linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Linux PM <linux-pm@vger.kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Doug Smythies <dsmythies@telus.net>,
	Giovanni Gherdovich <ggherdovich@suse.com>
Subject: [PATCH v2 3/3] cpufreq: intel_pstate: Implement the ->adjust_perf() callback
Date: Mon, 14 Dec 2020 21:09:26 +0100	[thread overview]
Message-ID: <1770942.kMzID5dSeU@kreacher> (raw)
In-Reply-To: <3827230.0GnL3RTcl1@kreacher>

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Make intel_pstate expose the ->adjust_perf() callback when it
operates in the passive mode with HWP enabled which causes the
schedutil governor to use that callback instead of ->fast_switch().

The minimum and target performance-level values passed by the
governor to ->adjust_perf() are converted to HWP.REQ.MIN and
HWP.REQ.DESIRED, respectively, which allows the processor to
adjust its configuration to maximize energy-efficiency while
providing sufficient capacity.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

v1 -> v2:
 - No changes.

---
 drivers/cpufreq/intel_pstate.c |   70 +++++++++++++++++++++++++++++++++--------
 1 file changed, 58 insertions(+), 12 deletions(-)

Index: linux-pm/drivers/cpufreq/intel_pstate.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/intel_pstate.c
+++ linux-pm/drivers/cpufreq/intel_pstate.c
@@ -2526,20 +2526,19 @@ static void intel_cpufreq_trace(struct c
 		fp_toint(cpu->iowait_boost * 100));
 }
 
-static void intel_cpufreq_adjust_hwp(struct cpudata *cpu, u32 target_pstate,
-				     bool strict, bool fast_switch)
+static void intel_cpufreq_adjust_hwp(struct cpudata *cpu, u32 min, u32 max,
+				     u32 desired, bool fast_switch)
 {
 	u64 prev = READ_ONCE(cpu->hwp_req_cached), value = prev;
 
 	value &= ~HWP_MIN_PERF(~0L);
-	value |= HWP_MIN_PERF(target_pstate);
+	value |= HWP_MIN_PERF(min);
 
-	/*
-	 * The entire MSR needs to be updated in order to update the HWP min
-	 * field in it, so opportunistically update the max too if needed.
-	 */
 	value &= ~HWP_MAX_PERF(~0L);
-	value |= HWP_MAX_PERF(strict ? target_pstate : cpu->max_perf_ratio);
+	value |= HWP_MAX_PERF(max);
+
+	value &= ~HWP_DESIRED_PERF(~0L);
+	value |= HWP_DESIRED_PERF(desired);
 
 	if (value == prev)
 		return;
@@ -2569,11 +2568,15 @@ static int intel_cpufreq_update_pstate(s
 	int old_pstate = cpu->pstate.current_pstate;
 
 	target_pstate = intel_pstate_prepare_request(cpu, target_pstate);
-	if (hwp_active)
-		intel_cpufreq_adjust_hwp(cpu, target_pstate,
-					 policy->strict_target, fast_switch);
-	else if (target_pstate != old_pstate)
+	if (hwp_active) {
+		int max_pstate = policy->strict_target ?
+					target_pstate : cpu->max_perf_ratio;
+
+		intel_cpufreq_adjust_hwp(cpu, target_pstate, max_pstate, 0,
+					 fast_switch);
+	} else if (target_pstate != old_pstate) {
 		intel_cpufreq_adjust_perf_ctl(cpu, target_pstate, fast_switch);
+	}
 
 	cpu->pstate.current_pstate = target_pstate;
 
@@ -2634,6 +2637,47 @@ static unsigned int intel_cpufreq_fast_s
 	return target_pstate * cpu->pstate.scaling;
 }
 
