From: Sumera Priyadarsini <sylphrenadin@gmail.com>
To: melissa.srw@gmail.com
Cc: daniel@ffwll.ch, hamohammed.sa@gmail.com,
rodrigosiqueiramelo@gmail.com, airlied@linux.ie,
mripard@kernel.org, maarten.lankhorst@linux.intel.com,
tzimmermann@suse.de, corbet@lwn.net,
dri-devel@lists.freedesktop.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3] drm/vkms: Add setup and testing information
Date: Thu, 10 Dec 2020 00:34:53 +0530 [thread overview]
Message-ID: <20201209190453.c6kp5winikr55n3i@adolin> (raw)
Update the vkms documentation to contain steps to:
- setup the vkms driver
- run tests using igt
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
___
Changes in v2:
- Change heading to title case (Daniel)
- Add examples to run tests directly (Daniel)
- Add examples to run subtests (Melissa)
Changes in v3:
- Add example using run-tests.sh script(Daniel)
---
Documentation/gpu/vkms.rst | 70 ++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
index 13bab1d93bb3..9e030c74a82e 100644
--- a/Documentation/gpu/vkms.rst
+++ b/Documentation/gpu/vkms.rst
@@ -7,6 +7,76 @@
.. kernel-doc:: drivers/gpu/drm/vkms/vkms_drv.c
:doc: vkms (Virtual Kernel Modesetting)
+Setup
+=====
+
+The VKMS driver can be setup with the following steps:
+
+To check if VKMS is loaded, run::
+
+ lsmod | grep vkms
+
+This should list the VKMS driver. If no output is obtained, then
+you need to enable and/or load the VKMS driver.
+Ensure that the VKMS driver has been set as a loadable module in your
+kernel config file. Do::
+
+ make nconfig
+
+ Go to `Device Drivers> Graphics support`
+
+ Enable `Virtual KMS (EXPERIMENTAL)`
+
+Compile and build the kernel for the changes to get reflected.
+Now, to load the driver, use::
+
+ sudo modprobe vkms
+
+On running the lsmod command now, the VKMS driver will appear listed.
+You can also observe the driver being loaded in the dmesg logs.
+
+To disable the driver, use ::
+
+ sudo modprobe -r vkms
+
+Testing With IGT
+================
+
+The IGT GPU Tools is a test suite used specifically for debugging and
+development of the DRM drivers.
+The IGT Tools can be installed from
+`here <https://gitlab.freedesktop.org/drm/igt-gpu-tools>`_ .
+
+The tests need to be run without a compositor, so you need to switch to text
+only mode. You can do this by::
+
+ sudo systemctl isolate multi-user.target
+
+To return to graphical mode, do::
+
+ sudo systemctl isolate graphical.target
+
+Once you are in text only mode, you can run tests using the --device switch
+or IGT_DEVICE variable to specify the device filter for the driver we want
+to test. IGT_DEVICE can also be used with the run-test.sh script to run the
+tests for a specific driver::
+
+ sudo ./build/tests/<name of test> --device "sys:/sys/devices/platform/vkms"
+ sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/<name of test>
+ sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./scripts/run-tests.sh -t <name of test>
+
+For example, to test the functionality of the writeback library,
+we can run the kms_writeback test::
+
+ sudo ./build/tests/kms_writeback --device "sys:/sys/devices/platform/vkms"
+ sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_writeback
+ sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./scripts/run-tests.sh -t kms_writeback
+
+You can also run subtests if you do not want to run the entire test::
+
+ sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
+ sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip
+
TODO
====
--
2.25.1
next reply other threads:[~2020-12-09 19:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-09 19:04 Sumera Priyadarsini [this message]
2020-12-09 22:17 ` [PATCH v3] drm/vkms: Add setup and testing information Daniel Vetter
2020-12-10 11:12 ` Melissa Wen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201209190453.c6kp5winikr55n3i@adolin \
--to=sylphrenadin@gmail.com \
--cc=airlied@linux.ie \
--cc=corbet@lwn.net \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hamohammed.sa@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=melissa.srw@gmail.com \
--cc=mripard@kernel.org \
--cc=rodrigosiqueiramelo@gmail.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).