[irqchip:,irq/irqchip-next] dt-bindings: interrupt-controller: update bindings for supporting more SoCs
diff mbox series

Message ID 160769872582.3364.4412521407126046603.tip-bot2@tip-bot2
State Accepted
Commit 9898a59358d7cb925f63bb77bd40224d1bc4857e
Headers show
  • [irqchip:,irq/irqchip-next] dt-bindings: interrupt-controller: update bindings for supporting more SoCs
Related show

Commit Message

tip-bot2 for Peter Zijlstra Dec. 11, 2020, 2:58 p.m. UTC
The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     9898a59358d7cb925f63bb77bd40224d1bc4857e
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/9898a59358d7cb925f63bb77bd40224d1bc4857e
Author:        Biwen Li <biwen.li@nxp.com>
AuthorDate:    Mon, 30 Nov 2020 18:15:15 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 11 Dec 2020 14:45:21 

dt-bindings: interrupt-controller: update bindings for supporting more SoCs

Update bindings for Layerscape external irqs,
support more SoCs(LS1043A, LS1046A, LS1088A,
LS208xA, LX216xA)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201130101515.27431-11-biwen.li@oss.nxp.com
 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff mbox series

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
index f0ad780..4d47df1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -1,6 +1,7 @@ 
 * Freescale Layerscape external IRQs
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
+LS1088A, LS208xA, LX216xA) support inverting
 the polarity of certain external interrupt lines.
 The device node must be a child of the node representing the
@@ -8,12 +9,15 @@  Supplemental Configuration Unit (SCFG).
 Required properties:
 - compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+  "fsl,ls1043a-extirq": for LS1043A, LS1046A.
+  "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
 - #interrupt-cells: Must be 2. The first element is the index of the
   external interrupt line. The second element is the trigger type.
 - #address-cells: Must be 0.
 - interrupt-controller: Identifies the node as an interrupt controller
 - reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG.
+  the SCFG or the External Interrupt Control Register (IRQCR) in
+  the ISC.
 - interrupt-map: Specifies the mapping from external interrupts to GIC
 - interrupt-map-mask: Must be <0xffffffff 0>.