+static void intel_cpufreq_adjust_perf(unsigned int cpunum,
+				      unsigned long min_perf,
+				      unsigned long target_perf,
+				      unsigned long capacity)
+{
+	struct cpudata *cpu = all_cpu_data[cpunum];
+	int old_pstate = cpu->pstate.current_pstate;
+	int cap_pstate, min_pstate, max_pstate, target_pstate;
+
+	update_turbo_state();
+	cap_pstate = global.turbo_disabled ? cpu->pstate.max_pstate :
+					     cpu->pstate.turbo_pstate;
+
+	/* Optimization: Avoid unnecessary divisions. */
+
+	target_pstate = cap_pstate;
+	if (target_perf < capacity)
+		target_pstate = DIV_ROUND_UP(cap_pstate * target_perf, capacity);
+
+	min_pstate = cap_pstate;
+	if (min_perf < capacity)
+		min_pstate = DIV_ROUND_UP(cap_pstate * min_perf, capacity);
+
+	if (min_pstate < cpu->pstate.min_pstate)
+		min_pstate = cpu->pstate.min_pstate;
+
+	if (min_pstate < cpu->min_perf_ratio)
+		min_pstate = cpu->min_perf_ratio;
+
+	max_pstate = min(cap_pstate, cpu->max_perf_ratio);
+	if (max_pstate < min_pstate)
+		max_pstate = min_pstate;
+
+	target_pstate = clamp_t(int, target_pstate, min_pstate, max_pstate);
+
+	intel_cpufreq_adjust_hwp(cpu, min_pstate, max_pstate, target_pstate, true);
+
+	cpu->pstate.current_pstate = target_pstate;
+	intel_cpufreq_trace(cpu, INTEL_PSTATE_TRACE_FAST_SWITCH, old_pstate);
+}
+
 static int intel_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
 	int max_state, turbo_max, min_freq, max_freq, ret;
@@ -3032,6 +3076,8 @@ static int __init intel_pstate_init(void
 			intel_pstate.attr = hwp_cpufreq_attrs;
 			intel_cpufreq.attr = hwp_cpufreq_attrs;
 			intel_cpufreq.flags |= CPUFREQ_NEED_UPDATE_LIMITS;
+			intel_cpufreq.fast_switch = NULL;
+			intel_cpufreq.adjust_perf = intel_cpufreq_adjust_perf;
 			if (!default_driver)
 				default_driver = &intel_pstate;
 




  parent reply	other threads:[~2020-12-14 20:11 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-07 16:25 [PATCH v1 0/4] cpufreq: Allow drivers to receive more information from the governor Rafael J. Wysocki
2020-12-07 16:28 ` [PATCH v1 1/4] cpufreq: schedutil: Add util to struct sg_cpu Rafael J. Wysocki
2020-12-08  8:33   ` Viresh Kumar
2020-12-09 17:17     ` Rafael J. Wysocki
2020-12-07 16:29 ` [PATCH v1 2/4] cpufreq: schedutil: Adjust utilization instead of frequency Rafael J. Wysocki
2020-12-08  8:51   ` Viresh Kumar
2020-12-08 17:01     ` Rafael J. Wysocki
2020-12-09  5:16       ` Viresh Kumar
2020-12-09 15:32         ` Rafael J. Wysocki
2020-12-14 11:07           ` Viresh Kumar
2020-12-07 16:35 ` [PATCH v1 3/4] cpufreq: Add special-purpose fast-switching callback for drivers Rafael J. Wysocki
2020-12-08  9:02   ` Viresh Kumar
2020-12-15  4:16     ` Viresh Kumar
2020-12-15 15:38       ` Rafael J. Wysocki
2020-12-07 16:38 ` [PATCH v1 4/4] cpufreq: intel_pstate: Implement the ->adjust_perf() callback Rafael J. Wysocki
2020-12-08 12:43   ` Peter Zijlstra
2020-12-08 17:10     ` Rafael J. Wysocki
2020-12-08 16:30 ` [PATCH v1 0/4] cpufreq: Allow drivers to receive more information from the governor Giovanni Gherdovich
2020-12-08 17:13   ` Rafael J. Wysocki
2020-12-08 19:14     ` Doug Smythies
2020-12-13 19:12       ` Doug Smythies
2020-12-18 15:32       ` Peter Zijlstra
2020-12-14 20:01 ` [PATCH v2 0/3] " Rafael J. Wysocki
2020-12-14 20:04   ` [PATCH v2 1/3] cpufreq: schedutil: Add util to struct sg_cpu Rafael J. Wysocki
2020-12-14 20:08   ` [PATCH v2 2/3] cpufreq: Add special-purpose fast-switching callback for drivers Rafael J. Wysocki
2020-12-14 20:09   ` Rafael J. Wysocki [this message]
2020-12-15  3:29     ` [PATCH v2 3/3] cpufreq: intel_pstate: Implement the ->adjust_perf() callback Srinivas Pandruvada
2020-12-15  4:16   ` [PATCH v2 0/3] cpufreq: Allow drivers to receive more information from the governor Viresh Kumar
2020-12-17 15:26   ` Doug Smythies
2020-12-21 10:41     ` Rafael J. Wysocki
2020-12-18 16:11   ` Giovanni Gherdovich
2020-12-21 16:11     ` Rafael J. Wysocki
2020-12-23 13:06       ` Giovanni Gherdovich
2020-12-28 19:11         ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1770942.kMzID5dSeU@kreacher \
    --to=rjw@rjwysocki.net \
    --cc=dsmythies@telus.net \
    --cc=ggherdovich@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=srinivas.pandruvada@linux.intel.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).