From: Bean Huo <huobean@gmail.com>
To: alim.akhtar@samsung.com, avri.altman@wdc.com,
asutoshd@codeaurora.org, jejb@linux.ibm.com,
martin.petersen@oracle.com, stanley.chu@mediatek.com,
beanhuo@micron.com, bvanassche@acm.org, tomas.winkler@intel.com,
cang@codeaurora.org
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 1/7] scsi: ufs: Add "wb_on" sysfs node to control WB on/off
Date: Wed, 16 Dec 2020 00:05:13 +0100 [thread overview]
Message-ID: <20201215230519.15158-2-huobean@gmail.com> (raw)
In-Reply-To: <20201215230519.15158-1-huobean@gmail.com>
From: Bean Huo <beanhuo@micron.com>
Currently UFS WriteBooster driver uses clock scaling up/down to set
WB on/off, for the platform which doesn't support UFSHCD_CAP_CLK_SCALING,
WB will be always on. Provide a sysfs attribute to enable/disable WB
during runtime. Write 1/0 to "wb_on" sysfs node to enable/disable UFS WB.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
---
drivers/scsi/ufs/ufs-sysfs.c | 41 ++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufshcd.c | 3 +--
drivers/scsi/ufs/ufshcd.h | 2 ++
3 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index 08e72b7eef6a..f3ca3d6b82c4 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -189,6 +189,45 @@ static ssize_t auto_hibern8_store(struct device *dev,
return count;
}
+static ssize_t wb_on_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", hba->wb_enabled);
+}
+
+static ssize_t wb_on_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ unsigned int wb_enable;
+ ssize_t res;
+
+ if (ufshcd_is_clkscaling_supported(hba)) {
+ /*
+ * If the platform supports UFSHCD_CAP_CLK_SCALING, turn WB
+ * on/off will be done while clock scaling up/down.
+ */
+ dev_warn(dev, "To control WB through wb_on is not allowed!\n");
+ return -EOPNOTSUPP;
+ }
+ if (!ufshcd_is_wb_allowed(hba))
+ return -EOPNOTSUPP;
+
+ if (kstrtouint(buf, 0, &wb_enable))
+ return -EINVAL;
+
+ if (wb_enable != 0 && wb_enable != 1)
+ return -EINVAL;
+
+ pm_runtime_get_sync(hba->dev);
+ res = ufshcd_wb_ctrl(hba, wb_enable);
+ pm_runtime_put_sync(hba->dev);
+
+ return res < 0 ? res : count;
+}
+
static DEVICE_ATTR_RW(rpm_lvl);
static DEVICE_ATTR_RO(rpm_target_dev_state);
static DEVICE_ATTR_RO(rpm_target_link_state);
@@ -196,6 +235,7 @@ static DEVICE_ATTR_RW(spm_lvl);
static DEVICE_ATTR_RO(spm_target_dev_state);
static DEVICE_ATTR_RO(spm_target_link_state);
static DEVICE_ATTR_RW(auto_hibern8);
+static DEVICE_ATTR_RW(wb_on);
static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
&dev_attr_rpm_lvl.attr,
@@ -205,6 +245,7 @@ static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
&dev_attr_spm_target_dev_state.attr,
&dev_attr_spm_target_link_state.attr,
&dev_attr_auto_hibern8.attr,
+ &dev_attr_wb_on.attr,
NULL
};
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e221add25a7e..5e1dcf4de67e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -246,7 +246,6 @@ static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag);
static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba);
static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba);
-static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set);
static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable);
static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba);
@@ -5351,7 +5350,7 @@ static void ufshcd_bkops_exception_event_handler(struct ufs_hba *hba)
__func__, err);
}
-static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
+int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
{
int ret;
u8 index;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 9bb5f0ed4124..2a97006a2c93 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -1068,6 +1068,8 @@ int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
u8 *desc_buff, int *buff_len,
enum query_opcode desc_op);
+int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
+
/* Wrapper functions for safely calling variant operations */
static inline const char *ufshcd_get_var_name(struct ufs_hba *hba)
{
--
2.17.1
next prev parent reply other threads:[~2020-12-16 0:08 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-15 23:05 [PATCH v5 0/7] Several changes for UFS WriteBooster Bean Huo
2020-12-15 23:05 ` Bean Huo [this message]
2020-12-22 6:08 ` [PATCH v5 1/7] scsi: ufs: Add "wb_on" sysfs node to control WB on/off Stanley Chu
2020-12-22 6:12 ` Can Guo
2020-12-22 20:57 ` Bean Huo
2020-12-22 22:11 ` Bean Huo
2020-12-23 1:31 ` Can Guo
2020-12-23 8:28 ` Bean Huo
2020-12-23 8:30 ` Bean Huo
2020-12-23 9:11 ` Bean Huo
2020-12-22 20:50 ` Bean Huo
2020-12-22 21:08 ` Bean Huo
2020-12-23 21:52 ` Bean Huo
2020-12-15 23:05 ` [PATCH v5 2/7] docs: ABI: Add wb_on documentation for UFS sysfs Bean Huo
2020-12-15 23:05 ` [PATCH v5 3/7] scsi: ufs: Changes comment in the function ufshcd_wb_probe() Bean Huo
2020-12-15 23:05 ` [PATCH v5 4/7] scsi: ufs: Remove two WB related fields from struct ufs_dev_info Bean Huo
2020-12-16 4:15 ` Stanley Chu
2020-12-15 23:05 ` [PATCH v5 5/7] scsi: ufs: Group UFS WB related flags to " Bean Huo
2020-12-16 4:16 ` Stanley Chu
2020-12-22 6:14 ` Can Guo
2020-12-15 23:05 ` [PATCH v5 6/7] scsi: ufs: Cleanup WB buffer flush toggle implementation Bean Huo
2020-12-16 4:17 ` Stanley Chu
2020-12-22 6:14 ` Can Guo
2020-12-15 23:05 ` [PATCH v5 7/7] scsi: ufs: Keep device active mode only fWriteBoosterBufferFlushDuringHibernate == 1 Bean Huo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201215230519.15158-2-huobean@gmail.com \
--to=huobean@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stanley.chu@mediatek.com \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).