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btqca.h | 1 +
2 files changed, 55 insertions(+)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index f85a55a..f6256a3 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -94,6 +94,53 @@ int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
}
EXPORT_SYMBOL_GPL(qca_read_soc_version);
+static int qca_read_fw_build_info(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ struct edl_event_hdr *edl;
+ char cmd, build_label[QCA_FW_BUILD_VER_LEN];
+ int build_lbl_len, err = 0;
+
+ bt_dev_dbg(hdev, "QCA read fw build info");
+
+ cmd = EDL_GET_BUILD_INFO_CMD;
+ skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+ &cmd, 0, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Reading QCA fw build info failed (%d)",
+ err);
+ return err;
+ }
+
+ edl = (struct edl_event_hdr *)(skb->data);
+ if (!edl) {
+ bt_dev_err(hdev, "QCA read fw build info with no header");
+ err = -EILSEQ;
+ goto out;
+ }
+
+ if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+ edl->rtype != EDL_GET_BUILD_INFO_CMD) {
+ bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+ edl->rtype);
+ err = -EIO;
+ goto out;
+ }
+
+ build_lbl_len = edl->data[0];
+ if (build_lbl_len <= QCA_FW_BUILD_VER_LEN - 1) {
+ memcpy(build_label, edl->data + 1, build_lbl_len);
+ *(build_label + build_lbl_len) = '\0';
+ }
+
+ hci_set_fw_info(hdev, "%s", build_label);
+
+out:
+ kfree_skb(skb);
+ return err;
+}
+
static int qca_send_reset(struct hci_dev *hdev)
{
struct sk_buff *skb;
@@ -524,6 +571,13 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
return err;
}
+ if (soc_type == QCA_WCN3991) {
+ /* get fw build info */
+ err = qca_read_fw_build_info(hdev);
+ if (err < 0)
+ return err;
+ }
+
bt_dev_info(hdev, "QCA setup on UART is completed");
return 0;
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index e73b8f8..b19add7 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -11,6 +11,7 @@
#define EDL_PATCH_CMD_LEN (1)
#define EDL_PATCH_VER_REQ_CMD (0x19)
#define EDL_PATCH_TLV_REQ_CMD (0x1E)
+#define EDL_GET_BUILD_INFO_CMD (0x20)
#define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
#define MAX_SIZE_PER_TLV_SEGMENT (243)
#define QCA_PRE_SHUTDOWN_CMD (0xFC08)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2020-12-08 11:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-08 11:55 Venkata Lakshmi Narayana Gubba [this message]
2020-12-18 21:24 ` [PATCH v4] Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1607428529-26629-1-git-send-email-gubbaven@codeaurora.org \
--to=gubbaven@codeaurora.org \
--cc=abhishekpandit@chromium.org \
--cc=bgodavar@codeaurora.org \
--cc=hbandi@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
--cc=rjliao@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).