From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Dmitry Osipenko <digetx@gmail.com>,
Johnny Chuang <johnny.chuang.emc@gmail.com>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH RESEND v8 2/4] input: elants: support old touch report format
Date: Fri, 11 Dec 2020 07:53:56 +0100 [thread overview]
Message-ID: <a5c0b6b300fadf9425781285351b46c6dbb4f618.1607669375.git.mirq-linux@rere.qmqm.pl> (raw)
In-Reply-To: <cover.1607669375.git.mirq-linux@rere.qmqm.pl>
Support ELAN touchpad sensor with older firmware as found on eg. Asus
Transformer Pads.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/input/touchscreen/elants_i2c.c | 36 ++++++++++++++++++--------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index d51cb910fba1..f1bf3e000e96 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -69,6 +69,7 @@
#define CMD_HEADER_REK 0x66
/* FW position data */
+#define PACKET_SIZE_OLD 40
#define PACKET_SIZE 55
#define MAX_CONTACT_NUM 10
#define FW_POS_HEADER 0
@@ -853,7 +854,8 @@ static int elants_i2c_fw_update(struct elants_data *ts)
* Event reporting.
*/
-static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
+static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf,
+ size_t report_len)
{
struct input_dev *input = ts->input;
unsigned int n_fingers;
@@ -866,7 +868,8 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
buf[FW_POS_STATE];
dev_dbg(&ts->client->dev,
- "n_fingers: %u, state: %04x\n", n_fingers, finger_state);
+ "n_fingers: %u, state: %04x, report_len: %zu\n",
+ n_fingers, finger_state, report_len);
/* Note: all fingers have the same tool type */
tool_type = buf[FW_POS_TOOL_TYPE] & BIT(0) ?
@@ -880,8 +883,16 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
pos = &buf[FW_POS_XY + i * 3];
x = (((u16)pos[0] & 0xf0) << 4) | pos[1];
y = (((u16)pos[0] & 0x0f) << 8) | pos[2];
- p = buf[FW_POS_PRESSURE + i];
- w = buf[FW_POS_WIDTH + i];
+ if (report_len == PACKET_SIZE_OLD) {
+ w = buf[FW_POS_WIDTH + i / 2];
+ w >>= 4 * (~i & 1); // little-endian-nibbles
+ w |= w << 4;
+ w |= !w;
+ p = w;
+ } else {
+ p = buf[FW_POS_PRESSURE + i];
+ w = buf[FW_POS_WIDTH + i];
+ }
dev_dbg(&ts->client->dev, "i=%d x=%d y=%d p=%d w=%d\n",
i, x, y, p, w);
@@ -913,7 +924,8 @@ static u8 elants_i2c_calculate_checksum(u8 *buf)
return checksum;
}
-static void elants_i2c_event(struct elants_data *ts, u8 *buf)
+static void elants_i2c_event(struct elants_data *ts, u8 *buf,
+ size_t report_len)
{
u8 checksum = elants_i2c_calculate_checksum(buf);
@@ -927,7 +939,7 @@ static void elants_i2c_event(struct elants_data *ts, u8 *buf)
"%s: unknown packet type: %02x\n",
__func__, buf[FW_POS_HEADER]);
else
- elants_i2c_mt_event(ts, buf);
+ elants_i2c_mt_event(ts, buf, report_len);
}
static irqreturn_t elants_i2c_irq(int irq, void *_dev)
@@ -985,7 +997,8 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
break;
case QUEUE_HEADER_SINGLE:
- elants_i2c_event(ts, &ts->buf[HEADER_SIZE]);
+ elants_i2c_event(ts, &ts->buf[HEADER_SIZE],
+ ts->buf[FW_HDR_LENGTH]);
break;
case QUEUE_HEADER_NORMAL:
@@ -998,17 +1011,18 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
}
report_len = ts->buf[FW_HDR_LENGTH] / report_count;
- if (report_len != PACKET_SIZE) {
+ if (report_len != PACKET_SIZE &&
+ report_len != PACKET_SIZE_OLD) {
dev_err(&client->dev,
- "mismatching report length: %*ph\n",
+ "unsupported report length: %*ph\n",
HEADER_SIZE, ts->buf);
break;
}
for (i = 0; i < report_count; i++) {
u8 *buf = ts->buf + HEADER_SIZE +
- i * PACKET_SIZE;
- elants_i2c_event(ts, buf);
+ i * report_len;
+ elants_i2c_event(ts, buf, report_len);
}
break;
--
2.20.1
next prev parent reply other threads:[~2020-12-11 6:55 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-11 6:53 [PATCH RESEND v8 0/4] input: elants: Support Asus TF300T and Nexus 7 touchscreens Michał Mirosław
2020-12-11 6:53 ` Michał Mirosław [this message]
2020-12-11 7:29 ` [PATCH RESEND v8 2/4] input: elants: support old touch report format Dmitry Torokhov
2020-12-11 16:09 ` Michał Mirosław
2020-12-11 16:39 ` Dmitry Osipenko
2020-12-11 17:04 ` Michał Mirosław
2020-12-11 18:48 ` Dmitry Torokhov
2021-01-07 22:06 ` Dmitry Osipenko
2021-01-22 20:10 ` Dmitry Osipenko
2021-01-22 22:37 ` Michał Mirosław
2021-01-23 14:07 ` Dmitry Osipenko
2020-12-11 6:53 ` [PATCH RESEND v8 1/4] input: elants: document some registers and values Michał Mirosław
2020-12-11 7:11 ` Dmitry Torokhov
2020-12-11 6:53 ` [PATCH RESEND v8 3/4] input: elants: read touchscreen size for EKTF3624 Michał Mirosław
2020-12-11 7:22 ` Dmitry Torokhov
2020-12-11 16:38 ` Michał Mirosław
2020-12-11 6:53 ` [PATCH RESEND v8 4/4] input: elants: support 0x66 reply opcode for reporting touches Michał Mirosław
2020-12-11 7:36 ` Dmitry Torokhov
-- strict thread matches above, loose matches on Subject: below --
2020-11-09 17:28 [PATCH RESEND v8 0/4] input: elants: Support Asus TF300T and Nexus 7 touchscreens Michał Mirosław
2020-11-09 17:28 ` [PATCH RESEND v8 2/4] input: elants: support old touch report format Michał Mirosław
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a5c0b6b300fadf9425781285351b46c6dbb4f618.1607669375.git.mirq-linux@rere.qmqm.pl \
--to=mirq-linux@rere.qmqm.pl \
--cc=digetx@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=johnny.chuang.emc@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).